general

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Engaging of Man Mazdoor including all charges etc..complete.

Engaging of Fitter Cl-1 including all charges etc..complete.

One Job Work For Blade Cutting Charges For 350 mm dia DI pipe

Supply,Delivery and Fixing of 350mm Dia D.I of Mechanical Joints Including Cost of Bolts and Nuts Rubber gaskets Etc.,Complete.Rate For Lowest Quatation).

Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper.

One Job Work For 350 mm dia MS Pipe Welding charges including all materials and all labour charges etc complete For arresting Leaks

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete. (1/2 " to 1 ")

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm / 6 mm thick).

SUPPLY AND DELIVERY OF PIG LEAD 99.99 % PURE INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES.

SUPPLY AND DELIVERY OF SPUN YARN OF BEST QUALITY INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES.

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin , Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel including transportation but excluding Taxes. (P.H Items, P.82)

250mm Dia Non Return Valve

200mm Dia Non Return Valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

100mm Dia Non Return Valve

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.749 %

Unforeseen item