Construction of link road from village Masoli Bagla Machhyal roa km. 0/0 to 4/0

Amount

Earth work in excavation for structures in all depths as per drawing and M.O.R.D.technical specification section 300 & 1600 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge, hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness and finishing the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage, rain and other causes it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responsibility of the contractor which shall have to be duly compensated by him at his own cost .

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203. Plain cement concrete Grade M-10 complete within all leads, lifts carriage of material and other incidentials.

Providing and laying reinforced cement concrete in super structure as per drawing and technical specifications clauses 800, 1205.4 & 1205.5. Reinforced cement concrete M-25 (1:1.5:3) (one cement : one and half sand : three graded stone aggregate 20mm (twenty millimetre) nominal size) upto any height complete within all leads, lifts carriage of material and other incidentials.

Supplying, fitting and placing HYSD bar reinforcement in super structure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 complete within all leads, lifts carriage of material and other incidentials.

Providing and laying Plain / reinforced cement concrete in substructure complete as per drawings and technical specifications clause 802, 804,805,806,807,1202 & 1204. PCC Grade M-15 (nominal mix 1:2.5:5) upto 5m height and curing complete within all leads, lifts carriage of material and other incidentials.

Providing and laying cement concrete 1:5:10(one cement: five sand:ten graded crushed / broken stone aggregate 40 mm (forty milimeters) nominal size ) plums and curing complete including the cost of form work in Retaining walls Breast walls, in or under water complete including, pumping or bailing out water ,dewatering removal of slush as required at site which may arisen at the time of laying under water complete for all heights/depths including cost of form work as per drawings and MORD technical specifications section 800, 900,1200 & 1600 and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals .

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 complete within all leads, lifts carriage of material and other incidentials.

Back filling behind abutment wing wall and return wall complete as per Drawing and technical specifications clause 1204.3.8 Granular material complete within all leads, lifts carriage of material and other incidentials.

Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification. Rubble stone laid in cement mortar 1:5 (one cement : five sand) complete within all leads, lifts carriage of material and other incidentials.

Construction of R.C.C. railing of M-25 (M- twenty five) grade in cast -in-situ with 20 mm (twenty five milimeter) nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred) , c/c spacing between vertical posts not to exceed 2000 mm (two hundred milimeter) as per drawing and technical specifications clauses 800, 900 and 1208.3 complete within all leads, lifts carriage of material and other incidentials.

Construction of Drainage spouts complete as per drawing and technical specifications clauses 1209 complete within all leads, lifts carriage of material and other incidentials.

Providing weep hole in brick masonry/ stone masonry / plain reinforced concrete abutment , wing wall, return wall with 100mm dia.(one hundred millimetre diametre) PVC pipe extending through the full width of the structures with slope of 1V:20H (one vertical isto twenty horizontal) towards drawing face complete as per drawing and technical specifications clauses 614,709,1204.3.7 including carriage of material and other incidentials.

Costruction of embankment with approved material obtained from borrow pits with a lift 1.5mtrs transporting to site , spreading, grading to required slope and compacting to meet requirment of table 300.1 amd 300.2 with a lead upto 1000m.as per Technical Specification Clause 301.5 including carriage of material and other incidentials.

Vishwas Rathore

Ayush Thakur