CIVIL REPAIRING AND MAINTANANCE WORK IN VARIOUS GARDEN AND SHANTIKUNJ IN WARD NO.2 IN NEW EAST (SARTHANA)ZONE, SURAT.

NAME OF WORK :- CIVIL REPAIRING & MAINTANANCE WORK IN VARIOUS GARDEN & SHANTIKUNJ IN

WARD NO.2 IN NEW EAST (SARTHANA)ZONE, SURAT.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

PART- A CIVIL WORKS

Dismentling steel work including distempering and stacking the

maerials with all lead and lift.

Demolition including stacking of serviceable materials and

2 disposal of unserviceable materials with all lead & lift.

(i) RCC work 5.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of

serviceable materials and disposal of unserviceable materials with

all lead & lift.

(II) on Cement mortar. 20.00 577.92 C.M.

Removing the scraping of old deteriosted plaster of any

thickness from wall/R.C.C. member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift.

Dismentalling tiled of stone floors laid in mortar including stacking

5 of serviceable materials and disposal of unserviceable materials 5.00 50.11 S.M.

with all lead & lift.

Kota stone flooring and steps 5.00 50.11 S.M.

Marble 5.00 50.11 S.M.

Tiles flooring / Dedo 5.00 50.11 S.M.

Granite flooring and steps 5.00 50.11 S.M.

Dismantling doors windows ventilators etc. (wood or steel) shutters

including chowkhats, Architraves, holdfasts and other attachment

etc. comp. and stacking them within all lead & lift. (I) not

exceeding 3 sq.m. in area.

Dismantling sanitary fittings like wash basin, w.c. pan Indian and

7 Europeans type, flushing tank etc. including stacking the materials 5.00 425.93 No.

with all lead & lift.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes

8 with fittings and clamps including stacking the materials with all 20.00 78.51 R.M

lead and lift. (for any dia, of pipe)

Dismentaling of sheet roofing inlcuding ridges, Hips,

Valleys,Gutters etc. stacking of serviceable materials and disposal

of unserviceable materials with all lead and lift. (i) G.I. sheet

Removing of Collapsible Gate 1.00 101.00 No.

Removing of Rolling Shutter 1.00 101.00 EACH

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth work

concrete in base and making good the disturbed fround

10 stacking useful materials as directed and disposing as directed and 10.00 70.15 R.M

disposing of the unserviceable materials with all lead and lift.

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

11 disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

12 lift, watering etc Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 50.00 123.13 C.M.

Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 50.00 212.52 C.M.

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded

13 stone agg.40 m.m Nominal size )& curing comp. excl. cost of from 5.00 2606.92 C.M.

work in :Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8

14 graded stone agg. 40 mm nominal size) & curing comp. incl.cost of 5.00 2769.69 C.M.

form work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

15 stone agg 20m.m Nominal size)&curing comp. excl. cost of form 5.00 3095.25 C.M.

work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation,footing,Base of columns and

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

17 etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 5.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(1)Having c/s area up to 0.08 sq.mt 5.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

18 R.C.C. work incl. bending, binding & placing in position etc. 50.00 77.29 Kg.

comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Filling in foundation and plinth with murrum or selected soil in

21 layers of 20cm. thickness including watering, ramming and 200.00 301.78 C.M.

consolidating etc. complete.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

23 curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.080 sq.mt Ground Floor 1.00 12844.32 C.M.

First Floor 0.00 12885.28 C.M.

Second Floor 0.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

First Floor 0.00 11207.92 C.M.

Second Floor 0.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground

First Floor 0.00 9242.63 C.M.

Second Floor 0.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.080 sq.mt Ground Floor 1.00 9102.61 C.M.

First Floor 0.00 9143.56 C.M.

Second Floor 0.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

First Floor 0.00 8215.36 C.M.

Second Floor 0.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground

First Floor 0.00 7127.84 C.M.

Second Floor 0.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'. Ground

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'. Ground

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(4) Slabs having more than 13 cm. Thickness Ground Floor

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 1.00 9982.37 C.M.

First Floor 0.00 10023.32 C.M.

Second Floor 0.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 1.00 5576.81 C.M.

First Floor 0.00 5617.76 C.M.

Second Floor 0.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

24 curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc

Ground Floor 0.00 7698.11 C.M.

First Floor 0.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 0.00 11613.07 C.M.

First Floor 0.00 11654.03 C.M.

Second Floor 0.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

26 finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 sq.mt 1.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 1.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 6578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

27 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from 5.00 4085.83 C.M.

work in: wall caps/ copings.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

28 R.C.C. work incl. bending, binding & placing in position etc.comp.-

Ground Floor 100.00 77.29 Kg.

First Floor 0.00 78.34 Kg.

Second Floor 0.00 79.39 Kg.

Terrace (third) Floor 0.00 80.44 Kg.

Brick work using common burnt clay building bricks having

29 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar

1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 100.00 4729.83 C.M.

