PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-84 (PART-A) IN NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL CORPORATION.

NAME OF WORK: PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS

AT TP-84 (PART-A) IN NEW EAST (SARTHANA) ZONE-B, SURAT

MUNICIPAL CORPORATION.

Tender Notice (Online No: DMC/Drainage/03/2026-27, (Work No.03)

VOLUME-II: PRICE BID

Last date of download of tender : 20/07/2026 to 20/08/2026.

documents from website

smctender.nprocure.com

Pre-bid query : Bidders shall have to post their queries on e-mail

address [email protected] on

or before Date:05/08/2026

Last date of submission of online : Up to 20/08/2026, up to 18:00 hrs.

Last date of submission of tender : From 21/08/2026 to 02/09/2026 to Chief

fees, EMD and other documents in Accountant SMC, Muglisarai, Surat by

hard copy (as mentioned in R.P.A.C./Speed Post up to 17:00 hrs.

Tender Document)

Estimated Cost : Rs. 12,97,57,236.99/-

Earnest Money Deposit (EMD) : Rs.

50% shall be in the form of crossed Demand Draft

of Nationalised Bank payable at Surat and

remaining 50% shall be in the form of Bank

Guarantee of Nationalised Bank (encashable at

Surat) or 100% EMD amount shall be in form of

crossed Demand Draft of Nationalised Bank

payable at Surat

Document Fees : Rs. 21,240.00 (Incl. CGST 9% and SGST 9%)

Opening of Tender (Online) : From 21/08/2026, 10.30 Hrs. onwards. If possible

Tender to be submitted to:

The Chief Accountant,

Surat Municipal Corporation,

Muglisarai, Surat 395

1. NAME OF WORK

PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-

84 (PART-A) IN NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL

1) ESTIMATED COST OF CAPITAL WORK: Rs. 12,97,57,236.99/- (Excluding

(Twelve Crore Ninety-Seven lakh Fifty-Seven Thousand Two Hundred Thirty-Six

Rupees and Ninety-Nine paisa only.)

PERCENTAGE HIGHER / BELOW OF Rs. 12,97,57,236.99/- (Excluding GST)

TENDER AMOUNT (IN FIGURES): Rs. __________________

TENDER AMOUNT (in WORDS): Rs. __________________

Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall

be paid extra as per prevailing rules.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

SR. RATE AMOUNT

ITEMS QTTY. PER

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and

line including safety provisions using

site rails and stacking excavated stuff

including up to all required lead

cleaning the site etc. complete for all

lifts and strata as specified.

In hard murrum, boulders incl. 6108.00 155.25 C.M.

Excavation in bituminous road as per

required gradient and line including

safety provisions using site rails and

stacking excavated stuff including up

to all required lead cleaning the site etc.

complete for all lifts as specified.

Excavation in Bituminous road 6108.00 288.65 C.M.

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and

line including safety provisions using

site rails and stacking excavated stuff

including up to all required

leadcleaning the site etc. complete for

all lifts and strata as specified.

In C.C. Road 1527.00 427.80 C.M.

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and

line including safety provisions using

site rails and stacking excavated stuff

including up to all required lead

cleaning the site etc. complete for all

lifts and strata as specified.

In all sorts of soil and soft murrum

(A) Upto 1.5 Mt. dpt.from G.L. 100390.00 102.35 C.M.

(F) 7.50 Mt TO 9.00 Mt depth 50.00 162.15 C.M.

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing cutting of existing

bituminous surface up to suitable depth

in line and alignment using

Mechnically operated cutter machine

before excavating existing surface for

utility laying including cost of all type

of machinery, fuel, labour etc. and as

per direction of engineer incharge. 14313.00 51.00 RM

Supplying & Filling with fine sand in

compacted thickness over the base

including watering ramming,

consolidating & dressing etc.

complete. Item includes by using

vibratory plates compacted machine

and as directed by engineer in charge 5560.00 329.00 C.M.

Providing and supplying ISI Standard

R.C.C. pipes in standard lengths of

following class and diameter suitable

for rubber ring joints including all

taxes, insurance, transportation,freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

departmental stores, stacking etc. One

rubber ring should be supplied with

each full length socketed pipe, cost

included in rates below.

Lowering, laying and jointing of

following diameters in proper position,

grade and alignment at all level as

directed by Engineer-in-charge

including conveyance from stores to

site of work, labour, giving hydraulic

testing as per IS code.

(D1) 250 mm dia (NP3 Class) 3500.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 0.00 868.55 Rmt. -

(E1) 300 mm dia (NP3 Class) 1982.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 719.00 1223.85 Rmt.

