Taluka Panchayat Furniture work

Name of Work :- Construction of Taluka panchayat office Building (Furniture Work) At

Palitana, Tal. Palitana Dist. Bhavnagar

Bill of Quantities

Memorandum showing items of works to be carried out

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

1 24.00 Sqm Providing making & supplying 11729.13 Rupees One

wooden Executive Table of required Eleven Squere

size of approved design and as per Thousand Seven metre

detail drawing using 19 mm thick Hundred

water proof ply wood in top,side,front Twenty Nine

and support with 1.0 mm thick and Paise

laminate off approved pattern, colour, Thirteen only

texture,the rest of the inside

surfaces,shelves, back and the top

shall be finished with 0.8 mm white

laminates of approved make, teak

wood framingshall be used wherever

necessary with all steel finish brass

hardware fittings,fastners, 3 coat of

melamine polish on

woodenpart,glass,glass work i.e.

acid,frosting on top,front as per detail

drawings,key board trays,drawer with

SS sliding channels,cabale tray under

table,table top pop up with RJ45

RJ11,5Amp universal plug of legrand

or eq. make etc. complete as per detail

drawing and as directed by Engineer-

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

2 54.00 Sqm Providing making & supplying wooden 13970.32 Rupees One

work station of requred persons clusters Thirteen Squere

of design as per detail drawing using 19 Thousand Nine metre

mm thick water proof ply wood of Hundred

approved quality in top, side, front, Seventy and

shutter and support with 1.0 mm thick Paise Thirty

laminate of approved quality and Two only

pattern,colour,texture,the rest of the

inside surfaces,shelves,back and the top

shall be finised with 0.80 mm thick white

laminates of approved make,wooden

framing shall be used wherever necessary

with all steel finish brass hardware

fittings,fasteners,3 coats of melamine

polish on wooden part, glass,glass work

i.e. acid,frosting on top, front as per

detail drawings, key board trays,drawers

with SS sliding channels,cable tray inside

table,table top pop up with

RJ45,RJ11,5Amp universl plug of

legrand or eq. make, 50mm thick and

1.20m high partition at front,end and

center of clusters etc. complete as per

detail drawing and as directed by

Engineer-in-Charge.(Note: For payment

lenth and width of top will be multiplied).

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

3 7.00 Sqm providing, making & supplying wooden 7143.73 Rupees Seven One

Conferrence / Seminar table having top Thousand One Squere

38mm and of required size and design as Hundred Forty metre

per detail drawing using 19 mm thick ply Three and Paise

wood of approved brand in top,side,front Seventy Three

and support & covered with 1.0 mm thick only

laminate of approved

make,pattern,colour,texture and teak

wood/white beach pattern, the rest of

inside surfaces,shelves,back and the top

shall be finised with 1 mm laminates of

approved make & pattern,wooden

framing shall be used wherever necessary

with all steel finish brass hardware

fittings, fastners, 3 coat of melamine

polish on wooden part, glass, glas work

i.e. acid,frostin on top,front as per detail

drawings,key board trays,drawers with

SS sliding channels,cabale tray under

table,table top pop up with

RJ45,RJ11,%amp universal plug of

legrand or eq. make etc. complete as per

detail drawing and directed by Engineer-

in-Chrge.(Note: For payment lenth and

width of table top will be measured)

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

4 123.00 Sqm providing, making & supplying wooden 9446.53 Rupees Nine One

cup boards/side table of size and design Thousand Four Squere

as per detail drawing using 19 mm thick Hundred Forty metre

BWP grade ply wood of IS 710 of Six and Paise

approved brand in top,side,front and Fifty Three only

support & covered with 1.0 mm thick

laminate of approved

make,pattern,colour,texture and teak

wood/white beach pattern, the rest of

inside surfaces,shelves,back and the top

shall be finised with 1 mm laminates of

approved make & pattern,wooden

framing shall be used wherever necessary

with all steel finish brass hardware

fittings, i.e. handles,locks,magnet,auto

stoppers,hinges,channel, fastners, 3 coat

of melamine polish on wooden part,

glass, glas work i.e. acid,frostin on

top,front as per detail drawings,key board

trays,drawers with SS sliding

channels,cabale tray inside etc. complete

as per detail drawings and architect's

instructions.(Note: For payment height

and width will be measured)

5 6.00 No Providing and supplying powder 15150.00 Rupees One

coated/Chrome plated hydraulic Fifteen Number

Revolving Synchronic High Back Thousand One

chair of approved make ergonomic Hundred Fifty

design using M.S.pipe/carbon frame and Paise Zero

and supports, rubber Dunlop in seat only

and back portion covered with

polycarbon net, chrome coated five

lags base with virgin caster, pu

handles of approved shape with

hydraulic system with adjustable head

rest, adjustable lumber support,

adjustable handle etc. complete as

directed by Enginner-in-Charge.

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

6 264.00 No Providing and placing Auditorium 5252.00 Rupees Five One

Chair/seinar Chair of seat size Thousand Two Number

475X475 and back height 475 mm Hundred Fifty

from seat with pad Rest Facility using Two and Paise

pipe sructure of approved shape using

high density U foam covering good

quality of tapestry cloth on seat back

as design approved by engineer in

7 46.00 No Providing and supplying powder 8080.00 Rupees Eight One

coated/Chrome plated hydraulic Thousand Number

Revolving Synchronic High Back Eighty and

design using M.S.pipe/carbon frame

and supports, rubber Dunlop in seat

and back portion covered with

polycarbon net, chrome coated five

lags base with virgin caster, pu

handles of approved shape with

hydraulic system with adjustable head

rest, adjustable lumber support,

adjustable handles etc. complete as

directed by engineer-in-Charge.

8 30000.00 Sqcm Providing and fixing signage plates 4.86 Rupees One

made out of 2 mm thick S.S. sheet of Four and Paise Squere

S.S. 316 of specified size as per Eighty Six only Centimetr

design. Pre-treated with hair line brush e

finish: coated with two coat of

melamine polish of appropriate brand,

with figure print, raduim strip writings

which carrying specified fonts letters

of appropriate height fixed with

appropriate hardware like sash stud,

s.s. hanger, sash chain etc. and

fastners as per designs supplied by the

Architect and instructions by

Authority and Engineer in charge. The

fixing at site should be complete under

the supervision of Engineer-in-charge.

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

9 15.00 No Supplying and fixing of Stainless steel 9090.00 Rupees Nine One

seat Waiting Bench height 760mm, Thousand Number

back height 460mm, Overall length Ninety and

back, Cold rolled steel armrest and

legs with chrome finishings, &

Powder-coated cross beam in black.

under the supervision & as directed by

Engineer - in - charge.

10 91.00 Sqm Providing and fixing 40mm panelled, 3581.89 Rupees Three One

Glazed or panelled and glazed Thousand Five Squere

partitions fixed to frames with iron Hundred Eighty metre

scews etc. complete with indian teak One and Paise

wood (Frames tobe paid separately) Eighty Nine only

11 7.00 10 Providing wood work in frames of 610.23 Rupees Six Ten

Cu.dm Doors, windows cleare story Hundred Ten Cubic

windows and othersimilar works and Paise Decimal

wrought, framede and fixed in Twenty Three

position. (A) Indian Teak Wood only

12 4.00 Sqm Providing and fixing 25 mm thick 3179.95 Rupees Three One

shutters for cupboards etc. including Thousand One Squere

anodised alluminium butt hinges with Hundred metre

necessary screws. (A) Indian teak Seventy Nine

wood. (i) Fully Panelled. and Paise

Ninety Five only

13 162.00 Sqm Providing and fixing Metal Slotted 2222.00 Rupees Two One

Angle Rack Grey Colour2.2x0.75x0.3 Thousand Two Squere

one Reck, heavy metal used, Hundred metre

Assembly Required: nut bolt assembly Twenty Two

required, 20 gauge plate 16 gauge and Paise Zero

angle, Color: Grey Oil Paint under only

the supervision & as directed by

Engineer - in - charge.

14 174.00 Sqm Providing and fixing Cloth Curtian 606.00 Rupees Six One

Polyester Fabric Blend : Polyester Hundred Six Squere

*Readymade Premium Jacquard Door and Paise Zero metre

Curtain with 8 Eyelets & Stainless only

Steel Two Tone Curtain Rod under

the supervision & as directed by

Engineer - in - charge.

Rupees Fifty One Lakh Eighty Seven Thousand Four Hundred Thirty Five and Paise Total Rs.

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

Ite Quanties Estimated Item of work Estimated Rates Unit Total amount

m but may be more or In Figure In Words. according to

No. less. Rs. Ps estimated

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of

My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R.& B. Sub Division ( D P ) Road & Building Division

Palitana Bhavnagar