First Floor 0.00 5018.55 C.M.

Second Floor 0.00 5307.27 C.M.

Terrace (third) Floor 0.00 5595.99 C.M.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash

Ground Floor 50.00 712.81 S.M.

First Floor 0.00 719.37 S.M.

Second Floor 0.00 725.94 S.M.

Terrace (third) Floor 0.00 732.50 S.M.

Uncoursed rubble masonary with hard stone of approved quality

31 in foundations and plinth in cement mortar 1:6 (1 Cement : 6 30.00 2586.61 C.M.

sand) including leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand)

(A) Flush Pointing 30.00 101.89 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(B) Ruled Pointing 30.00 105.24 S.M.

Pointing on Uncoursed stone masonary with cement mortar 1:3

(1 cement : 3 Sand) ---

(A) Flush Pointing 30.00 110.24 S.M.

(B) Ruled Pointing 30.00 114.25 S.M.

Providing Rubble Pitching with hard stone of approved quality in

34 cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling 50.00 2550.00 C.M.

up ,Curing etc. complete excluding pointing

Providing and filling rubbles including hand packing and filling

35 interstices with quarry spalls behind abutments and between 50.00 1094.11 C.M.

returns as directed.

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1-Cement : 2- coarse sand : 4-graded stone aggregate

36 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire

including roughening,cleaning, fixing and finishing in cement

mortar 1:3 and curing complete. (B) 40mm thick.

Ground Floor 5.00 741.93 S.M.

First Floor 0.00 752.39 S.M.

Second Floor 0.00 762.85 S.M.

Terrace (third) Floor 0.00 773.32 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

37 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces

Ground Floor 100.00 199.28 S.M.

First Floor 0.00 228.84 S.M.

Second Floor 0.00 258.39 S.M.

Terrace (third) Floor 0.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 0.00 225.34 S.M.

First Floor 0.00 254.89 S.M.

Second Floor 0.00 284.45 S.M.

Terrace (third) Floor 0.00 314.00 S.M.

Providing & Applying 15mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed

with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar

surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick

39 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 50.00 347.42 S.M.

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

40 coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and 100.00 324.00 SM

apply roller horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

Providing 20 mm thick double coat mala cement plaster on brick

/ concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

41 in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 50.00 286.10 S.M.

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC)at junction of brick work and RCC work or two

44 dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag 20.00 102.00 S.M.

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

45 jointed with grey cement slurry mixed with pigment to match the 20.00 1019.39 S.M.

shade of slab including rubbing and polishing etc. complete. (A)

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

46 mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray 10.00 1130.79 S.M.

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring,

47 treads of steps & landings laid on a bed of 12 mm. Av. 20.00 900.29 S.M.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white

cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand)

48 including necessary cement paste for fixing and joined with white 20.00 932.02 S.M.

cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and laying Ceramic tiles 6mm thick in skrting risers of

50 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 20.00 1037.25 S.M.

coarse sand) and jointed with white cement slurry

Providing & laying marble stone slab flooring over 20 mm.av. base

of C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey cement

slurry incl. rubbing & polishing comp.(A) Marble slab 25 mm.

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

52 flush pointing in white or colour cement including rubbing and 20.00 2410.00 S.M.

polishing complete. ( Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

53 Cement : 4 Coarse sand) and finished with flush pointing in white 20.00 2449.00 S.M.

or colour cement including rubbing & polishing comp.. (Basic

Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with

54 flush pointing in white or colour cement, including rubbing & 10.00 2026.00 S.M.

polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

55 Labour Charges For Half Round Edge For Granite 5.00 150.00 R.M.

56 Labour Charges For Quater Round Edge For Granite 5.00 90.00 R.M.

57 Labour Charges For Edge Finished For Granite 20.00 43.43 R.M.

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse sand)

on new surface or fixing on existing flooring by adhesive material

58 including dismentaling of existing flooring and jointed with colour 50.00 1467.72 S.M.

cement slurry including finished with flush pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with white cement slurry.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and laying chequered precast concrete tiles 22mm

thick with aggregate of sizes upto 6mm in floors treads of steps

and landing on 20mm thick bed of C.M. 1:6 (1 cement : 6 sand) or

L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with neat cement

slurry with pigments to match the shade of the tiles.

Providing and constructing sandwitch type Polish Kota Stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including one

end side Polish Kota stone (Double Polish) of 1.25 mt. height &

front Polish Kota stone patti of 10 cm wide, vertical partitions of

half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

62 finishing smooth with cement slurry as required and Stainless Steel 0.00 3010.00 R.M.

sink of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction given by

site in charge at all

Providing and constructing sandwitch type Granite stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side

granite stone (Double Polish) of 1.25 mt. height & front granite

stone patti of 10 cm wide, vertical partitions of half B.M.

wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing

63 smooth with cement slurry as required and Stainless Steel 0.00 3128.00 Rmt.

sink of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors. (Basic rate of Granite

Providing & fixing at all floor levels,both face polished machine

cut edge green kota stone slab (30mm) for urinal partition

joined with grey cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for urinal partition joined with grey/White

65 cement slurry (1:1) incl. Rubbing & polishing etc. complete. 5.00 1050.00 S.M.

