Loading…
Loading…
Tender Value
₹8.4 L
EMD Value
₹21,000
Closing Date
10 Sept 2026, 3:00 pm
Divisional Engineer-(Elec-I), Tirupati
elc1div
AME for preparation of various ornamental designs for use during Srivari Brahmostavams in Alipiri Section Tirupati for the year 2026-27
980821
150/DE(Elec.)-I/TTD/TPT/2026-27
OPEN - NCB
Electrical Works
TIRUPATHI
7 documents required · 7 mandatory
₹298
₹21,000
26 Aug 2026
26 Aug 2026
26 Aug 2026
Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST
Fabrication charges for providing necessary back support with 8mm / 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST
Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST
Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. The rate including the cost of Red Oxide and Enamel paint 2. The above rate excluding GST
Supply of Semi-skilled workman (Second class) Electrician / Welder / Bar bender for use in Bramosthavam miscellinious works.
Supply of Red oxide paint
Supply of Enamel paint
Supply of 6 mm / 8mm M.S.Steel
Supply of 4/5mm LED pixel serial sets consisting of 50 to 60 Nos of lamps with 6" span bulb (Copper wires ) and operated at 220V. 50Hz, AC supply. Colours: Green, Red, Blue, Yellow and white.
Supply of Welding Elecrodes 4mm dia
Supply of 7/20 standard G.I wire
Aluminum winding wire
Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable. Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab /Gloster/ Goldmedal/GM/ Fortune Arrt/ Anchor/Million/ APAR(Anushakthi) / Sudhakar / Orbit/Batra Henlay/Salzer.
Supply of Hook-up wire
Supply of PVC TT Wire
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NITNO 150 Book.doc
TENDER_DOCUMENT • 1.92 MB
BOQ 150.xlsx
TENDER_DOCUMENT • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].