15th Finanace

Name of the work:- Construction of Village Health Clinic Building at Usulumarru village of Peravali Mandal, Est.Rs. 36.00Lakhs, 15th FC Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

"Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Earth filling (Ordinary Soil)"

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403),. for Footings

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403),, for Pedastals

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403), for columns

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403), for Plinth Beams

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd Class for basement including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete

Brick Masonry in CM (1:8) with Bricks traditional size 23 x 11 x 7 cms 2nd Class for superstructure including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete For Superstructure

Reinforcement birck masonary walls of 11.5cm in CM (1:6) using 2nd bricks having a crushing strength of not less than 35.00Kg/cm2 and using two mild steel bargs of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and conveyance of all materials and water from approved sources to work site and all operationsl, incidental labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing including Overheads & Cotractors Profit @13.615/100etc., complete for finished item of work as per SS 509

Providing High Yield Strength Deformed (HYSD/Thermo Mechanically Treated (TMT)/Mild Steel (MS) steel bars (Fe 500 graded as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403), Lintels over Doors and Windows

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403),) for Sunshades of 0.075m thick at support and 0.05m thick at free end

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403),) for Roof Beams

Reinforced Cement Concrete M25 Grade Design Mix Concrete corresponding to IS 456 using with 20mm size HBG- graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403),) for Roof SLAB 125 mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 12mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, including conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Ornamental Plastering with CM (1:4) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete for ceilings

Plastering with CM (1:5) 12mm thick in single coat including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc.excluding seigniorage charges as directed by Engineer-in-charge, complete for finished item of work etc., complete for superstructure

Supply and fixing Jallies (Cement Concrete) of 50mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., complete for finished item of work in all floors.

Cost and supply of MS Grills with MS flats and squares including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707)

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.(APSS No.701 &707)

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., complete for finished item of work. (APSS No.701 & 707)

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.

Painting to new walls with 2 coats of plastic acrylic emulsion paint of approved brand over 1 coat of cement primer interior grade - I and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS-911 for Internal walls

Painting to new walls with 2 coats of plastic Acrylic emulsion paint of approved brand over primer coat with cement primer grade - I and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS-911 for External walls

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.

Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (SS No. 1201, 1212 & 1207)

Supply and fixing of Medium Teak wood fully panelle door of size 1.20x2.10 mts with Teak wood frame of section 100 mm x 75 mm including cost and conveyance of all materials and labour charges including fixing the all fixtures to door 6 Nos of MS. Butt hings 125 mm long, 2 Nos of MS, tower bolts 150 mm long, 1 Nos of MS Handles 150 mm long, 2 No of 300 mm long Aldrop and 0 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200 mm x 2100mm) etc complete

Supply and fixing doors with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters/Powder coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with Commercial ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of Sal wood frame, flush shutter including fixing the all fixtures to door 3 Nos of MS. Butt hings 125 mm long, 2 Nos of MS, tower bolts 175 mm long, 1 Nos of MS Handles 125 mm long, 2 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900 mm x 2100mm)

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Fixed Window / Ventilator made of (small series) frame 47x 50 mm & Multion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Fixed Window / Ventilator made of (small series) frame 47x 50 mm & Multion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Supply and fixing of 20mm outer dia 2.00 mm thick Heavy grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete. Makes : Sudhakar

Supply and Fixing of 25mm outer dia Medium grade ( 2.00 mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI MARK) concealed in wall with all required MS Deep Boxes and all accessories including masonary work for light, fan and separate plug point with MS modular switch box including all labour charges etc., complete. for EPABX, LAN, and CCTV, Run of mains, light, fan points. Makes : Sudhakar

Wiring with 2 runs of 22/0.3mm (1.00 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Modular cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Goldmedal Make of MODULAR SWITCHES AND ACCESSORIES - Category II (ELEC-1.8.2) : Goldmedal (Curve/Air) Make of CEILING ROSE 3 plate - Gold Medal Olive Make of MODULAR COVER FRAMES - Category II (ELEC-1.8.4) : Goldmedal (Curve/Air)

