T-09/EDCP/2024-25

Amount

Opening/disconnecting all connections from fallen PCC/ST pole and streghtening of single PCC/ST Pole of LT/HT line along with all fitting/connections of all accessories, earthing fitting required shall be used from damage pole with reconnect of consumers connection from LT distribution box.

The work of safe carriage of the following material from Pilibhit store center to work site under the jurisdiction of EDD-Bisalpur. Approx. distance upto 60 Km. Including safe loading and unloading.

PCC Pole 8.5 /9.0 meter long.

STP 9/11 Mtr Long

Line material i.e., cross arm/ conductor/ pin insulater/stay/earthing rod/Disc Fitting/Disc Insulators/11 KV XLPE Cable, GI wire etc

Erection of new PCC/ST pole in H.T/L.T lines including fitting of all required accessories as per RESSPO Norms (Nut & bolt, all type clamps, stone pad etc. provided by contractor.

Single PCC Pole 8.5/9.0 meter long.

Single STP 9/11 Mtr Long

Double PCC Pole structure

Carriage and Re-sagging of ACSR Weasel/Raccoon conductor in 3 phase circuit both side span of erected pole HT/LT (ACSR Weasel/Raccoon conductor provided by department and other required clamps, nutbolt etc. provided by Contractor )

Carriage and Re-laying of AB cable in both side span of erected pole HT/LT (AB Cable provided by department and other required clamps, nutbolt, hook and connector etc. provided by Contractor ).

Concreting of PCC/ST Pole supports in 1:4:8 ratio and Plinthing of supports up to 300mm above ground level by using cement, brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly up to proper setting of Plinthing for STP/PCC Pole Grouting. All material would be provided by the contractor.

Complete work of Pole earthing by MS rod from store to site ( MS rod provided by department).

Carriage and Laying of single circuit 11 KV / 33 KV XLPE cable from store to site including digging of trench up to 1.5 Mtr. depth, sand bricks, top and both side of cable including re filling of trench. (All material provided by contractor accept cable)

Replacement of damage disc insulator of 33/11 KV line including carriage of insulator from JE store to site (disc insulator provided by department.)

Cutting and chopping of tree branches in the way of 33 and 11 KV HT/LT lines.

Erarthing by boaring type upto water level 30 fit by providing GI pipe and welding of strip from boaring site to nutral and body of T/F. All the material, fabrication provided by contractor on his cost. Complete in all respect.

Termination of 11 KV cable heat shrinkable type jointing kit/ termination kit suitable 11 KV cables of the following sizes after removal of faults (suitable jointing kit will be provided by the department.)

3x70/ 3x120/3x185 sqm XLPE cable O/D and I/D

3x240/ 300 sqm XLPE cable O/D and I/D

11 KV straight though 3x120/3x185

Termination of 33 KV cable heat shrinkable type jointing kit / termination of kit suitable for 33 KV cable of following size after removal of faults (suitable jointing kit will be provided by the department.)

3x300 sqm XLPE cable O/D and I/D

3x120 sqm XLPE cable O/D and I/D

3x120 / 3x300 sqm XLPE cable straight through

Carriage of received back material/Scrap from site under EDD-Bisalpur to store centre-Pilibhit.

M A ELECTRICALS

M/S HINA ELECTRICALS