Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹37.0 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹37.1 L+₹7,987 (0.22%)Rejected-AOC R O ABI GUZAR THE BUND SRINAGAR 190001 J K | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-2 | Rejected-AOC Other than lowest | |
| 3 | L-3₹37.5 L+₹50,329.37 (1.36%)Rejected-AOC | L-3 | Rejected-AOC Other than lowest | |
| 4 | L-4₹43.8 L+₹6.7 L (18.2%)Rejected-AOC | L-4 | Rejected-AOC Other than lowest |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF CERTAIN SANCTION WORKS AT BARAMULLA UNDER GE 969 EWS
2022_MES_552092_1
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
BARAMULLA
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹78,000
Yes
15 Nov 2022
15 Sept 2022
17 Oct 2022
15 Sept 2022
15 Oct 2022
30 Sept 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.
Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.
Excavaton in post holes (or similar holes) each n.exc 0.5 cm, getting out,returning filling in and ramming earth or broken rubble mixd with earth around in layers n.exc 25cm in hard/dense soil complete all as specified and as directed.
Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.
Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point all as directed by Engr-in-charge
M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L Plain Cement concrete Type B-2, 1:2:4 (40mm graded aggregate) as in foundation, filling and mass Concrete complete all as specified and as directed.
M&L pre-cast cement concrete block masonry Type C-1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and seting in cement mortar 1:6 complete all as specified and as directed.
M& L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note WPC shall be measured and paid separately).
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
M & L for hardcore of gauge not exceeding 63 mm of broken stone,deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and as directed.
M&L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base complete all as specified and as directed.
M&L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tol match over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed.
M&LGlazed ceramic tile 600 x 300x10mm thick (coloured) on verticall surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and as directed.
S&F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
M &L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing complete all as specified.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc complete all as specified.
S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-ll, 2010 as specified.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing relevant item complete all as specified and as directed.
S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane.
S&F Butt hinges, 100 mm long medium weight, cold rolled mild ISI marked complete all as specified and as directed.
S&F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and as directed.
S&F 75mm butt hinges, medium weigh cold rolled mild steel and fixed complete all as specified and as directed.
S &F 150mm long aluminium anodised cast type alumiinium handle SI marked complete all as specified and as directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe.
S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified.
S&F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore complete all as specified and as directed.
S&F single piece 'WC with UF soft closet seat cover, hinge, fixing accessories including flushing cistern size (370x690x795) mm includig S trap 300mm, health faucet and jet spray complete all as specified and as directed.
S&F vitreous china urinal, Half Stall type, white (excluding flusing cistern, flush pipe and waste pipe complete all as specified and as directed.
S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed.
S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts Supplied and fixed complete all as specified.
S&F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified.
S& F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring ioints laid in trenches or in floors complete all as specified.
S&F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified.
S&F 100mm bore PVC (SWR) T' any radius.
S&F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified and as directed.
S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified.
S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165.
S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV stabilized and antimicrobial welded having thermal stability for hot and cold water complete all as specified and as directed.
S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV stabilized and antimicrobial welded having thermal stability for hot and cold water complete all as specified and as directed.
S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 25mm PPR Gate valve inserted as per requirement of site.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms) complete all as specified.
S&F Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length, bent to shape required including cranking bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
All as per item above but 5mm dia and above including 10mm dia in stirrups.
M&L pre-cast cement concrete Type B-1, 1:2:4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc complete all as specified and as directed.
S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n. exc 25 Sqcm complete all as specified and as directed.
S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed.
M&L for 4mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc.
S&F CP basin mixer for hot & cold water supply and fixed complete all as specified and directed.
S&F Toilet paper holder, brass chromium plated, fixed tro walls with chromium plated brass screws, complete all as specified and directed.
S&F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed.
S&F Vitreous china wash basin counter type of fixe 600mmx450mm including waste pipe, coupling and brackets etc complete all as specified and as directed.
M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-2 using (20mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
Cutting into existing manholes for connecting new drains of pipe 100mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete Type B-1, 1:2:4 and smooth finished and reforming benching as required.
S& F for 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane.
Supply only integral water proofing compound.
S&F Welded steel wire fabric supplied & fixed complete to wood or steel members Weight per square metre n exc 4 kg complete all as specified and as directed.
M&L hard core with broken boulder exc 63mm, deposited, spread and leveled in layers n. exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L for RCC (nominal mix) in beams, cantilevers, bressumers, lintels over 1.5m span, type B1 1:2:4 (20 mm graded aggregate) complete all as specified and as directed.
Form work to sides and soffits of lintels, rough finished surfaces of concrete.
S&F framed work such as grills, gratings etc with end bars shouldered and/or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290, Gde-E-165.
S&F in for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc.,also fastening and fixing complete, complete all as specified and as directed.
S&F mild steel, plain black sheet in hearth, covering to door shutters, covering to door frames, chullah hoods, etc with plain 40 mm lap joints or welded/riveted seams including bending. turning up, mitred angles, stoped ends, outlets etc as required of thickness 0.63 mm thick complete all as specified and as directed.
Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or cement concrete surfaces complete all as specified and as directed.
