DAY TO DAY MAINT INCLUDING CERTAIN OTHER MISC WORKS AT MD, OTM, MES AREA AT WEST SIDE OF LHEL MARG UNDER GE (S) BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified

All as item No 1 here-in before but n.exc 1.5 Sqm each complete all as specified

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and removal from site complete all as specified

Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each and removal from site complete all as specified

Re-securing or Easing and adjusting without taking down of shutter of any description exc 1 sqm but not exc 2.0 sqm complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified

Demolition of precast concrete block/brick walling built in cement mortar of any description etc complete all as specified.

Demolition of cement concrete of any position and description and removal from site complete all as specified

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs and removal from site complete all as specified

M& L Vitrified tiles (double charged) 9-10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as all as specified.

All as per item no 12 but as in skirting 10 cm height complete all as specified

All as item No 14 here-in before but on vertical surfaces cut to required size and shape laid over 10mm thick rendering in CM (1:4) complete.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed.

M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed.

M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complete all as specified

All as per item No 18 but in narrow width of vertical surfaces.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and including use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete .

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified

M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg) in foundations,filling and mass concrete complete all as specifide as directed by.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified

S&Fof 3mm thick float glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin.

All as per item No.25 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats.

S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existing opening and making to match as per existing surfaces.

S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .

Restraining and rescuring of aluminium section of shutter and frame, including proper adjustment of floor spring and fixing of new rubber gasket etc of existing door for proper functioning of each shutter n exc 2 sqm complete all as specified and as directed.

Repair for wooden doors shutters and windows for proper closing/ opening including necessary cutting, filling, painting with synthetic enamel paint to match existing finishes complete all as specified and as directed.

M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail iof section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all neceassary fittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified and as directed by .

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only).

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.

Supply only liquid water proofing compound.

M& l for two coat of acrylic distember on new wall surface including preperation of the surface all as directed and specified.

M&L for applying 1.0 mm thick (average thickness) wall care putty on new or old wall surface all as specified

M&L applying two coats of weather proof exterior acrylic emulsion paint over a coat of white primer including preparation of new /old wall surfaces complete all as per manufacturer's specified

Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified for Bore of tubing 15mm

As per Item No 50 above but for Bore tubing 20mm

M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for Bore of tubing 15mm

As per Item No 52 above but for Bore tubing 20mm

Refixing of reusable GI pipes of 15mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

Refixing of reusable GI pipes of 20mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 500 lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required , cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified

Disconnecting existing tanks of capacity exc 500 Ltrs and n. exc 1000 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified

S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.

M&L for 150 mm size aluminium anodised cast type handles.

M&L in repair 150 mm size aluminium anodised cast type handles.

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section.

S&F in repair 100mm size mild steel butt hinges medium weight.

S&F 100mm size mild steel butt hinges medium weight.

S&F in repair 75mm size stainless steel butt hinges with mild steel hinge pin.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC Make: Prayag model Gracia No 701 or equivalent as in the list of makes.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified Make: Prayag model No 4054 or equivalent as in the list of makes.

S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs. Make: Prayag model GLECY No 4022 for pan and 518 for seat cover or equivalent as in the list of makes.

Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe.

S&F in repair wash hand basin, vitreous china, white, flat back (560x415mm) cutting for and pinning ends of brackets and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length. Make: Prayag model Rollin No 4062 or equivalent as in the list of makes.

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.

S&F in repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified Make: Prayag model Matrix 6508 or equivalent as in the list of makes.

S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair. Make: Prayag model Matrix 6508 or equivalent as in the list of makes.

S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified Make: Prayag model Matrix 6510 or equivalent as in the list of makes.

S&F 20 in reapir mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

Supply and fixed in repairs sinks without drainage board made of stainless steel (SS 304 grade) 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 510mm x 430mm bowl size 430mm x 380mm x 203mm all complete as specified and as directed. Make: Prayag model 1318D or equivalent as in the list of makes.

S&F in repair 0.85mm thick stainless( SS 204 grade) steel plate rack of size 31"x30"x10" complete all as specified Make: Prayag model P-346 or equivalent as in the list of makes.

Supply & fixing in repair of pillars taps brass chromium plated scewed for iron pipe 15 mm bore Make: Prayag model Matrix 6502 or equivalent as in the list of makes.

S&F Aluminium anodised,barrel tower bolts of extruded section of 75 mm size fixed

S&F in repair Aluminium anodised,barrel tower bolts of extruded section of 75 mm size fixed

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified Make: Prayag model Matrix 6555 or equivalent as in the list of makes.

S&F in repair central hole basin mixer for WHB complete all as specified Make: Prayag model Matrix 6550 or equivalent as in the list of makes.

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as specified and as directed. Make: Prayag model GLECY No 4022 for pan or equivalent as in the list of makes.

Supply and fix PVC (SWR) pipes 110mm dia,type 'A' conforming to IS, single socketed, in any length with rubber ring joints laid in trenches or floor complete all as specified.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed (Bore of pipe 110mm)

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair

M&L in repairs for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair

Supply and fix PVC (SWR) pipes 75mm dia,type 'A' conforming to IS, single socketed, in any length with rubber ring joints laid in trenches or floor complete all as specified.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed (Bore of pipe 75mm)

M/s. RAMPHAL GARG

M/S NIKITA ENGINEERING CO

N K Construction

Shri Amarnath Sah

S. G. CONSTRUCTION

R.MANJIT& CO

M/S SINHA ENTERPRISE