(F1) 350 mm dia (NP3 Class) 959.00 1031.95 Rmt.

(F2) 350 mm dia (NP4 Class) 777.00 1531.95 Rmt.

(G1) 400 mm dia (NP3 Class) 476.00 1324.80 Rmt.

(G2) 400 mm dia (NP4 Class) 814.00 2047.80 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

(H1) 450 mm dia (NP3 Class) 435.00 1557.65 Rmt.

(H2) 450 mm dia (NP4 Class) 597.00 2375.65 Rmt.

(I1) 500 mm dia (NP3 Class) 264.00 1702.35 Rmt.

(I2) 500 mm dia (NP4 Class) 251.00 2554.35 Rmt.

(J1) 600 mm dia (NP3 Class) 1053.00 2208.20 Rmt.

(J2) 600 mm dia (NP4 Class) 453.00 3256.20 Rmt.

(K1) 700 mm dia (NP3 Class) 620.00 3205.20 Rmt.

(K2) 700 mm dia (NP4 Class) 467.00 4208.20 Rmt.

(L1) 800 mm dia (NP3 Class) 90.00 3522.30 Rmt.

(L2) 800 mm dia (NP4 Class) 115.00 5922.30 Rmt.

(M1) 900 mm dia (NP3 Class) 0.00 3992.00 Rmt. -

(M2) 900 mm dia (NP4 Class) 0.00 7029.00 Rmt. -

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt. -

(N2) 1000 mm dia (NP4 Class) 0.00 8713.25 Rmt. -

(O1) 1100 mm dia (NP3 Class) 0.00 5533.35 Rmt. -

(O2) 1100 mm dia (NP4 Class) 0.00 9141.35 Rmt. -

(P1) 1200 mm dia (NP3 Class) 0.00 6405.00 Rmt. -

(P2) 1200 mm dia (NP4 Class) 127.00 10210.00 Rmt.

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt. -

(Q2) 1400 mm dia (NP4 Class) 432.00 14801.10 Rmt.

(R1) 1600 mm dia (NP3 Class) 0.00 11830.55 Rmt. -

(R2) 1600 mm dia (NP4 Class) 244.00 18365.55 Rmt.

(S1) 1800 mm dia (NP3 Class) 0.00 14355.50 Rmt. -

(S2) 1800 mm dia (NP4 Class) 386.00 20002.50 Rmt.

(T1) 2000 mm dia (NP3 Class) 0.00 16880.45 Rmt. -

SR. RATE AMOUNT

ITEMS QTTY. PER

(T2) 2000 mm dia (NP4 Class) 52.00 21718.45 Rmt.

(U1) 2200 mm dia (NP3 Class) 0.00 19405.40 Rmt. -

(U2) 2200 mm dia (NP4 Class) 0.00 23434.40 Rmt. -

Providing and constructing Sewer

machineholes, scraper machineholes

and unit house connection chamber, as

per the type design in brickmasonry in

C. M. 1:5 and inside and outside 20mm

thick plastering in C. M. 1:3 necessary

100 mm coping with reinforcement in

R.C.C.M.200 fixing C. I. steps and

fixing machinehole frame and covers

(But excluding supply of machinehole

frame and covers) over machineholes

and house connection chambers and

fixing machinehole covers (but

excluding supplying of machinehole

covers) over scraper machinehole etc.

complete,providing and fixing safety

chain wherever necessary as per the

stipulations in the type design

complete as per latest CPHEEO

manual.(excl. excavation).

TYPE-A 1200 mm DIA

0.70 mt.Depth - 10190.60 No. -

0.80 mt.Depth - 10853.40 No. -

0.90 mt.Depth - 11516.20 No. -

1.00 mt.Depth - 12179.00 No. -

1.10 mt.Depth - 12841.80 No. -

1.20 mt.Depth - 13504.60 No. -

(Add or Deduct Rs.662.8 per

0.10 Mt.Depthincrease or

TYPE- B 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.1231.3 per

0.10 Mt.Depthincrease or

SR. RATE AMOUNT

ITEMS QTTY. PER

TYPE-C 1500 mm DIA

(Add or Deduct Rs.1878.6 per

0.10 Mt.Depthincrease or

TYPE-D1 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2211.00 per -

0.10 Mt.Depthincrease or

TYPE-D2 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2212.10 per -

0.10 Mt.Depthincrease or

TYPE-D3 1900 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2601.50 per

0.10 Mt.Depthincrease or

TYPE - S-1 (RECT.)

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.3190.70 per

0.10 M Depthincrease or

Providing and Fixing in position

R.C.C. ventilating column as per

drawing 38.00 16660.00 No.