Supply and run of 1 of 14 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for Earth continuity including all labour charges etc., complete. Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Goldmedal

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe For Mains inlcuding all labour charges etc., complete. Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Goldmedal

Supply and run of 2 of 56/0.3mm (4 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe For Mains inlcuding all labour charges etc., complete. Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Finolex /Polycab

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Make of Modular Switches - Category II (ELEC-1.8.2): Goldmedal (Curve/Air)

Supply and Fixing of 16A or 20A, Modular socket with 16A or 20 A switch control modular type with front cover plate including all labour charges etc., complete. Make of Modular Switches - Category II (ELEC-1.8.2):Goldmedal (Curve/Air)

Supply and fixing of 6A Modular socket with switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Make of Modular Switches - Category II (ELEC-1.8.2): Goldmedal (Curve/Air)

Supply and fixing of 18-20 W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with Earth Connection and not Less than Two Years warranty. LED BATTEN LIGHT MAKE - CATEGORY- I (ELEC-3.8.13) : GoldMedal

Supply and fixing of Batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7 W LED bulb (for new installation). Makes of PVC batten holder : GM G Home / Gold Medal Olive / Million Zoom /Vimal opel/ Anchor/Vihan/ Havells Reo Makes of Bulb : Phillips /Crompton / Bajaj / Havells / GM/HPLSyska / GoldMedal.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes( ELEC-5.1.3 ) : Crompton HS Plus

Supply and Fixing of 2 Module Modular type Electronic step type Fan Regulator. CATEGORY- II Make of Fan Regulator : Goldmedal (Curve/Air)

Supply and fixing of 12 way SPN Distribution board with IP-30 protection suitable for single phase 1 No of 40 A Double Pole (DP) Isolator as incomer and 8 nos of 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete. 12 way SPN DB makes of ( ELEC-2.13.2 CATEGORY- II) : 40A DP Isolator makes of (ELEC-2.11.2 CATEGORY- I ) : 10 KA 6-32 A SP MCB makes of (ELEC-2.10.2 CATEGORY- II ) : Gold Medal

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing of OD pipe CPVC Pipes and Fittings SDR 13.5 Class-2 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work at all floor levels. Makes : Ashirvad/ Ajay/ Astral Flowguard or equivalent ISI Mark 22.20mm OD pipe

Supply and fixing of OD pipe CPVC Pipes and Fittings SDR 13.5 Class-2 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work at all floor levels. Makes : Ashirvad/ Ajay/ Astral Flowguard or equivalent ISI Mark 28.60mm OD pipe

Supplying and fixing of SWR PVC pipes (Sudhakar- ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) Makes Of : Sudhakar 110mm dia PVC/ SWR Pipe- 4 Kg/sqcm

Cost and supply of 75 mm dia PVC/ SWR Pipe- 4 Kg/sqcm including cost and conveyance of all materilas and labour charges etc., complete.

Providing and placing on Terrace Polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangements & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'S'trap

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers asper IS 2548-1996

Supply & fixing of PVC low level system with internal components & short bend:10 Litres capacity Single Flush

Supply & fixing of 12.70mm dia PVC connection with union nuts

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock

supplying&fixing stainless steel sink size 20''*18*8''(508*457.2*203.2mm)1 mm thick with accessories

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of of Jaquar make queen series Chrome plated with 7 years warranty including cost and conveyance of all materials, labour charges for finished item of work.

Supply & Fixing of 12.70mm NP push cock first quality Indian Make heavy duty including cost and conveyance of all materials, labour charges for finished item of work.

Construction of Septic Well of Dia 900 mm by Lowering 900 mm Dia RCC Well Rings of 10 Nos to Suitable Position Including Cover Slab of RCC 50 mm Thick Including all Labour Charges for Earth Work Excavation , Lowering theRCC Well Rings and Putting Cement Motor for Joints Including Cost and Conveyance of all Materials and Labour Charges etc., Complete (Observed Data)