Addition Alteration EE Chamber, Server room and Renovation of Ladies toilet at GF at Kalol Division office under Sabarmati circle office.

Name of work :-"Addition Alteration EE chamber, Server Room and Renovation of Ladies toilet at GF at Kalol Div

Office under Sabarmati CO"

SCHEDULE-B:- FOR CIVIL WORKS PR

SN Description Rate Unit Amount

Demolition of Brick work and stone masonry including stacking of serviceable

1 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 4.00 572.20 CMT

2 Dismentalling doors, windows, ventilators, etc. (Wood or steel shutters 1.00 195.14 NOS

including chowkhars, Architraves, Holdfasts and other attachment etc.

complete and stacking them within all lead and lift. Not exceeding

Dismantling santtary fittings like wash basin . W.C. pan Indian and European

type, flushing tank etc. including stacking the materials with all lead and lift.

4 Dismentalling tiles or stone floors/false cealing including stacking of 4.00 49.61 SMT

serviceable materials and disposal of underserviceable materials with

all lead and lift.

5 Removing dry or oil bound distemper by a washing and scraping and 56.00 11.75 SMT

sand papering the wall surface smooth including necessary repairs to

scratches complete.

PLASTER WORK/Finish Work

6 Providing 15mm thick cement plaster single coat on masonary / bela / 10.00 183.57 SMT

concrete wall / ceiling for plastering up to any floor level finished even

and smooth/Sand Face in cement mortar 1:3 (1 Cement : 3 sand)

7 Providing Distempering (Two coats) with oil bound distemper of 66.00 79.88 SMT

approved brand and manufacture and of required shade on

undercoated wall surface to give an even shade over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar

droppings and other foreign matter and also including preparing the

surface even and sand papered smooth.

Ladies Toilet Renovation

8 Providing & laying coloured glazed tiles 6mm. Thick in flooring, treads of steps 4.50 953.58 SMT

& landing laid on a bed of 12mm. Thick cement mortar (1:3) (1 cement :

coarse sand finished with flush pointing in white cement.

9 Providing & laying coloured glazed tiles of size 300 mm x 200 mm x 8 mm / 17.00 1498.30 SMT

300 mm x 450 mm x 8 mm / bigger than size shown in skirting, risers of steps

& dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and

10 Providing & fixing of Armstrong Suspended Ceiling System with PRIMA 4.50 1143.00 SMT

FINEFUSSURED tiles (Micro Look)/ Nittobo Solaton Xtra white Ginga Mineral

Fibre Ceiling. The tiles should have life long guarantee with Humidity

11 Providing & fixing of box rim pattern wall mounted cantilever type 1.00 5821.53

white/coloured vitreous china European water closet including flushing

cistern with C.P bolts, nuts, CI chair (painted with two coats of enamel paint

over a coat of primer) or other hanging arrangements, bakelite / poly

propylene soft closing seat cover with C.P. hinges & rubber buffers, connector

pipe from P/S trap to drainage pipe, brided hose pipe complete with all Nos.

accessories. Including cutting & making good the walls & floors wherever

required. The scope include the items as per specifications and product details

as under. EWC :- WALL MOUNTED CERA CAT NO: Cat. No. S1043153 P Trap

P.37 COMPACT with Cat. No. B1520102 Cintia soft close seat cover)+ Rug

BoltsCat. No. B2040102 P.37

12 Providing and Fixing water closet squatting Pan (Indiand type W.C. Pan) size 1.00 972.41

580mm (Earthwork,bed comcrete, foot reste and trap to be measured and Each

paid for separately) (A) Vitreous China. (I) Long pattern = White colour

13 Providing & fixing of first quality white/coloured vitereous china table top 1.00 3034.10

type wash basin as per product detail, including 300 mm Bottale Trap, 32mm

CP brass full thred waste coupling as per product detail, PVC pipe for waste

connection, 12mm dia & 450 mm length nominal bore heavy rating CP brass

inlet connection with unions at end for connection of angular valve to basin

as per product detail complete including fixing wash basin with counter top

by approved type poly sulphide sealent, and making good the walls where

required. The scope includes the items as per specifications and product

details as per under. Wall hung wash basin without pedestal CERA CAT NO:

Cat. No.Cat. No. S2040121 (CADAL-Snow White) page no 65 , Connection

Pipe Cera Cat No: F8070403, P.203, WASTE COUPLING: CERA ALD-F8050101

Page no. 204 OR EQU.

14 Providing Laying and jointing in true line & level 15 mm dia. U.P.V.C. pipe 25.00

(Sch 40) for cold water including fittings of make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by EIC. pipe

shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concelled as directed including necessary fittings etc and fixing the

same with adhesive solvent including cost of all materials etc complete.

15 Providing Laying and jointing in true line & level 25 mm dia. U.P.V.C. pipe 25.00

(Sch 40) for cold water including fittings of make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by EIC. pipe

shall be fixed on the wall with the help of clamp at every two meter C/C or

shall be concelled as directed including necessary fittings etc and fixing the

same with adhesive solvent including cost of all materials etc complete.

16 Providing & fixing 600mm x 450mm bevelled edge mirror of superior glas 4.00

mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plug 850.90 Nos.

with CP brass screws and washers.

17 Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 100 mm diameter 3.00

with jali of the following nominal diameter of self cleansing design with C.I.

screw down or hinged grating including cost of cutting & making good the

walls and floor

18 Providing & Fixing S.W. Gully trap with C.I. grating brick masonary chamber & 1.00

water tight C.I. cover with frame of 300mm X 300mm.size inside with

standard weight. (i) Square mouth trap (B) 150mm. X 100mm. size P or R

19 Providing and fixing to wall ceiling and floor 10.0 kg./cm2 working pressure 25.00

polythylene pipes of the following outside dia. special density, complete with

special flange compression type fittings, wall clips etc. including making good 277.46 RMT

the wall ceiling and floor.75 mm dia PVC pipe

20 Providing and fixing screw down bib taps of following size.(B) Brass chromium 3.00

plated screws down Bib Tap. (i) 15mm dia.

