Repair, maintenance and internal painting of Bungalow No. C-3 (Type-VI BSNL Qtr.) on change of occupation in CGMT Compound, Ambala Cantt

Amount

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Polishing on wood work with ready made wax polish of approved brand and manufacture :

Old work .

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1cement: 4 fine sand).

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing C.P. brass mixer for wash basin, kitchen sinks etc. of approved quality conforming to IS standards all cpmplete as per direction of Engineer in charge.

15 mm nominal bore

Repairing the existing wooden doors, windows, Cupboards, ventilators etc. including the cost of necessary wooden members, screws, nails etc. wherever required and making in working condition complete in all respects as per the direction of Engineer in charge.

Cleaning of Glazed/Ceramic wall & floor tiles with Suitable Chemical/thinner to remove all dirty spots and stains etc. complete as per direction of Engineer-im-Charge.

Providing and fixing 10mm thick glass self in cup boards, show cases including grinding of edges all complete as per direction of Engineer-in-Charge.

Providing and fixing 19mm thick water proof Commercial plywood of approved brand & manufacture in shelves, racks, cupboards, drawers etc. including necessary nails, screws etc. all complete as per direction of Engineer in charge.

Providing powder coating to existing kitchen wire shelves including dismantling and refixing the same after powder coating with necessary screws etc. all complete as per direction of Engineer in charge.