COMPREHENSIVE BR WORKS MAINTENANCE REPLACEMENT OF UNSERVICEABLE WATER TANK CLEANING OF WATER TANKS ETC AT OFFICERS RESIDENTIAL AREA UNDER AGE BR I MAINT AT INA EZHIMALA

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in patches 300x200x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 350x250x7mm/450x350x7 mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for coloured glazed ceramic heavy duty tiles 300x300x8 to 10 mm thick, exterior quality, of approved pattern / design as in floor, skirting, steps, risers etc. set and jointed in neat cement slurry and pointed with coloured cement to match to colour of tiles over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors, kitchen platform, steps and other similar situations over and including 15mm thick backing coat in CM 1:4 laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.

Rounding to edges of stone slabs to one edge, such as in kitchen platform, steps and other similar situations complete all as specified and as directed.

Cutting of granite stone for fixing kitchen sink complete all as specified and as directed.

S&F Matt finish stainless steel kitchen sink bowl type of size 600 mm x 450 mm x 250 mm complete all as specified and as directed.

Demolition of cement concreate in ground floors and pavings n,exe 15cm thikness (bellow or above ground level) complete all as specified and as directed.

M&L for pre-polished cement concrete chequerred tiles of size 250 x 250 x 25mm thick square in shpae of approved tint, laid over 20mm thick screed bed in CM 1:4, set jointed and pointed with grey cement pigment to match the colour of tiles complete all as specified and as directed.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brickwork or Pre-cast cement concrete block masonry, built in cement mortar complete all as specified and as directed.

M&L for Plain Cement concrete Type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (using 20 mm aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC Type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in copings complete all as specified and as directed

Dismantling plain or corrugated steel sheeting, any thickness, including nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 2mm thick polycarbonate solid sheet of ISI Mark, cristal type, including jointing strip suitable for fixing sheet, silicon sealant, washer, screw etc complete all as per manufacturers instruction and as specified & directed by Engr-in-Charge.

Dismantling of structural steel work including doors etc complete all as specified and as directed.

S&F mild steel work as in roof trusses (framed), trussed, purlins, rafters, post etc.(Beam, tee, angle channel or flat sections) of FE-290 (Gde-E165) including distance pieces, cleats and necessary welding etc. complete as specified and as directed.

S&F mild steel frame work such as in grills, gratings etc. with ends of bar shouldered and /or riveted or forged into spikes, framed guard bars, ladders, framed brackets, etc and similar work conforming to Fe-290 of Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and painting with two coats of aluminium paint over a coat of aluminium red oxide primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down chowkats or frames not exc.1.5 Sqm each but without taking off shutters from the frames complete all as specified and as directed.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the frames complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters fixed or sliding type without sash bar, aluminium section weighing 0.55 kg/m incl necessary joining cleats rubber packing anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.

Taking down shutter of any description exc.1 Sqm and not. exc 2 Sqm each complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC, 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per site requirement and as per specification & drawing.

M&L for second class soft wood, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with deco rative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F 100 mm anodised aluminium handles cast type complete all as specified and as directed.

S&F 125 mm aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F 125 mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F 150 mm anodised aluminium handles cast type complete all as specified and as directed.

S&F 150 mm aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F floor door stopper 150 mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed.

S&F in repairs 100 mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repairs 125 mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repair mild steel friction hinges suitable for window/ ventilator shutters complete all as specified and as directed.

S&F in repairs 100 mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed in repair type B11 complete all as specified and as directed.

S&F in repairs 150 mm anodised aluminium handles cast type complete all as specified and as directed.

S&F in repair 75 mm brass handles, cast type, polished, ornamental type for drawers, etc. complete all as specified and as directed.

S&F in repairs 150 mm brass handles, cast type, polished, ornamental type for cupboards complete all as specified and as directed.

S&F in repair aluminium powder coated Ebco handles for sliding windows complete fixed all as per manufacturers instruction and as directed by Engr-in-Charge.

S&F in repair 150 mm aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F in repair floor door stopper 150 mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed.

S&F in repair 75 mm hasp and staple mild steel safety type and fixed with screws complete all as specified and as directed.

S&F in repair aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.

S&F in repairs rubber beading suitable size for safety purpose (snake guard) in bottom of door complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

S&F in repair block board, grade 2 quality, interior grade , decorative type, both faces, 18/19mm thick as in cupboard, drawer repair & fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair medium density fibre board exterior grade 18/19 mm thick as in cupboard, drawer repair & fixed with screws to timber frame work complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F in repair mild steel drawer slider complete fixed all as per manufacturers instructions and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F sheet glass 4mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4mm thick sheet figured glass pin headed quality exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs complete all as specified and as directed.