Dewatering by pumping set of required

capacity including temporary platform

carting pumping at site and fixing the

same in position including all

accessories, and fuel and labour etc.

Pump set of Capacity 5000.00 18.32 HP/Hr

RCC precast M.H. Frame & Cover

Manufacture, supply & Delivery at

store or at site of work precast RCC

M.200 Frame & cover suitable to

drainage M.H. and as per type design

& Drawing including cost of

reinforcement M.S.Angles or Flat,

curing mold work etc.

(A) For Circular machinehole (heavy 0.00 2294.00 No. -

(B) For Scraper machinehole. 0.00 7289.00 No. -

(C) For House Connection Chamber 0.00 1733.00 No. -

Providing and filling Rubble including 0.00 1064.80 C.M. -

hand packing and filling interstices

with quarry spalls behind abutment and

between ruturns as derected.

Shoring or timbering for trench with

mm thick planks and suitable size

struts etc. complete. 45260.00 81.65 S.M.

Refilling of pipeline trenches incl.

ramming, watering, consolidating

disposal of surplus stuff as directed

within a radius of 3 km. 118174.00 25.30 C.M.

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing and constructing rectangular

brick masonry chamber for house

connection as per type design in brick

masonry in C. M. 1:3 including M-100

in foundation M-150 in benching

inside plastering in C. M. 1:3 and

outside plastering in C. M. 1:3 coping

in M200 and fixing RCC precast

machine hole frame and covers, but

Excl. supply of machine hole and cover

etc. complete excl. excavation. 1860.00 7922.00 No.

Making connection with the machine

hole by boring hole on the masonary of

machine hole and jointing pipe with

cement mortar in prop. (1:2) inside as

well as outside of existing machine

hole,curing etc.complete as directed by

Engineer-in-charge. 0.00 267.86 No. -

Corrugated DWC HDPE pipes (non-

pressure pipes)-Providing and

supplying of Class SN8 Structured

Wall polyethelene Piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-

smooth External Annular Corrugated

and Smooth Internal Surfaces (Double

Wall) for non-pressure underground

Sewerage & Drainage application as

per EN:13476-3 including all local and

central taxes, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete.(ID

Providing and supplying in standard

length ISI mark rigid unplasticised

PVC pipes suitable for potable water

with ring fit joint including cost of

rings, as per IS specification no.

4985/1988 including all local and

central taxes, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores and including cost

of jointing meterial etc. complete.

Lowering, laying, fixing and jointing

PVC/uPVC/cPVC pipes and specials 75.00 113.25 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

of following class and diameter

including cost of conveyance from

stores to site of works including cost of

labour, material, cement solvent,

giving satisfactory hydraulic testing as

Work of Temporary diversion of

sewage by plugging the machineholes

at upstream and downstream of the

sewer stretches proposed to be

replaced. The rubber plug required for

the plugging the drainage line shall be

procured by the contractor and the

same shall be the property of

150mm-400mm sewer line 12.00 20089.29 Nos.

450mm-600mm sewer line 12.00 20982.14 Nos.

700mm-1200mm sewer line 6.00 23660.71 Nos.

Providing & Installation of barricades

incl. supplying, painting, with

flurescent paint and fixing, CGI sheets

24 SWG of 1.80 m height & M.S. posts

angle 40 x 40 x 5 mm at 2.0 m c/c and

dismantling the same after complition

of work as directed by Engineer - in -

Charge. 10190.00 196.43 SM

Carting and Recarting of excavted

earth from any site to required place as

per requirement and directed by

engineer in charge

Preparation of as built drawing of

pipeline and different valves laid under 14.31 6250.00 KM

SR. RATE AMOUNT

ITEMS QTTY. PER

this work by showing location of each

and every pipe in two dimension-

horizontal and vertical with respect

GIS systemalong with invert levels of

the pipeline and different valves . The

Contractor shall submit two sets of as

built drawings periodically, without

which the subsequent R.A. Bill of the

work will not be processed payment

purpose. On completion of the entire

work the contractor shall submit as

built drawings for the whole work in

six (6) sets along with two (2) soft

copies as directed by the Engineer-in-

charge. The item includes all required

equipments, materials, man power for

execution of complete item.

Drilling of various dia Horizontal

borehole for watermain pipeline

crossing under the road incl. in all

strata with required length incl

providing and fixing of various dia

M.S/RCC casing pipe with pushing etc

complete for various dia without

Watermain & with Providing and

Fixing of MS Casing pipe of

following diameter.

824 mm OD 12 mm thickness - 22358.84 Rmt. -

924 mm OD 12 mm thickness 55.00 24911.46 Rmt.

1028 mm OD 14 mm thickness - 31065.24 Rmt. -

1232 mm OD 16 mm thickness - 41189.38 Rmt. -

1420 mm OD 20 mm thickness 20.00 57779.51 Rmt.

1844 mm OD 22 mm thickness - 80070.79 Rmt. -

2248 mm OD 24 mm thickness - 105184.36 Rmt. -

Demolition/Dismentalling RCC work

or masonary work or removing of

paver block flooring in any part

inculuding stacking of

serviceable/useful material and

disposal of unserviceable material with

all lead and lift.

(a) Brick masonary work/Paver block 25.00 550.40 CM

(b) RCC work 25.00 1057.47 CM

(c) Unreinforced c.c. 25.00 609.26 CM

Providing and Casting in situ mass

cement concrete in grade M10

proportion 1:3:6 (1 cement :3- coarse

sand : 6- graded stone aggregate of

mm nominal size)using granite

quartzite trap metal of size 12mm to 10.00 3662.00 CM

SR. RATE AMOUNT

ITEMS QTTY. PER

25mm including consolidation curing

Without Formwork

Providing & construction brick work

using Fly Ash bricks having crushing

strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. Foundation

and plinth 15.00 4237.00 CM

Providing & Applying 15 mm th.

Cement plaster in single coat on

brick/concrete walls similar surfaces

for plastring & finished even & smooth

with a floating coat of cement slurry

mixed with admixture of lime or neeru

in required proportion etc. complete in

C.M. 1:3 (1 Cement : 1-sand) 100.00 237.51 SM

Providing and laying cement concrete

1:1.5:3 (1 cement: 1.5 sand: 3 graded

stone agg. 20 mm nominal size)&

curing comp. lnclud.cost of form work

but exclu. Cost of reinforcement for

reinforced concrete work in : (A)

Foundation, footing, Base of columns

and Mass concrete. 10.00 5292.00 CM

Warning tape WARMAT ® Brand PE

warning tape with Anti Rodent

Properties ( Con Toxic, Non

Hazardous Eco friendly ROHS

Compliance & 100% recyclable) Moc

: LDPE, Roll length : 250 Mtr, Color :

Green, Text : Black / White, Length

with non deletable high abration.

(i) Size : 300 mm width x 100 Micron

Providing & laying in trenches

galvanised mild steel tubes(medium

grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following

nominal bore & tube fittings etc.

25mm.dia. 50.00 282.18 Rmt

40 mm dia 50.00 425.33 Rmt

65mm dia 50.00 723.83 Rmt

Providing mantaing upto the required

period safe guarding lightening the

excavated trenches with proper 150.00 12.05 Sqmt

SR. RATE AMOUNT

ITEMS QTTY. PER

barricading, fencing with timer balles,

bamboos, G.I. sheets, red fiag and red

lights alongwith the provision of the

chowkidars as directed by Engineer-in-

Temporary diversion of sewage from

House connection chambers,

Intermediate machineholes and Tee

chambers through 150 mm dia

corrugated Hose pipe supported at

suitable distances from the side and

conveying the sewage by gravity to the

downstream machinehole. 10.00 44.64 Rmt.

Providing & construction simple

chamber of 23 cm. th' B.B. Masonary

in C.M 1:5 with cement plaster 15 mm

th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing

C.I. cover with frame to be not less

than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm

deep for single pipe

(A) Same as above but Precast RCC

heavy duty Cover instead of C.I. Cover 5.00 2681.76 No.

Extra for every additional depth of

mt beyoung 0.45 mt 0.00 242.39 Each -

Removing of existing pipeline incl.

removal of specials, valves jointing

material including carting and

stacking of removed material from

site of work to the department store

as directed excl. excavation and

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing and casting in situ C.C. in

grade M-15 (approx. corresp. to prop.

