General Funds 2025- 2026

Earthwork excavation for footings in ordinary soils up to 3.00 m depth by manual means excluding dewatering as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH.

Filling with Stone crusher dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS No. 309 & 310).

Plain Cement Concrete (1:4:8) (cement: fine Aggregate: Coarse Aggregate) for foundations using coarse Aggregate 40mm size hard, machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 Cum) capacity including cost and conveyance of all materials like cement, sand, coarse Aggregate, water etc. to site including all Charges for machine mixing and hire Charges of concrete Mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M- 20 Nominal Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work For Footing.

RCC M- 20 Nominal Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work For Pedastals.

RCC M- 20 Nominal Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work For Column.

RCC M- 20 Nominal Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work For Plinth beams.

RCC M- 20 Nominal Mix as approved by the department Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work For Lintels.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Brick Masonry for Walls in superstructure with CM (1:6) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having Minimum Crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour Charges, like mixing cement mortar, scaffolding Charges, constructing masonry, lift Charges, curing, etc.,and overheads & contractors profit complete for finished item of work.

Reinforced Brick Masonry for 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage Charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance Charges of materials.

Plastering 12mm Thick for Internal Walls using screened sand with base Coat of 8 mm Thick in C.M (1:5) and top Coat of 4mm Thick in C.M (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental Charges on materials and including cost of all labour Charges for mixing mortar, finishing, scaffolding, lift Charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Plastering 20 mm Thick for External Wall in Two Coats using Screened Sand with Base Coat of 16 mm Thick in CM(1:6) and top Coat of 4 mm Thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental Charges on materials and including cost of all labour Charges for mixing mortar, finishing, scaffolding, lift Charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Supplying and fixing in position M.S tubes & pipes of all diameters as per ISI 1161 of approved size design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the same with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours.

Painting to New Walls with 2 Coats of Acrylic Emulsion Paint Interior Grade with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams / Liter of approved brand Over 1 Coat of Cement Primer and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour Charges etc. complete for finished item of work as per SS 911 for Internal Walls.

Painting to New Walls with 2 Coats of Acrylic Emulsion Paint Interior Grade with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams / Liter of Approved brand over 1 Coat of Cement Primer and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour Charges etc. complete for finished item of work as per SS 911 for External Walls.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame of size 750mm x 2100mm

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour.

Supply & fixing NP soap dish heavy type with NP Screws

Supplying & Fixing white glazed Flat Back Half Stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm including cost and conveyance,sales tax of all materials and labour Charges etc., complete as per special specification and as directed by Engineer-in-charge for finished item of work.

Supplying & Fixing of 4" (76.2 mm ) Nahany Trap [without inlet & jali] UPVC/ SWR pipe fittings [prince/ sudhakar or any ISI Brand]

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supplying and fixing of Gunmetal Gate (GM peet) valve as per IS - 778 Class-I, Indian make heavy type - 25mm nominal bore size.

Supplying and fixing Angle Stop Cock 12.7 mm dia first quality Indian Make 400 grams Seiko / Senior / Nice or equivalent.

Suply & fixing of 12.70mm CP Long body bib cock fancy type deluxe heavy duty Indian make heavy duty Seiko/ Senior/ Nice/ Senior/ Nice or equivalent at all levels including cost & conveyance, seignarage, sales tax royalties of all materials, labour Charges for finished item of work as per special specification and as directed by the Engineer-in-charge for finished item of work.

Supply and fixing 12.7mm NP Push Cock 1st quality Seiko / Senior.

Supply & Fixing 38.1 mm dia PVC Solid Waste Pipe Outlet.

Supply & Fixing of Round Jali

Supplying, laying and jointing in position the following sizes 3 M double Socket PVC / SWR pipe - 4 Kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand and including cost and conveyance,, conveyance of all materials etc., complete as per s.s. for finished item of work of 110mm dia pipes.

Supplying, laying and jointing in position the following sizes 3 M double Socket PVC / SWR pipe - 4 Kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand and including cost and conveyance,, conveyance of all materials etc., complete as per s.s. for finished item of work of 75mm dia pipes.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 110mm dia Plain bend 87.5 Degrees.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 75mm dia Plain bend 87.5 Degrees.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 110mm dia door bend 87.5 Degrees.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 75mm dia door bend 87.5 Degrees.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 110mm dia Single Tee with door.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 75mm dia Single Tee with door.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 110mm dia Coupler.

Supply of Prince/ Sudhakar make or eqivalent quality U.V resistant UPVC SWR pipe fittings (as per ISI standards ) of 75mm dia Coupler.

Supply and Fixing of 20mm dia 2mm thick P.V.C Pipe (ISI MARK) Concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep Box Including All Labour Charges etc., Complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C Insulated Flexible Copper Cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 8 modular cover frame covering to switch control box including all labour Charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings using Modular Switches

Supply and fixing of 18-20W, not less than 1100mm length LED Batten Light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt, PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, Minimum CRI>70, etc., complete with earth connection and not less than two years warranty. including cost and conveyance of all materials including frame and tube etc., complete.

Supply of 16 Sq mm ISI marked WPTC (Weatherproof Twin Core) ISI Aluminum Wire.