21 Providing and fixing brass screw down stop tap.(A) 15mm dia. 1.00 203.79 Nos.

22 Providing and fixing chromium plated brass half trun flush cock of approved 1.00

quality including fixing in pipe line etc. complete.(ii) 25mm dia. 261.16 Nos.

23 Providing and fixing pillar tap, capstan head, screw down high pressure with 1.00

screws, shanks and back nuts. (i) 15mm dia.

24 Providing and fixing standard extruded alluminum section of size 63mm x 0.25

38.10mm x 1.2mm (of Jindal Section no. 2434,@ Wt. 0.643 Kg/Rmt) with

colour powder coated alluminium frame for ventilation with 5mm thick

frosted glass as per details etc complete for louvered glass Ventilation.

25 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress 4.25

panel shutter having extra reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with injected fire retardant

grade polyurethene foam done in situ alongwith embedded wooden pieces

for stiffening & also taking hinges & fintures. The whole FRP frame & shutter 2354.22 smt

is to be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

26 Providing & fixing concealed point wiring with single PVC insulated flexible 3.00

wire 1100 volt grade copper stranded, (FR grade) ISI mark of approved quality

; using 1.5 mm thick 1"dia sized ISI mark PVC Pipe with shock proof ISI mark

standard brand switch as per instruction of E.I.C. (Excavation of cavity in wall/

ceiling, laying of PVC pipe,Drawing of copper wire lines, providing of switches, 317.00 Nos

switch board (Acralic Sheet with 4mm thick laminated sheet) socket, plug etc,

finishing the wall/ ceiling. The length of the off wire up to 5 mtr)

Notes : Rates applicable per POINT i.e NOs.

27 Providing & fixing 15Amp. 250 Volt ISI mark plug socket with switch on same 2.00

switchboard provided for item no.1 including necessary wiring & adequate

earthing wire as per specification & instructions of E.I.C. Laying of Phase wire, 364.00 Nos

(2+3 Plug socket, 2-in-1 plug socket on the board, with the switch) Rates are

applicable per POINT

28 Providing & Fixing of Fixtures for CFL/Tubelight fixtures in POP as per 4.00

instructiopn of the E-I-C.

29 FULL HEIGHT PARTITIONS above 2100mm. height. 101.00 3298.33 SMT

'Providing and fixing Aluminum partitions of minimum 60 to 70 mm

thickness having framework of 1.2mm thick aluminium extruded

section and removable tile base system including necessary wire

management system as per specification & as directed by E-I-C.

30 Supplying, Providing and fixing in position standard table having top 2.00 10112.14 Nos

surface of minimum 25mm thick Pre-Laminated MDF Board with one

side Pre-lamination and on other side 0.7mm thick lamination as per

specification & as directed by E-I-C, having necessary provision for wire

management data / computer / telephone cabling. Table having drawer

unit of size 400 x 450 X 720mm as per the specification and design

approved by Engineer-in-charge. All supporting system should be

matching with modular partition framing & final finish. Rate is inclusive

of KeyBoard tray & CPU trolley as required. b) 1500 x 750 x 750mm

31 Supplying, Providing & fixing side & back Storage cabinet having Clear 10.50 6229.98 SMT

inside storable space minimum of 380mm depth. It Should be made

from 18mm Pre-Laminated MDF Board with one side Pre-lamination

and on other side 0.7mm thick Laminate as per specification and as

directed by the E-I-C.

32 EX REVOLVING CHAIR HIGH BACK CHAIR-Class-1 2.00 6700.00 Nos

latherette seat have be made up of 10mm +/-1mm thick hot pressed mr

grade plywood seat and back two pieces -6mm outer back 12mm inner

back with form also super soft feeling with fiber.spine bracket with ms

Mechanism of Chairs are as follow:

360 deg revolving ,tilt tention adjustament which have stroke of 90+ /

5mm wich fix with 50mm dia twin wheel castors have be made of nylon

injection moulded in black colour overa ll dimention of chair (HEIGHT

MIN:1600 MM MAX 1290MM,SEAAT HEIGHT MIN-430MM TO MAX

MM ,DIMENTIONS TOLERANCE/VARIATION HAVE BE

33 VISITORS CHAIRS 7.00 2800.00 Nos

latherette seat have be made up of 8mm +/-1mm thick hot pressed mr

grade plywood seat and back two pieces -6mm outer back 12mm inner

back with form also super soft feeling with fiber bracket with plate

Mechanism of cahirs are as follow:

180 deg revolving ,tilt tention adjustament which have stroke of 90+ /

5mm wich fix with 35mm dia twin wheel castors have be made of nylon

injection moulded in black colour overa ll dimention of chair (HEIGHT

MIN:1000 MM MAX 1290MM,SEAAT HEIGHT MIN-430MM TO MAX

MM ,DIMENTIONS TOLERANCE/VARIATION HAVE BE

Part A: (Civil Work)

B Bidder's offer (+/-) in %

C Grand Total [C = A + (A*B %)]

C Grand Total [C = A + (A*B %)]

D Add 1% Welfare cess on C

E Sub Total (Incl. Welfare Cess) E=C+D

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including GST------G=E+F

G Grand Total including GST------G=E+F

Final offer (in Rs.)

Final offer (Rs. in Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications

put up by UGVCL on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We

am/are willing to carry out the work at quated rate as above.

Seal & Signature of Contractor Addl.Chief Engineer

UGVCL, CO, Sabarmati