1:2:4) (proportions as per mix design

or as per Table 9 of IS456 2000 in

masses by weigh batching ) using

granite, quartzite trap metal of size

mm to 20 mm for RCC work, including

scaffolding centering, form work,

needle vibrated consolidation, curing

comp. up to 6 meter depth or height

(excluding cost of reinforcement and

neat finishing) with centering and

shuttering/deshuttering etc. comp. for

the thrust block inclg. cost of form

work. With Formwork 5.00 4906.00 Cum

Providing and casting in situ C.C. in

grade M-20 (proportions as per mix

design or as per table9 of IS456

in masses by weigh batching ) using

granite, quartzite trap metal of size

mm to 20 mm for RCC work, including

scaffolding centering, formwork,

needle vibrated consolidation, curing

complete up to 6 meter depth or height

(excluding cost of reinforcement and

neat finishing) with centering and

shuttering/deshuttering etc. complete

for structure other than water retaining

(Below G.L) 5.00 5520.00 Cum

Providing and cast in situ C.C. in grade

M-30 proportions of ingredients as per

mix design by weigh batching using

granite, quartzite trap metal of size

mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering

formwork, needle vibrated

consolidation, curing and hydraulic

testing etc. complete (excluding cost of

reinforcement) with centering and

shuttering/deshuttering etc. comp. up

to 6 meter height /depth Av. G.L.for

all water retaining structures

( A )Bottom base slab 5.00 6905.00 Cum

( B )VerticalWall/kerb (Th. Above 25 10.00 8083.00 Cum

(C) Column 5.00 9317.00 Cum

(D) Beam 5.00 8486.00 Cum

(E) Slab 5.00 8213.00 Cum

Steel work welded in built up sections,

framed work including cutting, 5.00 9047.86 Quintal

SR. RATE AMOUNT

ITEMS QTTY. PER

hoisting, fixing in position and

applying a priming coat of red lead

paint (A) in beams & joists channels

angles, tees, flats with connection

plates or angle cleats as in main &

cross beams,hip & trussed purlins

connected to common raffers & the

Providing, Laying and jointing on true

line and level UPVC pipe (SCH-40)

line of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings

make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed

on the wall the help of clamp at every

two meter C/C or shall be concealed as

directed including necessary fittings

etc. including testing of pipe and joints

and fixing the same with adhesive

solvent, including cost of all materials.

15 mm Dia 50.00 72.65 Rmt

25 mm Dia 50.00 91.84 Rmt

40 mm Dia 50.00 148.12 Rmt

50 mm Dia 50.00 195.67 Rmt

Supplying cutting, bending, binding

and placing in position steel as per plan

and design and as per ISS

including cost of steel and binding wire

for reservoirs / structures only

including lift upto 6 mt. height or depth

below G.L. for all diameters.

Thermo mechanically trated (TMT) 100.00 77.50 Kg

bars Fe-500 grade for all diameters.

Providing interlocking type Rubber 10.00 524.00 Sqm

moulded cement concrete paver block

of approved shape, design & colour

having 60mm thickness (M-35)

purchased from SMC's approved

paverblock manufacturer only & fixing

of fine sand bedding. Item includes

levelling by using vibratory plates

compacted machine. Item also includes

all materials, labour, equipments, tools,

plants, watering, cleaning etc.

(Without colour)

Providing constructing brick masonry

inlet chamber of 750 x 600 x 1500 mm

internal dimension with necessary 5.00 13548.00 No.

SR. RATE AMOUNT

ITEMS QTTY. PER

excavation refilling 350 mm thick

brick masonary in CM 1:4, 150 mm

thick PCC and benching in CC 1:2:4,

12 mm thick plaster in CM 1:3 for

inside and cement pointing in CM 1:3

for outside, providing and fixing pre-

cast RCC frame and cover of M-30

grade as per drawing and specifications

- Rate for 1.5 m depth. Add or ded. Rs.

701 for every 10 cm increase or

decrease in depth

Providing, Supplying and fixing brass

ferrule of approved make of following

sizes inclusive all taxes, insurance,

transportion, fright charge, inspection

charge etc. complete

Providing constructing brick masonary

INLET CHAMBER OF

750*600*1500 mm internal dimension

with necessary excavation refilling

mm th Br. masonary in C.M 1:4,150

mm th. p.c.c. & benching in c.c.

1:2:4,12mm th. plaster in C.M. 1:3 for

inside & cement poining in C.M. 1:3

for o/s prov. & fixing precast RCC

frame & cover of M30 grade as per

drawing & specification. rate for 1.5 mt

Add. or ded. Rs. 701 per every 10 cm

increase or decrease in depth 50.00 13,548.00 No.

Coloured RCC Precast Machinehole

Frame & Cover Manufacture, supply &

Delivery at store or at site of work

precast RCC M-40 Grade Frame &

Cover suitable to drainage

machinehole and as per type design &

drawing including cost of

reinforcement M.S. Angles or Flat,

curing mold work etc

(A) Extra Heavy Duty Machinehole

Frame of I.S.I. Mark 465.00 2294.00 No.

(B) For Scraper machinehole 20.00 7289.00 No.

(C) For House Connection Chamber 1860.00 1733.00 No.

TOTAL AMOUNT Rs.

TOTAL AMOUNT Rs.