Replacement work of wire rope with rope socket, turn buckle assembly in 5 nos gate , Replacement of L H side arm assly- 1 no with H T bolts , Replacement of rubber seal in all gates, Providing and fitting of dial indicator in all gate for repairing work of radial gate size 41x 27 of Ozat-2 Irri. project.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Name of work:-Replacement work of wire rope with rope socket, turn buckle assembly in 5 nos gate , Replacement of L H side arm assly- 1 no with H T bolts

Replacement of rubber seal in all gates, Providing & fitting of dial indicator in all gate for repairing work of radial gate size 41'x 27' of Ozat-2 Irri. project.

Description Qty Unit Rate (₹) Amount (₹)

Manufacturing, supplying & erecting of cast steel turn buckle -2 no's pair / set with bronze bushing in eye bolt of turn

buckle, wire rope socket- 4 no's with S S 410 Quality socket pin-4 no's & yoke pin- 2 no's with hot dip galvanizing to turn

buckles and providing & fitting of 32 mm dia. wire rope Fiber core type galvanized wire rope 6 x 36 / 37 construction, rope

clamp, H T bolts etc. & fixing of one end of wire rope in new rope socket by filling of zinc metal & other end of fixing on

rope drum by clamp & H T bolts with applying cardium compound to wire rope & alignment of whole gate etc. complete

1 including cost of material, erection, labour, machining, hot deep galvanizing, transportation and recovery of dismantled m s 5 Gate 133527

scrap material like old cast steel turn buckle with m s yoke pins- 2 set,32 dia. Galv. wire rope fitted socket with pin- 4 no's,

rope clamp & H T bolts etc. coming from this work will be given to agency etc. complete as per drawing & specification for

41'x27' Radial gate of Ozat-2 Irri Project (2 pair/set /gate)(only Gate no:1,4,10,20,24 )

Replacement of dial indicator system in ERU at 2nd shaft by new one with dismantling of unserviceable dial indicator system

in CDU of gate & providing & fitting of new dial indicator system with cover in ERU at 2nd shaft spur gear, chain, sprocket

with dial painting, marking for gate opening etc. complete as per specification & Providing & erecting & setting of roller

2 type limit switches with contact 415 V having aluminium housing with IP55 protection etc including cost of material, labour 25 Gate 32764

etc as per Instruction of Engineer In charge for redial gate 41' X27'-25 No's of ozat-2 Irri. project.dismentled scrap coming

from this work will be given to agency.

Providing & fitting of new 'Z' type rubber seal of size 130 x 76 x 19 mm for both side and flat type rubber seal of size 115 x

19 mm for bottom with new S.S bolt nut washer etc. by dismantling exisitng both sides & bottom rubber seals with seal

3 clamping flats, s s bolt-nuts etc. including cost of material, labour, gas cutting ,welding, tools ,tackles ,scaffolding etc..as per 25 Gate 108821

drawing and specification of Radial gate size - 41' X27'-25 No's of Ozat-2 Irri. Project.Dismantled scrap materials coming

from this work will be given to contractor.

Dismantling of existing bend & damaged L H side Arm with trunion assly with studs, H T bolt nuts etc in gate sr. no-12.

Removing of trunion assly from old arm by gas cutting. Fabrication, supplying & erecting of L H side Arm with additional

strengthening done as per drawing of E Q D C, Gandhinagar & joining the existing old trunion assly to new arm with

providing spice plate on arm- trunion joint by using M S welding rod E-7016 x-ray quality. Providing & fitting of 54-50 dia. x

4 300 mm M S studs & 32 mm Dia. H T bolt with double Nut & washers for fitting of arm assly in radial gate sr. no-12 etc 1 289052

complete as per drawing, direction & instruction of engineer In charge & specification including cost of material, labour,

fabrication, erection, gas for cutting ,tools, tackles, scaffolding ,painting, transportation and dismantled scrap materials

coming from this work will be given to contractor for radial Gate Sr.no 12 (Total-1 arm) of Ozat-2 Irri. Project

Fabrication, supplying & erection of M S plates 200 kg, M S angles 200 kg & M S channel 200 kg etc of required size & length

for misc. repairing work during tender work Including cost of material, gas for cutting ,labour, tools & tackles, scaffolding,

safety equipment, transportation and painting etc complete as per direction of Engineer in charge & specification for 41' x

27' size Radial gate of Ozat-2 Irri. Project.

(In words :- Forty Five lakh Fifty Eight thousand Two hundred Fifty One only)

( Signature of Contractor ) Executive Engineer

Irri. Mech. Dn No-7