Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹29.9 L+₹9,082.40 (0.30%)Rejected-Finance 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹31.4 L+₹1.6 L (5.33%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹31.6 L+₹1.8 L (6.11%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹32.9 L+₹3.1 L (10.4%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹38.4 L
EMD Value
₹76,740
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
SPL REPAIR TO BLDG NO T-52 08 DUs OR MD ACCN AT ARMY AREA BANAR
2023_MES_616944_1
8823/44/E8
Open Tender
Civil Works
Item Rate
180 days
BANAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer, Banar
₹76,740
Yes
23 Oct 2023
2 Sept 2023
2 Oct 2023
2 Sept 2023
30 Sept 2023
16 Sept 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.
M&L for two coats of oil bound distemper on newly plastered walls including a one coat of 1mm thick wall care putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified
M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper including a one coat of 1mm thick wall care putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified
M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified.
M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified.
M&L for 10 mm thick rendering in CM 1:3 on concrete surface/stone patti surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.
M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified.
Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.
M&L for complete removal of existing treatment on old plastered/pointed surfaces of walls including preparation and applying two coats of cement base paint over one coat of alkali resistant priming paint complete all as specified.
Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified.
M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified.
Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.
All as per item No. 17 but except stone.
Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing) and rubbish off the premises complete all as specified.
M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified.
M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor complete all as specified.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.
All as per item No 24 above but as in skirting over and incl 10mm thick rendering in CM 1:4 complete all as specified.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified.
M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform set in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade over and including 15 mm thick screed bed in CM 1:6 completed all as specified
M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified.
M&L for 5cm thickness of sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc 3 metre in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement moertar 1:4 complete all as specified.
Taking down chowkats or frames with shutters (w/o taking off shutters) or steel window/ventilator n exc 1.5 sqm each complete all as specified.
Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified.
S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete with glazing bars dovetailed or welded complete with cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified.
S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete with glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified.
S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete without glazing bars dovetailed or welded complete with cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified.
S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete without glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified.
S&F factory made steel ventilators with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded all as specified.
S&F factory made steel ventilators with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.
S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.
S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters all as specified.
S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as specified.
S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc all as specified.
M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm all as specified.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid/window/Ceosetory windows & other Frames/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat hust) and non toxic additives (maximum toxicity indes of 12 for 100 gms) fabricateed with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
M&L for 100mm long, medium weight, Stainless steel butt hinges fixed with doors and chowkats complete all as specified.
S&F Aluminum tower bolts of extruded section of size 150mm all as specified.
S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles all as specified.
M&L for pressed steel frames 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified.
M&L for pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified.
M&L for PCC (1:2:4) type B-0, using 12.50mm aggregate in filling pressed steel frame, concrete shall be compressed complete all as specified.
S&F 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match the door complete all as specified.
S&F 35mm thick factory made second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, guaze, etc (without sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified.
S&F 100mm long mild steel but hinges medium weight, cold rolled complete all as specified.
S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia width including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
S&F 150mm long MS iron handles, cast type, stove enamelled black complete all as specified.
S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.
S&F 150mm size single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified.
S&F Aluminium floor door stopper (overall length of cover plate 140mm) with suitable stops (double) fixed in wooden door to stop complete all as specified.
M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm complete all as specified.
M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified.
Taking up or down steel tubing and connection of bore 15mm complete all as specified.
S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.
Taking up or down steel tubing and connection of bore 20 mm complete all as specified.
S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.
Supply and fixing in repair 15mm dia stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, cast copper alloy chromium plated with long shank and cup (concealed type) complete all as specified.
S&F in repair 15mm dia Stop valves/angle valve, fancy type, cast copper alloy chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified.
S&F in repair CP 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.
Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified.
Supply and fixing in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified.
Supply and fixing in repairs vitreous china squatting pan, Órrisa Pattern' size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified.
Supply and fixing in repair Stainless steel kitchen plate rack 1.0mm thick of size 750 x 600 x 250mm complete all as specified.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repairs CP Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.
S&F in repair Stainless steel peg set of 5 size 300x25 & 2mm thick complete all as specified.
S&F in repairs 25 mm dia stainless steel curtain rod, fancy type/decorative type fixed to walls complete all as directed.
S&F in repairs, purpose made brackets of trade/standard pattern suitable for 25 mm dia decorative/fancy type curtain rods complete all as specified.
S&F in repairs, decorative finials (round type with mirror optic finish trade/standard pattern suitable for 25 mm dia decorative/fancy type curtain rods.
S&F in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure with all accessories complete all as specified.
M&L for PCC 1:3:6 type C2, using 40mm graded stone aggrgates as in platform to PVC water tanks complete all as specified.
