RequiredOEM Authorization Certificate Bid to RA enabled No Chairs-office ( 10 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest No * Chair Type With Arms With Arms
RequiredWithout Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane
RequiredPadded with Polyurethane Foam
Requiredmoulded plywood
Requiredinjection moulded Polypropylene
RequiredSeat 1/9 made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene
RequiredSupported by two MS chrome plate strip (30 mm X 10 mm)
RequiredBy Back patti as supporting bracket Frame Type Cantilever Cantilever
Required4 Legs Castors Without With
RequiredWithout MATERIAL Type of material (other then wood) used in Polythene cane Chair hot pressed board solid wood
Requiredteak wood
Requiredhot pressed board
Requiredplastic net
RequiredNOT APPLICABLE
RequiredPolypropylene Copolymer (PPCP) - Moulded single piece
RequiredTeak wood section (45 mm X 22 mm) Material of Fabric Back Cover leatherite knitted with cane
Requiredleather foam
Requiredplastic net
Requiredleather
Requiredleatherite
Requiredpolyster
RequiredN.A Thickness of Plywood used in Backrest IN MM (±1 mm) 15 mm 12 mm
Required15 mm
Required18 mm
Required20 mm
Required25 mm
Required30 mm
Required35 mm
Required40 mm
RequiredN.A
RequiredNO PLYWOOD
RequiredBACKREST WITH Polyester mesh with fibreglass plastic frame Frame Material STAINLESS STEEL * Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 45 Kg/Cub.M * Material of Fabric of Seat Cover black leatherite black leatherite
Requiredleather foam
Requiredplastic net
Requiredknitted with cane
Requiredfabric
Requiredpolyurathane
RequiredN.A
RequiredLeatherette Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 45 Kg/Cub.M * Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm
Required18 mm
Required20 mm
Required25 mm
Required30 mm
Required35 mm
Required40 mm
RequiredN.A 2/9 GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 290 Gram per Sq Meter 80 Gram per Sq Meter
Required220 Gram per Sq Meter
Required250 Gram per Sq Meter
Required290 Gram per Sq Meter
RequiredN.A Arm Material polypropelene * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm
Required50 mm
Required62 mm
Required65 mm
Required70 mm
RequiredN.A
Required40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm * Shoe Type nylon rubber * DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe
Required16 SWG 30 mm round pipe
Required2 mm thick 25 mm tube
Required40 mm teak wood
Required16 gauge tubular pipe
RequiredN.A
Requiredarmrest supports dia. 25 mm X 1.6 mm thick and frame of dia. 25 mm X 2 mm thick Chair Height ±15(mm) 950 mm * Seat Depth ±10(mm) 500 mm * Seat Width ±10 (mm) 500 mm * Seat Height IN MM ±5(mm) 430 400
Required430
Required460
Required480
Required500
Required380
Required450
Required254 Backrest Width ±10(mm) 500 mm 350 mm
Required380 mm
Required400 mm
Required430 mm
Required450 mm
Required500 mm
Required550 mm
Required480 mm
Required520 mm
Required280 mm Backrest Height ±10(mm) 550 mm * Arm Length ±5(mm) 250 mm 200 mm
Required250 mm
Required300 mm
Required350 mm
Required400 mm
Required450 mm
RequiredN.A
Required470 mm
Required490 mm Arm Width ±2(mm) 50 mm 25 mm
Required30 mm
Required40 mm
Required50 mm
Required60 mm
Required70 mm
Required75 mm
RequiredN.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black * Paint Type chrome chrome
Requiredepoxy polyster
Requiredpolished
Required3/9 synthetic enamel
Requiredpowder coated on MS
RequiredN.A
RequiredBlack coated with dry film thickness of 40 to 60 microns Colour of Paint NA * CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NO * Test reports to be furnished to buyer on demand YES YES
RequiredNO BIFMA certification YES YES
RequiredNO OEM of offered product is ISO 9001:2015 certified YES YES
RequiredNO OEM of offered product is ISO 14001:2015 certified YES YES
RequiredNO OEM of offered product is ISO 18001:2007 certified NO YES
RequiredNO WARRANTY Warranty period in number of years 1 1
Required2
Required3
Required4
Required5 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
