Improvement of water supply scheme for providing household connection to PC habitation Dehal Kharti Kudan etc in under Gram Panchayat Badsar in Tehsil Palampur District Kangra H P

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge within all leads and lifts.

Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (One cement is to four sand is to eight graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1:11/2:3(One cement is to one and half sand is to three graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

a) Foundation,footings bases of column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge.

b) Walls (any thickness) butt not less then 0.10 metre thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation up to floor two level with in all leads and lifts as per the direction of Engineer-in-charge.

c) Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centring,shuttering,strutting and propping etc.with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

a) Edges of slab and breaks in floor and walls under 20 centimetre in wide within all leads and lifts as per the direction Enginner-in-charge.

b) Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge.

c) Beams, cantilever, girder and linter sides and soffits of beams haunchings cantilevers girder, bressumers and lintel not exceeding one meter in depth in all heights from floor within all leads and lifts as per the direction of Engineer-in-charge.

Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering,strutting and propping etc.height of propping and centering below supporting floor to ceiling not exceeding 4 metrre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

a) Arches exceeding upto six metre span within all leads and lifts as per the direction Enginner-in-charge.

Providing and laying mild steel/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Manufacturing, fabrication & fixing of mild steel man hole cover of 0.60x.60 metre size made of mild steel Sheet 2.0 mm thick with mild steel angle 35x35x5mm thick with hinges one side and sliding door bolt for locking arrangement including cutting, welding and priming and Painting two coats of anamel paint sky complete in all respect to the entire satisfaction of the Engineer-in-charge.

Laying, jointing and testing in trenches galvanised iron pipe of following dia for outlets pipe scour pipe and over flow pipes etc. within all leads and lifts as per the direction of Engineer-in-charge.

a) 25 milimetre dia

b) 40 milimetre dia

c) 50 milimetre dia

d) 65 milimetre dia

Providing and fixing of cast iron sluice valve of Kirloskar/Kartar/leader/Bir make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) including brass spindal as per 2906-1984 complete with nuts bolts and rubber insertion etc. complete in all respect with in all lead and lift as per satisfaction of Engineer-in-charge.

a) 40 milimetre dia

b) 50 milimetre dia

c) 65 milimetre dia

Steel work welded in built up sections,trusses and framed work including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in gratings,framed guard bars,ladders,railing,brackets and similar type of work within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing double flanged puddle collars for making connection with reinforcement cement concrete walls of following dia within all leads and lifts as per the direction of Engineer-in-charge.

a) 25 milimetre dia

b) 40 milimetre dia

c) 50 milimetre dia

d) 65 milimetre dia

Manufacturing, fabrication & fixing of mosquito proof ventilation 800 mm height and 300 mm dia cover with dome roofing of M.S. sheet 2 mm thick, G.I mesh along circumfrences and suported on 0.25x5 mm thick including cutting, welding and priming & painting two coats of anamel paint sky blue complete in all respect to the entire satisfaction of the Engineer-in-charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (one coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads and lifts as per the direction of Engineer-in-charge.

Trigarta Integrated Services Pvt. Ltd.