Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | ₹31.2 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹34.2 L+₹3.0 L (9.72%)Rejected-AOC | ₹34.2 L+₹3.0 L (9.72%) | L2 | Rejected-AOC Rejected |
Tender Value
₹32.3 L
EMD Value
₹64,600
Closing Date
7 Nov 2023, 6:00 pmClosed
CWE Mamun
HQ CWE MAMUN PIN- 145001
SPECIAL REPAIR TO PAVEMENT OF HELIPAD AREA UNDER GE SAMBA AT MIL STN SAMBA
2023_MES_616721_2
CWE/M-27/2023-24
Open Tender
Civil Works - Roads
Item Rate
120 days
GE SAMBA
Class D Category a v
7 documents required · 7 mandatory
₹500
₹64,600
Yes
23 Dec 2023
14 Oct 2023
14 Nov 2023
14 Oct 2023
7 Nov 2023
24 Oct 2023
Amount
Scarifying or picking up gravelled macadam or bituminous macadam surfaces area exc. 400 Sqm and depth not exc. 50mm, complete all as specified.
Material and Labour for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen (VG-30) @ 4% by total mix laid by self propelled mechanical paver, rolled and compacted to required gradient and camber using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface complete all as specified and directed. Note: The specification of bituminous macadam shall be as per Para 20.B.3 of SSR Part-I.
Material and Labour for Preparation of existing black top surface of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt etc, complete all as specified.
Material and Labour for applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 5 Kg per 10Sqm of road surface, complete all as specified.
Material and Labour for laying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) using binder (Bitumen VG-30 grade) contents @ 5.5 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface complete all as specified and directed. Note: The combined grading of aggregate shall be as per Para 20.B.2.5.4(d) & 20.B.4 of SSR Part-I.
Material and Labour for thermoplastic road marking paint 2.5mm thick, white or golden yellow in colour, conforming to BS-3262, in lines, arrow, dashes & letters exceeding 10cm in width, applied hot, using application unit and retroreflective glass beads @ 250 to 300 gram/Sqm to withstand vehicular traffic load, laid as per manufacture's instructions, the finish surfaces to be level, uniform and free from streaks and holes as per MORTH specification complete all as specified and directed.
SIDDAHANT ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .