Annual Maintenance on various link roads in Sub division Ghumarwin in Section-II SH Repair of Pot holes road Under MMSRRY.

Providing and laying bituminous macadam for correction layer and pot hole with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all lead laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification MORD 2014 Clause 504 with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes (seventy five tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder @ minimum 3.3 (three Point Three) per cent VG-30 (Viscosity grade thirty) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per IRC-29-1988 complete in all respects as per direction of Engineer-In-Charge including carriage of material with in all leads and lifts and other incidentals. The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other construction worker, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg (Zero point two five to zero point three zero kilogram) per Square metre as per table 500.2 of MORD technical specification 2014, on the prepared bitumenious surface cleaned with hydraulic broom as per technical specification clause 503. of MORD technical specification 2014, as per direction of Engineer-In-Charge with in all leads and lifts and other incidentals. The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other constrcution worker, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Providing, laying and rolling of close-graded premix surfacing material of 20 mm (twenty millimetre) thickness composed of 11.2 mm to 0.9 mm (eleven point two millimetre to zero point nine millimetre) (Type-A) or 13.2 mm to 0.9 mm (thirteen point two millimetre to zero point nine millimetre) aggregates using VG-30 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other constrcution worker, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Please Enable Macros to View BoQ information