SPL REPAIRS TO BLDG NO T-10 OR LIVING ACCN AT A COY (MT) UNDER GE (S) TEZPUR

Amount

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering complete all as specified and directed

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work complete all as specified and directed

All as per Itme No 2 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work complete all as specified and directed

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and directed

Dismanting timber boarding of any description fixed in any position complete all as specified and directed

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing complete all as specified and directed

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing) complete all as specified and directed

Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n exe 2 sqm complete all as specified and directed

Taking down chowkhat with shutter/without taking off shutter from the frame n exe 1.50 each complete all as specified and directed

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws complete all as specified and directed

All as per item No.12 above but plain sheet for ridge ,gutter etc fixed with self tapping screws complete all as specified and directed

M&L 2nd class HW in scantling fixed clean swan in framed work complete all as specified and directed

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails complete all as specified and directed

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspendr including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel trass any type of trass complete all as specified and directed

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F 30 mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side complete all as specified and directed

S&F 30 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) complete all as specified and directed

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each complete all as specified and directed

S&F Butt hinges medium weight cold rolled mild street and fixed size of hinges 50mm complete all as specified and directed

S&F MS 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete all as specified and directed

S&F 100mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F MS sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed length of the bolt in 300 mm dia 16mm complete all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specified and directed

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F as in repair galvanised mild steel wire 0.56mm nominal dia of wire & average width of aperatre 1.18mm fixed with fixed with tinned tacks or galvanised wire stapples complete all as specified and directed

M&L 15mm thick rendering in CM (1:4) on one side of lathing finishedd even and smooth without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and directed

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and directed

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement complete all as specified and directed

Supply and fix, as in repair,20mm dia curtain rails, mild steel, chromium plated, with fixing brackets, stops, rollers etc complete all as specified and directed

M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specified and directed

M&L Applying two coats of Oil bound distemper to old surfce wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment complete all as specified and directed

M&L Complete removal of existing treatment on old decorated plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed

M&L Applying two coats of cement base paint to newely plaster/previously untreated walls including preparation complete all as specefied and directed.

M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

M&L 100mm thick cement concrete type B2, (1:2:4) (40mm graded stone aggregate) as in sub bases, floors and Pavings complete all as specified and directed

M&L preparing surfaces at wood & wood based materials new or old at any description & girth not otherwise described & treated with tar or coal tar black paint complete all as specified and directed

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

E/M Portion:- Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. complete all as specified and directed

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet cover complete all as specified and directed

One light point controlled by one switch

One Ceiling/Exhaust Fan point controlled by one swtich

One socket point 5 Amps on the independent board

One socket point 5 amps on the same board

All as per item No 53 here in before but for One 6 pin multi, socket outlet, 15 Amps , independent, with cables 4 Sq mm of size complete all as specified and directed

M&L submain wiring with two single core PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC conduit/existing concealed conduit and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly complete all as specified and as directed.

M & L for switch sockets combnation 2 in 1, 5 amps flush type complete all as specified and directed.

M&l for socket outlet 2 in 1 3 pin 5 amps flush type complete all as specified and directed

M & L for switch socket combination 3 pin 5 in 1, 5/16 Amps complete all as specified and directed.

M & L for ceiling rose 3 pole/PVC/polycarbonate isoloted body complete all as specified and directed

S & F switch piano flush type single pole, one way 5 Amps complete all as specified and directed.

S & F LED light batten type 20 watt, 4 feet long, slim round profile with extruded polycarbonate , environment friendly energy efficient ready to use complete all as directed and specified.

S &F 20 Watt LED security light fitting, IP66 protection having top opening separate driver compartment including all acessories like clamp pipe etc complete all as specified and directed.

S & F Angle Holder PVC type with cord grip cap suitable for pendent fittings complete all as specified and directed.

S & F 15W B22 Base LED bulb 3 star complete all as specified and directed.

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed

S&F MCB SPN 6 to 32 Amp, 230 Volt complete all as specified and directed.

S&F MCB SP 6 to 32 Amp, 230 Volt complete all as specified and directed

Supply & Fix blanking plate of various sizes as per site requirement all as directed and specified.

S & F electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified

Taking down old submain wiring of any size including old unsv casing caping and all accessories complete all as specified and directed.

Taking down ceiling fans sealing cable ends dismantling blades and removing fan and keeping in safe custody for reuse.

S & F ceilling fan of 5 star rating of 1200 sweep 230 volt Ac 50 Hz including downrod and all its accessories complete all as specified and directed.

Hanging only ceiling fans and connecting up including replacement of cable from ceiling rose to connector. (Ceiling fan shall be issued retrived from item no 71 free for fixing) complete all as specified and directed

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth strip in size 25X3.15 mm connecting to TPN main DB by means of nut bolts and washers etc. made out of galvanised iron and GI wire connected to main DBs check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:2:4) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth workcomplete all as specified and directed Electrical plate no 3 of SSR Part-I.( 2 Nos per DBs)

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/S MOHANPASARI

Sidhartha Bora

Chinmay Traders

M/s Borah Enterprise

KIRTEE KAMAL TAMULI

M/S LAKSHMI ENTERPRISES