Taking down existing aluminium glazed window shutters of any description for repairing and refixing in the same opening after carrying out repair works complete all as specified and as directed. Note :- New materials required for replacement of old items shall be measured and paid seperately vide relevant items.

S&F in repair mortice lock brass body, 100mm, 4 levers vertical type complete all as specified and as directed.

S&F in repair 20 mm bore curtain rods, anodised aluminium alloy, PVC coated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repair aluminum (die cast) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (EWC) coloured with PVC seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F in repair plastic water closet seat cover coloured closed pattern with flat bottom and cover and MSCP or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china wash basin, coloured, flat back 550x400mm including waste coupling CP, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed.

S&F in repair 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipes complete all as specified and as directed.

S&F in repair 15mm dia bore pillar taps, cast copper alloy, fancy type capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15mm bore stop valves chromium plated cast copper alloy, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated toilet paper holder complete all as specified and as directed.

S&F in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.

S&F in repair PVC flexible waste pipe 32/40mm dia and length of 600mm (min) for urinals/WHB/sink complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated towel ring complete all as specified and as directed.

S&F in repair cast copper alloy, brass chromium plated towel rail, 600mm long complete all as specified and as directed.

S&F in repair 125mm size brass chromium plated shower rose complete all as specified and as directed.

S&F in repair waste coupling, brass, chromium plated with long shank, half thread, 32mm dia for WHB/urinal etc. complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F for flora centre hole basin mixture including CP extension nipple as required complete all as specified and as directed. Make:- Hindware model F280009CP or equivalent in Parryware/CERA.

S&F 15 mm bore sink cock swan neck (wall mount installation) type with chrome finish complete all as specified and as directed. Make:- Hindware model F280026CP or equivalent in Parryware/CERA.

S&F Bathroom plastic cabinet of size 0.45 x 0.55 x 0.12 mtr with mirror complete all as specified and as directed by Engr-in-charge. Make:- Nilkamal/Cello.

S&F multi purpose glass corner shelf of size 300 x 300 mm, clear in color with stainles steel wall brackets and two grill bars, approved quality complete all as specified & as directed.

S&F wall mounted kitchen utensil dish rack, made of stainless steel, weight not less than 5 Kg, size 0.90m x 1.00m (Approx) of approved design and make complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connectors 25-32mm bore in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed.

S&F in repair 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including removal of existing pipe complete all as specified and as directed.

S&F in repair 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including removal of existing pipe complete all as specified and as directed.

Removal of air lock in internal water supply system of pipe of any dia complete all as specified and as directed.

Cleaning of water tank exc 250 & n.exc 500 lit, including cleaning all scales and dirts from inside of tank using bleaching powder and washed with water, complete all as specified including taking down and re-fixing of float valve, mentioning date of cleaning on water tank using white synthetic enamel paint as existing complete all as specified and as directed. Note:- After cleaning of water tank, the rep of contractor shall check during water supply time and ensure water is reaching to the qtr and float valve is working properly and no leakage at joints.

All as per item No. 98 but exc 500 & not.exc 1000 lit complete all as specified and as directed.

S&F in repairs PVC Lid/ cover for 500 lit to 1000 lit Capacity water tank complete all as specified and as directed.

S&F in repair rotational moulded PVC water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including taking down old broken/cracked water tank and reconnecting the water pipe line in position complete all as specified and as directed.

All as per item No 101 above but 750 Ltr capacity complete all as specified and as directed.

All as per item No 101 above but 1000 Ltr capacity complete all as specified and as directed.

Dismantling single layer of mangolare pattern tiles in roofing complete all as specified and as directed.

M&L for roof tiles mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

All as per item No. 105 above but except tiles complete all as specified and as directed.

M&L for ridge or hip tiles to suit manglore pattern or roofing tiles bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of new mangolare pattern roof tile surface by cleaning the tiles and applying two coats of antifungal paint using Apex tile guard deluxe multi surface paint etc., complete all as per manufacturers instruction.

Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605mm.The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

M&L for 4mm thick non-asbestos fiber cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.

S&F 3mm thick acrylic solid sheet of ISI mark, plain & transparent type, fixed to steel, aluminium or wooden frame work including silicon sealant, washer, screw, beading and necessary scaffolding complete all as specified and as directed by Engr-in-charge.

GMS Builders