MID/J/146

a)Cross Gates(6’9”X4’9”) Near D5 of Kathua Canal Annual maintenance / repair of the Cross gates installed on kathua canal by way of dismantling of winch machine (5 ton capacity) using manual labour and other tools & tackles. Straightening of stem rod by manual labour. Providing and fitting of nuts and bolts after cutting rusted one by welding.The job includes removal of garbage, cleaning of area and cleaning of Gate leaf, frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Servicing of winch machine by way of greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free.The job also includes painting of both winch machine and gate by application of one coat of metal primer & coats of standard quality paint after rubbing and scraping of the surfaces with the sand paper. Assembling of all the parts of the winch machine and its fitments and testing the gate at site and satisfactory commissioning. The job includes the cost of material, skilled and unskilled labour charges, hire charges of gas cutter, tools and tackles and carriage. Complete Job. b) Annual maintenance/ repair of below mentioned gates installed on Kathua Canal by way of removal of garbage, cleaning of area and cleaning of Gate leaf by scrubbing , frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Removal of old rusted nut, bolts.Providing and fitting of nuts and bolts and Servicing of winch machine by way of greasing and oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Job also includes fabrication of 1 no. gate operating handle of gate sno.2 The job also includes painting of both winch machine and gate by application of one coat of metal primer & coats of standard quality paint after rubbing and scraping of the surfaces with the sand paper. Assembling of all the parts of the winch machine and its fitments and testing the gate at site and satisfactory commissioning. The job includes the cost of material, skilled and unskilled labour charges, hire charges of gas cutter, tools and tackles and carriage. Complete Job. 1) Distributary Gate D1 (9' X 6')- 1No. 2)Distributary Gate D-2 (2’x3’) – 1 No. 3) Distributary Gate D-3 (5’3’’x8’) – 1 No. 4) Distributary Gate D-4 (3’6’’x6’) – 1 No. 5) Distributary Gate D-5 (2’x4’) – 1 No. 6) Distributary Gate D-7 (2’x4’) – 1 No. 7) Distributary Gate D-8 (2’x4’) – 1 No 8)Distributary Gate D-9 (2’x4’) – 1 No 9) Soonj Minor Gate (5’x4’) –1 No. 10)Boonja Minor Gate (3’9”x5’8”) -1 No. 11) Rajani Minor Gate(2' X 4')-1 No. 12)Cross Gate (6’9’’x4’9’’) near D-9 of -1 No. c) Distributary Gate of Chugal Minor (4’ X 3’): Annual maintenance/ repair of gate installed on kathua Canal by way of removal of garbage, cleaning of area and cleaning of Gate leaf by scrubbing , frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Removal of old rusted nut, bolts.Providing and fitting of bearings as per sample, nuts and bolts. Servicing of winch machine by way of greasing and oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Providing and fitting of new stem rod by cutting of helical square threads on stem rod as per sample pitch size of helical square threads of the damaged one to have a perfect constrained motion with the worm of winch machine. Fabrication of leaf structure of size 4ft x3 ft (approx.) using the ISMC75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC75 channel. Providing and welding the MS sheet of 6mm thickness on the frame of fabricated from MS channel. The Job also includes complete fabrication of outer frame MS structure of size (4’X3') by MS channel of ISMC75 consisting of groove channels, base channels and checking it for trouble free operation Job also includes fabrication of 1 no. gate operating handle of the gate. The job also includes painting of both winch machine and gate by application of one coat of metal primer& coats of standard quality paint after rubbing and scraping of the surfaces with the sand paper. Assembling of all the parts of the winch machine and its fitments and testing the gate at site and satisfactory commissioning. The job includes the cost of material, skilled and unskilled labour charges, hire charges of gas cutter, tools and tackles and carriage. Complete Job d) Head Gates (8.9’x5’) of Kathua Canal: Annual maintenance / repair of the Head gates installed on kathua canal by way of dismantling of winch machine (5 ton capacity) using manual labour and other tools & tackles. Straightening of stem rod by manual labour. Providing and fitting of nuts and bolts after cutting rusted one by welding. The job includes removal of garbage, cleaning of area and cleaning of Gate leaf, frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Servicing of winch machine by way of greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free.The job also includes painting of both winch machine and gate by application of one coat of metal primer & coats of standard quality paint after rubbing and scraping of the surfaces with the sand paper. Assembling of all the parts of the winch machine and its fitments and testing the gate at site and satisfactory commissioning. The job includes the cost of material, skilled and unskilled labour charges, hire charges of gas cutter, tools and tackles and carriage. Complete Job. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The firm shall offer rebate on old material(leaf)of Sno.3 only.

Rebate on Old Parts