PROVN OF LOADING POINTS AT SHED NO 1 TO 10, 11 TO 20 UNDER GE SAMBA

Amount

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep & getting out in any type of soil complete all as specified and directed

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc, nexc 10 Sqm on plan and n.exc 1.5m depth, in soft/ loose soil and getting out, complete all as specified and directed.

M&L for plain Cement concrete 1:3:6 type C2 using 40 mm graded stone aggregates in foundations, filling and mass concrete complete all as specified and directed.

M&L for Plain Cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) as in Surface channels & drains , complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix ) using 20mm graded crushed stone aggregate as in Fondation includings rafts, footings ,foundation beams, plinth beams and mass concrete etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately)

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix ) using 20mm graded crushed stone aggregate as in walls ,retaining walls, basements walls, ballast walls and the like any thickness above top of footings includings attached pilasters and buttresses etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately)

S&F for GI water tubing 50mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) fixed to wall or ceiling or laid in floor complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and directed.

M&L TMT bars (Fe 500), 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

All as per item No 12 here in before but of 8mm & over upto and including 12mm dia as in stirrups, spacers, blinders

M & L 75mm for Cement concret PCC 1:4:8 type D2 (using 40mm graded stone aggregate ) as in Sub Base for hardstanding etc complete all as specified and directed.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick/25cm x 25cm x 25mm thick, set, jointed with cement and pigments and pointed in neat cement slurry as in path etc including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 150mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in Sub Base for hardstanding /Paths etc complete all as specified and directed

M&L for 50mm thick sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L for 80mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-40 grade complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in pre-cast factory made kerb stonecomplete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n.exc 30cm thick, watering ramming/rolling and finishing to required size, shape, etc n.exc 1.5m from base complete all as specified and directed. (Note :- Earth obtained from excavation and removed vide relevant item shall be used for this work, if found suitable by Engr-in-Charge)

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed.

Removing excavation soil to a distance n exc. 50m & depositing where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed.

S&F of cats eye of width not exc 120mm and height not exc 20mm made up of strong engineering polymer thermoplastic polyurethane with electronic welded abrasion resistant lenses for retro reflection in dry & wet weather condition alongwith bituminous adhesive as per MORTH specification as approved complete all as specified and directed. Make : Avery Dennison/Greenlite /3M.

s k construction co