(M.R.)( Basic Cost- Rs. 450/S.M.)

Providing and laying rough chiseled dressed stone flooring over

20mm thick base of cement mortar 1:5 (1 cement : 5 coarse sand)

66 or L.M. 1:1.5 including pointing with cement mortar 1:2 (1 cement 5.00 576.79 S.M.

: 2 stone dust) etc. (A) 25mm thick

Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to

67 bring mortar creme out upto surface using white cement 50.00 779.70 Sqm.

including rounding off junctions and extending them upto 15 cm

along the wall clearing with water and oxalic acid etc. as directed.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm th.laminate

shall be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

Same as Above But Without Frame 5.00 2520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak wood

69 frames of finished size 12cm x 7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two

coats of oil painting etc. For all Floor

(A) Fully Panelled 0.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 0.00 5185.03 S.M.

(C) Fully Galzed 0.00 4836.39 S.M.

Providing and fixing 35mm thick shutters for Doors, windows

and clearstory windows including anodised alluminium butt

hinges with necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Providing and Replace door, Window S.S. Fixtures fix in wooden /

Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 873.05 No.

(J) Inter Lock [Kadaka lock] 5.00 209.71 No.

(H) Locks Godrej Mortice lock cover 5.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved

sample (30 cms)

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ along with embedded

71 wooden pieces for stiffening & also taking hinges & fixtures. The 5.00 2019.98 S.M.

whole FRP frame & shutter is to be water proof weather

proof,termite proof &resistance to mild acid/alkali. Rates are to be

inclusive of S.S.hinges with fastener sleeve & alluminium fixtures

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four track member size

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt

with sliding shutters of horizontal member size 40mm x 18mm

72 x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 5.00 2140.33 S.M.

1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

(A) Same as above but Colour anodized 5.00 2140.33 S.M.

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size

mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt.

Kg/mt) with sliding shutters of horizontal member size 40 mm x

73 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), 1.00 1591.87 S.M.

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant glass fixing to

frame as per details etc.

(A) Same as above but Colour anodized 1.00 1591.87 S.M.

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

74 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) 1.00 1705.67 S.M.

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

(A) Same as above but Colour anodized 1.00 1705.67 S.M.

Providing and fixing standared extruded ofalluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

75 Powder Coated alluminium frame for ventilation with 5 mm thick 1.00 1175.56 S.M.

frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 1.00 1175.56 S.M.

Providing and fixing standared extruded of aluminium section of

size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt.

76 Kg per mt) with Powder Coated alluminium frame with 5 mm 1.00 1833.29 S.M.

thick transparent bronze colour tinted float glass as details etc.

complete for fix window.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(A) Same as above but Colour anodized 1.00 1833.29 S.M.

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x

mm having weight 1.158 kg. / R.M. shutter section having size

83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881

77 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal 1.00 3237.00 S.M.

Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass

in acid frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-incharge

including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 1.00 3237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed

and partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all other necessary

78 fittings and fixtures. Entire work will have to be made water proof 1.00 2400.00 S.M.

using necessary rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water proof sealent.

Bottom portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as

(A) Same as above but Colour anodized 1.00 2400.00 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass

79 with crystal edge & necessary hardware materials etc. complete as 0.00 1350.00 S.M.

per instruction by engineer in charge.

Providing & laying Non reflective solar contact film for fixing on

80 glass as approved colour,design,cutting complete as per instruction 0.00 406.57 S.M.

by engineer in charge.

Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin /

Godrej / Alluminium body ISI brander equivalent make with

necessary hardware materials etc. complete as per instruction by

engineer in charge.

Providing & fixing water proof plywood (ISI marks 710 grade) at

the door,window and any space in the building. necessary

hardware,screws materials etc. complete as per instruction by

engineer in charge.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with round

headed bolts & round headed bolts and nuts or by screws incl.

Priming coat of Red lead paint etc. comp. (A) Plain grill For all

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint

Steel work welded in built up sections, framed work including

85 cutting, hoisting, fixing in position and applying a priming coat of

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed

purlins connected to common raffers & the like

(B)For work like chain link fencing, above compound wall etc.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall

Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position Purlin,

Main Chord etc. as per Engineer- in-charge.TATA / JINDAL /

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required

87 size, on the top of the floor or the side of waist slab with suitable 10.00 450.00 Kg.

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing G.I. chain link of 50mm x 50mm size x

guage thick with nuts, bolts, washer or G.I. pins, excluding M.S.

angles etc.complete as per relevent IS specification & directed by

engineer in charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed

wire fencing with necessary barbed wire (12 x 14 guage, weight

89 not less than 0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. 10.00 125.00 Kg.

complete as per relevent IS specification.& directed by engineer in

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and Fixing hot dip concertina coil of 610 mm dia. made

out of 2.59 mm (12 SWG) hot dip galvanized (G.I. coating not less

than 200 gm/sqmt.) th. wire having 80 nos. of spikes and 200 nos.

of clips made out of stainless steel (AISI 304) 1.5 mm th. dia., G.I.

strips 0.5 mm th. ( G.I. coating not less than 120 gm/sq.mt.) weight

90 of one coil should not be lesss than 15 kg. etc., complete at the top 30.00 314.00 R.M.

of compound wall fixed with S.S. clips and binding wires

whereever necessary etc. complete. ( NOTE: Strctching length of

one coil should not be more than 9 mt.)

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled with white lead etc. Excluding the cost of purlins

rafter and trusses. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled

92 with white lead complete excluding the cost of purlins, 50.00 734.19 S.M.

Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled with

white lead complete excluding the cost of purlins, Rafters and

Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or equivalent)

(ii) 0.63mm THick Sheet 100.00 1016.00 S.M.

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x

3mm size bolts, nuts, washers etc. including marking necessary

94 connection with rain water pipes. 10.00 581.32 R.M.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed

with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I.

limpet and bitumen washer

complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

96 size bolts, nuts, washers etc. including marking necessary 50.00 412.00 R.M.

connection with rain water pipes. (i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed

with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and

bitumen washer complete (1) 0.63mm thick sheet

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing UV stabilise FRP Sheet roofing with

overlapping the main cladding on both edges. All fixing holes must

be predrilled oversize as specified for the sheet length and fastener

being used. Fasteners must be fitted with approved washers.

Fixings should be tightened to ensure a weatherproof seal but they

must not be over tightened Side-lap fasteners must also be installed

at specified centers with the FRP sheet having clearance holes

98 provided as per the main fasteners Weatherproofing shall be

provided at all flashing points under the normal flashing by the

fitting of a foam closure strip to match the profile being used.

Closure strips will be sealed to the sheet with an appropriate non

setting silicone sealant. Excluding the cost of purlins rafter and

(b) 2 mm thick 10.00 1100.00 S.M.

Providing & Fixing Polycarbonate sheet roofing with surface of

the sheet is coated with an anti-UV Co-extrusion layer having good

weather resistance, it can maintain its optical properties and

mechanical performance for a long time. Fasting is usually done by

screws. , The fastening screws should be inserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and

99 edge pulin.All fixing holes with diameter at least 2 mm

larger than screw must be predrilled into each screw location. The

screws should be 6mm diameter with length according to sheet

thickness and corrosion resistant, with at least heavy duty hot

dripped galvanized or stainless steel. Excluding the cost of purlins

rafter and trusses.

(a) 1.5 mm thick Solid Sheet 10.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 10.00 1510.00 S.M.

Providing & Fixing 80 mm dia M.S. pipe as vertical post are

beded in 1:1.5:3 concrete also horizontaly in line and connecting to

purline angle etc by welding rereting etc. (a) Medium duty "B"

Providing & Fixing 50 mm dia M.S. pipe as vertical post are

beded in 1:1.5:3 concrete also horizontaly in line and connecting to

purline angle etc by welding rereting etc. (a) Medium duty "B"

Providing and fixing rolling shutters of approved make made of

80 mm wide M.S. laths inter locked together through their entire

lenght and jointed together at the ends by end locks mounted on

102 specially designed pipe shaft with bracket plates, guide channels

and arrangements for inside and outside locking with push-pull

operation including the cost of hood cover and spring etc. complete

(A) Shutters having width below 3.5m 0.00 3554.40 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing rolling shutters of approved make made of

80 mm wide M.S. laths inter locked together through their entire

lenght and jointed together at the ends by end locks mounted

on specially designed pipe shaft with bracket plates, guide

103 channels and arrangements for inside and outside locking with 0.00 4546.01 Smt.

push-pull operation including the cost of hood cover and spring

etc. complete. (B) Shutters having width 3.5 M and above

Providing and fixing hard drawn steel wire fabric 75mmx25mm

mesh or weight not less than 7.75 kg.per Sq.M. to window frames

etc. including 60x 20mm beading of teak wood.

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S.

bar bent to shpe with hooked ends to RCC slabs curing, layig

including painting the exposed portion of loops, all as per standard

design complete.

Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall

surface to give an even shade over and & including a priming

coat of alkali resistance primer of approved brand after throughly

brushing the surface to give an even shade after throughly brushing

the surface free from mortar droppings and other foreign matter

and also including preparing the surface even and smooth.

(A) For wall 500.00 75.84 S.M.

(B) For ceilings 10.00 84.37 S.M.

--do---- Extra Subsequant coat over above Item

(A) For wall 500.00 31.91 S.M.

(B) For ceilings 10.00 35.25 S.M.

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

108 including thoroughly brushing the surface free from mortar 300.00 40.59 S.M.

dropping and other matter and sand papered smooth.

Distempering two coats on previously distempering wall

(without primer) with oil bound washable distemper of approved

brand & required shade on wall surface to give an even shade after

throughly brushing the surfaces clean of all grease, dirt loose

places of sceles & also including preparing the surface even and

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

110 even shade including throughly brushing the surface free from 150.00 83.36 S.M.

mortar droppings and other foreign matter and sand papered

For every subsequent coat Extra over item no.above 50.00 35.41 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Applying Priming coat over new steel and other metal surface

after over and including preparing the surface by throughly

111 cleaning oil, grease dirt and other foreign matter and scoured with 100.00 36.74 S.M.

brushed fine steel wool, scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats of enamel paint (Excluding priming coat)

over previously painted wall after removing entire surface with

even shade & surface after removing dirt, dust foreign matter etc.

Painting two coats of enamel paint over priming coat (including

priming coat) on wall after removing entire surface dirt, dust

foreign matter & also incl. preparing the surface even & sand

papered smooth etc. comp.(M.R.)

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by

brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly scraped

off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt. lead.

Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator machine

including watering and filling in depressions which occur during

the process as directed by engineer in charge.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

Providing, Supplying & Sprading of Gravel in Play area including

dressing etc. comp.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm

compacted thickness over the base including necessary

119 compaction, watering etc. complete. Item includes leveling by 200.00 413.09 C.M.

using vibratory plates compacted machine and as directed by

engineer in charge.

Providing & laying Granular sub base (GSB)confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid with

mechanical means spreading with motor grader and compacting

120 with vibratory roller having minimum 80-100 KN static weight to 200.00 1469.00 C.M.

acheve desired density of 98% of MDD including all material,

labour, machinery with all leads and lift etc. complete.

Removing & resetting existing readymade c.c. kerb stone of

required size & thickness in line .level and in truly vertical position

including filling joints in C.M. 1:1 (1 part of cement : 1 part of

121 stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part 500.00 56.00 R.M.

of coarse sand) including watering etc. complete and as directed by

engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with

122 necessary sand / pana filling and make in line and level with 500.00 102.00 S.M.

necessary vibrating using compactor machine.

Providing 100mm thick readymade C.C. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

123 vertical position, including filling joints in C.M. 1:1 (1 part of 500.00 228.00 R.M.

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part

of cement : 1 part of coarse sand) including watering etc. complete

and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 274.00 R.M.

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments,tools, plants, watering,

cleaning etc. complete.

With colour 500.00 524.00 S.M.

Without colour 500.00 524.00 S.M.

Providing & fixing interlocking type Cement Concrete paver

block of approved shape & design having 60 mm thickness (M-40)

purchased from SMC's approved paverblock manufacturer only on

125 fine sand bedding. Item includes leveling by using vibratory plates 500.00 553.00 S.M.

compacted machine. Item also includes all materials, Labour,

euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 50.00 714.00 S.M.

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying cement concrete Pavement using 1:2:4 (1

cement:2 sand:4 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared sub

base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total

129 thickness with filling of epoxy sealent as directed by engineer in 100.00 50.00 R.MT

WATER SUPPLY & SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size "P'or

"S" trap for water closet squatting pan joining the trap with the

130 pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. 20.00 1471.41 No.

Comp.(A) Vitreous china long pattern of approved colour For all

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap including jointing the trap with

soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (seat

and cover to be measured and paid for separately) (A) Viterous

china pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash down water

132 closet with C.P. brass hinges and rubber buffers (B) Plastic seat 20.00 291.33 No.

Providing & fixing wash basin with single hole for pillar tap at all

floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same incl. fittings such as pillar tap,

capstan head screw down high pressure with screws, shanks &

back nuts, C.P. Brass waste trap, screw down stop tap 15 mm.

dia. etc. complete. (A) Vitreous china flat back wash basin

mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting

the Urinal with waste pipe, tap etc. complete. (A) White

earthenware flat back or corner type size 430 mm x 260mm x

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at

all floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet

& fixed to wooden plugs with C.P.brass screws and washers etc.

Providing & Fixing C.P. Brass screw down bib tap at all floor

136 levels, polished bright etc. comp.-(A) 15mm dia. For all Floors 50.00 186.83 No.

Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan)

at all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or

138 "S" trap for water closet squatting pan joining the trap with the pan

& soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A)

Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat cover L

139 bend ncluding jointing the trap with soil pipe in cement mortar 1:1

(1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ 10.00 3530.09 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5)chamber & water tight C.I. cover with frame of

300mmx300mm size (inside) with weight includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 100mm x 100mm Size -P type

(A) 100mm x 100mm Size -P type 5.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5)chamber & water tight Pre cast R.C.C.

cover of 300mmx300mm size (inside) includ. plastering smooth

141 inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps--

(A) 300mm x 300mm Size -P type 5.00 1098.05 No.

(B) 150mm x 100mm Size- P Type 0.00 1052.77 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C.

142 top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone 1.00 3166.77 No.

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I.

cover with frame to be not less than 38 kg. On top etc. comp. for

.(A).Same as above but Precast RCC heavy duty Cover instead of

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 233.85 Each

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix

( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

143 ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be 10.00 2932.93 No.

not less than 38 kg. On top etc. comp. Inside dimension,455 x

mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

144 spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make -Cera,Parry ware, Jaquar, HindwareMake- CeraCat. No.

S4020103, Parry ware C0501*, Jaquar URS-WHT- 13261H 5.00 2535.70 No.

,HindWare BACK SMALL

Providing & fixing Wash Hung basin with single hole for pillar

tap, Size- 550 x 400 mm at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes & making good the same

etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN-

1121N ,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long approved make

147 including, providing & fixing C.P. brass screws, making holes in

walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar

1111BSM ,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of

148 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

Prov.& Fixing Health Faucet ABS Body with wall Hook and

Meter chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587

,HindWare F160109

Providing & Fixing 15 mm Dia bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 1.00 1353.77 No.

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at

all floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

Providing Metropole Flush Valve Dual Flow 40mm Size

(Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing flush cock consisting lever, cartridge sleeve & flange &

153 concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 ,Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN

, CONCEALED BODY ALD-081,HindWare F280052 &

CONCEALED STOP COCK F850105

Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts, washer

and brass flange complete, including cutting and making good the

wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

Providing & fixing of overhead shower 80 mm (3”) dia with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989

,HindWare 0.00 1526.42 NO.

Cat. No.: F160144

156 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-

,HindWare F650013

Providing and fixing C.P. Brass pillar cock with copper

connection ,C.P. Brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare

Cat. No.: F650003, Jaquar FLR-5011N

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In

158 C.M. 1:1 of following nominal internal diameters incl. Testing of

pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

MAKE of the following nominal bore & tube fittings etc. comp..

Providing & Fixing to wall, ceiling floor at all floor levels,

galvanised mild steel tubes(medium grade) TATA / ZENITH /

160 ASIAN / JINDAL MAKE of the following nominal bore, tube,

fittings & clamps incl. making good the wall ceiling and floor etc.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete.

Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm

163 Providing and fixing Supply Pipe for Washbasin or sink 20.00 80.00 No.

Providing and fixing Jet Sprey Cock at all floor level etc. complete.

165 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex

make for soil and waste discharge system at all floor levels incl.

All fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

168 for rain water at all floor levels incl. fixtures like bends, tees, shoe

etc joined with resin of approved brand & manufacture etc. comp.

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by angineer-in-

charge. Pipe shall be fixed on the wall the help of clamp at every

169 two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on

170 the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal diameter

171 of self cleaning design with C.I. scread down or hinged grating 10.00 586.27 No.

including the cost of cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

172 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing M.S. Holder Bat clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting

holes & making good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor levels

of approved design to C.I. Or S.C.I pipes including the cost of

cutting holes & making good the wall etc. Complete - 100 mm. dia.

Providing & fixing Z - clamps at all floor levels of approved design

to C.I. S.C.I. or PVC pipes including the cost of cutting holes &

making good the wall etc. Complete - 100 mm dia as per architect

(C) 110 mm dia to upto 150 mm dia 1.00 90.00 No.

(C) 150 mm to 200 mm dia 1.00 98.00 No.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg thickness(CM

1:3 [1 cement :3 coarse sand]) finishing as per instruction given by

Eng. incharge. for

(A) 75 mm PVC PIPE 10.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10.00 180.00 R.M.

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

necessary fittings & connection etc. complete on terrace.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top,

bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C

1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

178 inside R.C.C. pardi as per design, 10mm.th. water proofing cement

plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all

inner face & bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out pipe arrangement

as necessary & C.I. Cover 0.60 x .045 weight not less then 35kg.

etc. com. as per structural drawing excluding Steel & as directed

by Engineerin- charge

Underground tank 1000.00 6.87 Lit.

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps

etc.with cinder or fly ash as directed by Engineer in charge etc.

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

180 proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of : (a) I course of applying cement slurry @

kg/sqm mixed with water proofing compound conforming to IS :

2645 in recommended proportions. (b) II course of a layer of

plaster in C.M. 1:3 with water proofing compound confirming to

IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level,

water proofing plaster about 18 mm. th' be continued on the walls 50.00 296.00 S.M.

above the floor level for a height of 600 mm. with surface suitable

to receive further treatment (c) Finishing top with stone aggregate

10mm to 12mm nominal size spreading @0.008 C.M./S.M.,

thoroughly embedad in plaster layer. as per specifications &

instructions of Engineer in charge (Cement consumption

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment. (b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

proprietary water proofing compound conforming to IS:2645 ,brick 50.00 511.00 S.M.

bats is finally covered by jointless cement plaster 20mm th. in

C.M. 1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and specified

by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions. (b)

II corse of 20mm cement plaster 1:3 mixed with water proofing

181 compound in recommended proportion (c) III course of applying 10.00 505.00 S.M.

blown or / resideal bitumen applied hot at 1.7 kg per sqm of area.

(d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints

of PVC sheet should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

Providing cement vata (10 cm x 10 cm size) quarter round in

182 cement mortar 1:1 including neat cement finishing, watering etc. 50.00 24.28 R.M

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm

Providing & Fixing chromium plated brass half turn flush cock at

184 all floor levels, of approved quality incl. fixing in pipe line etc. 10.00 263.77 No.

Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities

directed etc. comp. (A) 25 mm. dia.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing 3 mm thick metal sheet with CNC

cutting to fix it on vertical surface.Steel work welded in built up

sections, framed work including cutting, hoisting, fixing in position

186 and applying a priming coat of red lead paint in beams & joists 10.00 2677.00 Smt.

channels angles, tees, flats with connection plates or angle cleats as

in main & cross beams, hip & trussed purlins connected to

common raffers & the like.

Providing & fixing black board on walls of 1.8mt.x1.2mtsize

made up to 12 mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) fixed with teak wood

beading of 65 mmx 50mm size, rubbing & sanding comp., incl.

187 applying two coats of black board paint over a priming coat on 0.00 4193.00 No.

plywood & French polishing the frame all round etc. Comp. as per

instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6"

with table top 18mm thick (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) commercial plywood with 1.0mm

thick lamination sheet fitting with teakwood moulding table top

188 supported on 3" x 3" teakwood leg & 3" x 11/2" teakwood framing 0.00 14774.00 No.

top and bottom with french polish labour work hardware etc. as per

site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial

plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock

or century) )with 1.0mm thick lamination sheet table top supported

on 2" x 2" teakwood leg & make 3 nos. drawers of 1' 3" width on

189 both side with necessary french polish hardware labour etc. as per 0.00 8390.00 No.

site incharge instruction and as per drawing ( Size 4' x 2'-6" x

2'-6", all framing other then legs are teak wood of size 2" x 1")

Providing & fixing Green board on walls of 1.8mt.x1.2mt size

made up to 18 mm th.ply (using IS 710 Marin ply) with 1 mm thick

outside green board & 0.8mm backside white laminate & with

190 good Quality of adhesive with appropriate fittings of Alluminium 0.00 5195.00 No.

fittings or teak wood bedding 65 mmx 50mm size, rubbing &

sanding comp., as per instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size of

12mm thick with appropriate fittings and Alluminium fittings

comp., as per instruction of Engineer in charge (M.R.)

Providing & Fixing simple 12mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal

partition, supported 2" x 1" framing with necessary french polish

hardware labour etc. as per site incharge instruction and as per

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

magazine stand of Size 6' x 4' with 3" x 11/2" vertical supporting

193 and adjustable lag support and horizontal simple 2" x 1" teakwood 0.00 6745.00 No.

patti for magazine support with necessary french polish hardware

labour etc.as per site in charges instruction and as per drawing.

Cutting out cracks of wall or terrace to V section ,cleaningout,

194 grouting with cement and sand slurry 1:3 (1 cement : 3 sand ). at 5.00 65.23 R.M.

Providing and fixing Soft Pin Board With Aluminium Frame As

195 per Design by architech and engineering in charge for Fix Soft Pin 5.00 375.00 S.M.

Providing & fixing of 50% Blackout window curtain (Diamond

Pattern) with Cloth aster with S.S. 25mm Hollow Pipe With

Covers.As per attached drawing & instructed by in charge

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size

of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to form agrid

of 1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form

198 GYPSUM CEILING

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Supplying and Fixing of Suspended ceiling system components

which includes Single Layer Boarding with 12.5mm thick USG

Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange

of 20mm and another flange of 30mm and a web of 28mm) screw

fixed to brick wall/partition with the help of approved screws at

600mm centers. Then suspending of USG Boral Thundersteel

Intermediate channel (45mm x 0.90mm thick with two flanges of

15mm each) from the soffit at 1220mm centers with of USG Boral

Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to

RCC Slab with of USG Boral Soffit Cleat (37x27x25x1.6mm

thick) and 8mm dia 40mm long Anchor Fastener @ 600mm

Centers, respectively. USG Boral Thundersteel Ceiling Section

(having web of 51 mm and two flanges of 27mm each) are then

fixed to the of USG Boral Thundersteel Intermediate channel with

the help of connecting clip (2.6mm Dia) and in perpendicular

direction to the USG Boral Thundersteel intermediate channel at

457mm centers. USG Boral Thundersteel profiles are rolled with

AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal

conforming to IS 513:2016 as per IS 15961:2017/ AS

1397:2001).12.5mm thick USG Boral Standard Plasterboards

(confirming to IS 2095 Part 1) is screw fixed with 25mm long

199 CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using aluminium

channel & pipe, screws etc. complete with all material, labour with

all lead, lift and transport. and finished by approved shade of

plastic paint (Basic Rate for 8 mm plain cement sheet :

rs./sqft.)and finished and complete the work satisfactorily as per

instruction of architect or Engineer-in charge And as per "

Architecture" detail.

Providing and filling Epoxy grout of approved or suggested brand

by consultant / Engineer in charge in 4mm to 6mm thick tiles joint

including spacer with cleaning of joint by vacuum or blower etc

Applying polymer modify mortar in proportion at 1:2(one part

cement: 2 part white sand(sweet water) with chemical(SBR)

dosage of minimum 5 litre pe bag of cement. Also apply bonding

201 agent prior to polymer modify mortar in proportion of (1:1)(1 part

SBR : 1 part cement) using Roof, MC and FOSROC

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

Crack Repairs:-Crack filling using fiber reinforced polymer

modified mortar after openning crack in "V" grove, Making

Surface dust free, with a bond coat of polymer as per the data sheet

for crack repairing cracks less than 8mm

Cutting out cracks of roof terrace to V- section , cleaning

203 out, wetting , grouting with cement and sand slurry 1:3 (1- 5.00 65.23 Rmt

cement 3-sand )

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing G.i mesh 25X25X3mm used for celling repair

204 fixed with celling rebar column as per directed by enginner 5.00 546.00 S.M.

incharge rate excluding the rebar cost .

Providing and filling the expansion joint by polymer confirm to

BS4254-1983 as per required shade and specification by making

groove of 50 mmx12.5mm lather by cutting or by repairing

204 groove and removing mortar dropor anyother foreign materials

including applying primer and filling required size (over size of

joint PU foam etc. complete.)

Providing and fixing rebar of following diameter using chemical

grout of Swanchore/Hilti/Fischer or equivalent make including cost

of all equipments, tools, material, labour, etc. Standard procedure

as mentioned in manufacturer's specifications shall be strictly

followed, which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include cost of

drilling of hole of required diameter and depth as

205 mentioned in manufacturer's specification, cleaning the hole with

required air blower and other necessary tools and tackles,

positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc.

complete. Item includes necessary scaffolding, staging, labour,

tools and equipments, etc. complete as directed by the engineer-

(D) 16 mmm dia 0.00 190.00 No.

(E) 20 mmm dia 0.00 340.00 No.

(F) 25 mmm dia 0.00 500.00 No.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with ISI

specification. Using Chlordene and Chiorpurfiles 20 EC. As

206 per 6131_paret-II Consentration Weight one percent is 10.00 87.03 Smt.

recommended i.e. one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 litre chemical / Sqm of surface

is recommended as per IS.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Anti-Termite System:Providing and laying of permanent

piping technology anti-termite treatment before flooring

work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt

pressure compensation chip every 30 cm interval in the tube,

having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be

installed at the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm under floor at

207 every 2 to 3 mtr. c/c distance (adjusted as per building layout ) 5.00 134.33 S.M.

& Ends of loop pass through a PVC elbow of minimum 32 mm

ID at junction box of wall and floor level, entering into a

steel reinforced grooved flexible pipe of minimum 22 mm ID

leading into junction box and the loops shall terminate in

junction boxes & test every junction during injecting

chemicals for termite control treatment. The anti termite

chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT.

RCC Core Cutting is about making precise, circular cuts for

creating holes of required diameters for Rehabilitation in civil

208 works. The core drilling rod is fitted with diamond pieces at the

drilling end. The core cutting machine can be used for both

horizontal and vertical hole making purposes.

Providing, supplying & placing precast RCC Woodeny benches as per

given specifications. (Seating plank dimensions : Seating Length of the

Bench 1380 mm, Seating width of the Bench : 450 mm, Seating height of

the Bench : 450 mm, Seating plank thickness : 60 mm, Total height of the

Bench : 900 mm. )

M-30 grade of Concrete using vibration compaction process. Benches

consists of 2 Nos. L-shape base support in wooden texture and 1 Nos.

flate back and 1 Nos. bottom plank leg thickness :90 mm, Leg hight :

mm, Leg width : 600 mm, backside plank width : 350 mm, backside

209 plank length : 1380 mm, backside plank thickness : 60 mm. 10.00 3927.00 No.

Bench top and back planks are treated with special anticorrosive, water

coating, prevent sun, rain, light and fungal attack, as to make surfaces

and water proof.

The back rest should show as details given by SMC in embossed at

Providing & applying painting two coats at all floor levels on new

steel other metal surface with Epoxy paint, brushing interior to

210 give an even shade incl. cleaning the surface of all dirt, dust & 0.00 215.00 S.M.

other foreign matter etc. comp. (A) For All type of steel Structure

for all floor .

Providing & Fixing Dustbin as per drawing & specification

directed by engineer in charge.

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.