Dismantling of 100mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.
Dismantling of 75 mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.
S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
S&F 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.
S&F 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, fixed in wall complete all as specified.
S&F in repairs 75mm dia CI bends (any radious) diminishing pieces or tapers (larger bore shall be measured) with oval access door complete all as specified.
S&F100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed inwith cement joints, laid in trenches or in floors complete all as specified.
S&F100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed in walls complete all as specified.
S&F 100mm dia CI Tee branch single (equal or unequal) ordinary or inverted (spigot or socket type of or with paralled branches with oval access door complete all as specified.
S&F 100mm cast iron cowl complete all as specified.
S&F in repairs 100mm cast iron 'P' or 'S' trap complete all as specified.
Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene than filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00M long GI water tubing to the wall complete all as specified and directed by Engineer-in-Charge. Note : WC and tiles shall be measured and paid separately.
M&L 50 mm thick PCC (1:3:6) type C1 (by using 20mm aggregate) in plinth protection complete all as specified.
M & L Stone Slab 25 mm to 35 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in copings, window cills, chajjas, sunshades, plinth protections etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directd, set, jointed and pointed in cement mortar 1:4 complete all as specified
M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as spd.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as spd.
M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified.
S&F in repair 32mm PVC waste pipe for sink/WHB complete all as specified.
Taking down old unserviceable point wiring ( light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified.
Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified.
Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.
Taking down ceiling fan/ exhaust fan/Wall fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, winding the fan (if required), Painting of ceiling fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified.
M&L for point wiring of One light point controlled by one, One-way switch any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with sunken boxes suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.
Alll as per item Ser No 107.00 but One fan point controlled by one, One-way switch complete all as specified.
Alll as per item Ser No 107.00 One 5 pin 5Amp Socket outlet point on same board with other switches including earth wire.
Alll as per item Ser No 107.00 One 5 pin 5Amp Socket outlet point on independent board complete all as specified.
Alll as per item Ser No 107.00 One bell/buzer point controlled by one bell push complete all as specified.
Alll as per item Ser No 107.00 One light point controlled by two 2-way switches complete all as specified.
All as per item Ser No 107.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.
All as per item Ser No 107.00 but with 4.0 sqmm single core mulfistranded copper conductor PVC(FRLS) insulated and unsheathed cable 1100v grade fixed on and including PVC casing caping fixed on wall,surfaces,ceiling etc for with 4.0sqmm single core multistandared copper conductor FRLS PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly. (for Geysers point) .
M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)
S & F piano flush type switch 5 Amps single pole complete all as specified.
S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps all as specified.
S & F switch socket combination 2 in 1,3 pin 6 &16 Amp flush type complete all as specified.
S&F ceiling rose surface type three terminals complete all as specified.
S&F bell electrical ding dong including hard PVC board complete all as specified.
Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
S & F for Bell push, flush type, 5 amp complete all as specified.
S & F piano flush type two way switch 5 Amps single pole complete all as specified.
S & F fan regulator stepped type electronic fan regulator flush type complete all as specified.
S & F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S & F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including taking down of old unservicable security light complete all as specified.
Fixing only functional old LED tube light fitting as retrieved from (Item No.1) complete all as directed by Engineer-in-charge.
S&F in replacement MCB TPN DB 4 way double door with 200 amps rated busbar 415 V, all as specified.
S&F in replacement MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, all as specified.
S & F in replacement for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.
S & F in replacement for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F in replacement for MCB double pole of rated capacity 40 to 63 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F in replacement for MCB four pole of rated capacity 40/63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F water heater storage type (Geyser) vertical mounted fixed on brick/stone wall including fashners as per site requirement with inner container of capacity 25 ltrs of glass line inner tank to prevent corrossion, Plastic outer Body,auto cut switch with PUF insulation to keep hot water for longer period, electrically operated, AC 230 Volts, BEE 5 star rated, of suitable size complete all as specified.
Material and labour for PVC connection 15mm dia of 450 length with brass nuts for cold side complete all as specified.
Material and labour for PVC connection 15mm dia of 600 length with brass nuts for hot side complete all as specified.
Supply and fix Heavy duty Metal body exhaust fan 300 mm sweep, including louvers grounting with nut bolts complete all as specified.
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete.
M & L for cutting/making of hole suitable size for 300mm exhaust fan in the stone masonary/brick wall and making good the surfaces by plastring of cement mortar and finish surface with existing wall complete all as directed.
DIWAKAR CONSTRUCTION CO.
Bhawani Enterprises
AJEET ENTERPRISES
M/s Vishaka Enterprises
NISHA CONSTRUCTIONS
Narendra General Suppliers
Kusum Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .