SITC of Fire Alarm System for TL-3, BARC, Vizag

Fire Alarm Control Panel and associated devices - EN-54 certified - Control panel shall be populated with redundant CPU, which shall take over the in case of primary CPU without manual intervention. - No of Loops per panel: 8; Each loop with redundant circuitary, which shall come in line without manual invervention. same shall be indicated. - Loop capability: 250 nos. of Multi criteria detectors or equivlant devices. - Loop Length: 6 loop cards with 1500 mtr cable length capability, 2 loop cards with capacity to drive 2500 mtr cable, using 1.5 sq.mm shielded twisted pair copper cable. - Ethernet communication: with other panels, and computer for monitoring & configuration. - Two or more network cards for redundancy. Option to connect fiber patch cable in network card shall be available. - One Relay output module having Eight or more freely programmable, bistable relays, 230 V AC, / 2A or better rating shall be included. - One Desktop computers (with latest hardware & software) with GUI, for monitoring, operation & configuration shall be provided with 55” wall mount 4K display. Desktop computer shall be capable of 24x7x365 days operation. - License with number of installed devices + 100% extra, number of Panels + 3 extra, shall be available for this computer with lifetime validity. The license shall be transferrable in case of failure of native computer. - Status indication of panel and all loop cards shall be available at front face; - Auto dialing communicator having facility for fast communication with Security/Police/Fire Services in case of emergency - Dedicated battery backup for 48 hour (normal operation) & minimum 30 min under alarm condition. - Triplicate earthing terminals for safety, shield and signal grounding - Capable to actuate a third party devices (fire dampers etc.) through monitor module - Storing the logs of alarms, times and action taken report, min 30,000 logs - In-built buzzer - Suitable for Class-A type of wiring and work on positive sequence as per NFPA-72 - Facility & equipment shall be provided for simulating the fire condition for testing purpose - Normal power supply failure shall be annunciated audio-visually - MS enclosure for the FACP with front door fitted with acrylic sheet. - Two coat of anticorrosive paint followed by two coat of synthetic enamelled - Seismic qualification

Fire alarm Repeater panel - EN-54 Certified - Active Type, shall be compatible to receive data from FACPs - Easily readable, bright display - MMI shall be the same as the main Controller - Audio & visual Alarms during fire - Display of Alarm & Fault similar to the Main Panel - User authentication - Single point failure in the cable shall not affect the performance and shall intimate the exact location of failure in all Panels - 24Hrs back up time for normal condition and minimum 30 min back-up time for fault/alarm condition,

Multi criteria detector - EN 54 certified - Intelligent, addressable, - Combination of Smoke detection and heat detection - Shall be able to identify the fires as per EN-54-29 & VDS - Thermal sensor shall be able to detect both maximum temperature Pre-defined (as per standards) and the rate of rise temperature - Inbuilt isolator, Drift compensation facility, - False alarm immunity and a superior signal to noise ratio, Automatic contamination compensation, Un-authorized detector removal detection, Adaptability with surrounding temperature fluctuations, built-in false alarm filtering provision as per EN54, - detection of both smouldering fires and open fires - EN-54-29: type of fires shall be detected - Operating conditions: 15 to +60oC, 10% to 95% RH (non- condensing)

Sounder base smoke detector - Multi-criteria Detector with Sounder with Base; EN-54 certified - Specifications for Multi detector are mentioned above, - Sounder Volume (DIN tone) – (max) 92 dB or more, configurable SPL - Operating conditions: 15 to +60°C, 10% to 95% RH (non- condensing)

Manual call points - EN 54 certified - Double action, re-usable, addressable, Loop powered - Shock and vibration resistant, polarity insensitive - LED status indication, in-built isolator, - Operating conditions: 15 to +50°C, 10% to 95% RH (non- condensing)

Response Indicator - EN-54 certified - shall start flashing when the detector in that particular' area / zone has been activated - LED status indicator - Loop powered

Duct Detector & indicator - EN 54 - Shall detect smoke in ventilation ducts - Air from the ventilation duct is constantly directed through the sample tube and the air sampling housing to the smoke detector - It shall have separate indication for smoke detection and detector trouble alarm due to accumulation of dust etc - Air velocity: 1.5 to 20 m/s - Protection class: IP 54 - Loop powered, in-built isolator - Detector along with suitable housing shall be suplied - in-built or additional Relay contact with 60 W rating - Operating conditions: 15 to +50°C, 10% to 95% RH (non- condensing)

Sounder / Hooter along with Strobe/ Flasher - Addressable, loop powered sounder along with strobe - EN 54 certified - In-built isolator - SPL should be minimum 96 dB or more, adjustable SPL - Option of different tones for alarm detection in different floors - should draw minimum power from loop, at least 20 loop powered sounders in the same loop, - Sounder shall be combined with a Flasher - strobe shall be wall/celling mounted with 360 deg. Viewing angle

Fire Fighter Telephone console - This system allows firefighters and others to communicate with one another during emergency situations. - Standalone unit containing the systems master handset & power supply - Connectivity for 5 or more zones, with status indication of each zone - Full duplex audio, Conference call facility - In-built or add -on Power back-up of at least 120 V*A*hr. shall be provided with protectio to Deep discharge, short, high temperature, - Suitable charging & monitoring system for emergency - Complying to BS 5839-9 (emergency voice communication systems) or equivalent standard. - Supports 500 mtr or more cable length per zone - Monitored handsets, indicate the location of the call and provide an audio visual indication to alert the operator’s attention. - Master telephone handset with a push to talk button and a Flexible-coiled five (5) foot cord - minimum size of the wire shall be not less than 0.8 sq.mm for electronic-circuits and 1.5sq.mm for electrical circuits & 14AWG for grounding - Stainless Steel Flush Mount enclosure. - 230 V AC mains power supply.

Fireman's Telephone handset Telephone handset shall have 6.5 / 4.5 mm male jack mm jack for inserting in fireman telephone jack at various field locations. - The telphone handset shall be rugged & reliable.