M & L preparation of new untreated surfaces of steel and iron of any description, over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red-oxide primercomplete all as specified and as directed.
S&F butt hinges medium weight cold rolled steel 75 mm long complete all as specified and as directed.
S&F mild steel sliding door bolts of 150mm in length complete all as specified and as directed.
Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in 1:4 CM, RCC cover slab in M -25/RR masonary /filling with brick bats, complete of size 1.80 mm dia x 3.00 m deep complete all as specified and as directed.
LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6mm plate embedded allround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 10 users complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete complete all as specified and as directed.
M&L Brick work with sub class 'B' burnt bricks (old size bricks) straight on Curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and as directed.
M&L 1:2:4 types B-1 (using 20 mm graded stone aggregate as in coping etccomplete all as specified and as directed.
M&L for 150 mm dia Reinforced concrete pipes , class NP3, laid and jointed complete with collars.
M&L for concrete bed to drain pipes in PCC 1:3:6 type -2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia.
Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc.
Extra for forming fair faces(finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and as directed.
M&L for repairs to surfaces of macadam roads by scarifying or picking gravelled macadam or bituminous macadam surfaces in areas exc 400 sqm and n. exc 50mm deep complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with 8 to 12 ton capacity power roller. Complete all as specified and directed.
M&L 100mm thick PCC concrete 1:4:8 type D-2 using (40mm graded aggregate) as in sub-base floor, paving and hardstanding complete all as specified and directed.
M&L for cement concrete in pavement/hard-standing of flexual strength 40kg/per sqm in field using 400 kg of cement per cubic meter, thickness of concrete 25cm or less complete all as specified and directed.
Formwork to edge of conctete flats, treads, floors, breaks in window cills, concrete railing, opening in concrete walls, floor and roofs nexc 20cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but nexc 20cm wide complete all as specified and directed.
Forming 12mm thick expansioin joints filled with pre- formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' complete all as specified and directed.
Forming constraction (dummy) joints 65mm deep 10mm wide, filled with sealing compound all as specified and directed.
Forming constraction joints 30mm deep x 10mm widel filled with sealing compound complete all as specified and directed.
Removing excavated material exc 250m but n. exc 500m and depositing where diected. Complete all as specified and as directed.
M&LEarthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized iron strip 32x6mm as earth lead connected to earth plate electrode by means of bolts, nuts, check nutsand washers, earth wire protected with and including 40mm bore light grade ISI marked GI pipe upto 7.5 mtrs long all as shown in electrical plate no 5 of MES schedule part-I, with and including PCC 1:2:4 type B1 pit with cover of RCC 1:2:4 type B1, reinforced with welded steel wire fabric not less than 4 kg per sqmtr with handle and angle iron frame, watering arrangement with 20 mm bore GI medium grade pipe ISI marked, GI fannel with GI mesh, filling with mixture of common salt and charcoal,necessary excavation,refilling, removing away spoil and earth work in any type of soil, including test point, testing and commissioning complete all as specified and as directed.
M&LEarthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel. 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on Completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc.Complete all as specified and as directed.
Supply and fixing of Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and as directed.
M&L for test point terminal block made of gunmetal or phosphorous bronze of size 75x75x25mm drilled & screwed incl 3 Nos 8mm dia 25mm long base head screws.
S&F Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 40mm dia complete all as specified and directed.
Supply and fixing of 20x3mm copper strip with saddles and fixing screws etc fror roof conductors and down conductors above ground all as specified and as directed.
Supply and fixing of Air termination, single pointed, copper rod 12mm dia and 300mm Iong all as specified and directed.
M&L for earthing with copper earth plate 60x60cmx3.15mm thick electrode burried directly in ground (Eart pit not less than 2.25 mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 metres below normal ground level, connected to 20x3mm copper strip as earth lead connected to earth plate electrode by means ofbolts,nuts,check nutsand washers,earth wire protected with and including 40 mm bore light grade ISI marked Gl pipe upto 7.5 meters long all as shown in electrical plate no 5 of MES schedule part-1,with and includingPCC 1:2:4 type B1 pit with cover of RCC 1:2:4 type B1,reinforced with welded steel wire fabric not less than 4 kg per sqmtr with handle and angle iron frame.watering arrangment with 20 mm bore GI medium grade pipe ISI marked, GI fannel with GI mesh, filling with mixture of commen salt and harcoal,necessary excavation, refilling, removing away spoiland earth work in any type of soil,including test point, testing and commissioning all as specified..
M&L for point wiring in PVC conduit with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way.
One 3 pin 5 Amp switch socket outlet on same board.
S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
Supply and fix ceiling rose 3 terminal / PVC/Polycarbonate, isolated body.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED lighf driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections.
House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade two nos 90 degree bends. M.S. hook and stay or guy
M&L for Steel Water Tubing of medium grade with all fitting laid in trenches/ floor/duct/ ceiling/wall for the bore of tube 20mm.
S&F for stop valves cast copper alloy screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions and fixed for fancy type chromium plated for bor dia of 20mm.
Supply and fixing amp rating 240V, 1OKA C Curve miniature circuit breaker (MCB) of SP 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning .Complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 5 to 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning. Complete all as specified and as directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .