Fabrication and erection of structural steel sheds for DG sets at DC Office (NIC) Kargil.

Amount

Excavation of trench by manual means for all kinds of soil for an average depth of 2’.0”, width 2’.6” and length upto 110’0” including disposal of the excavated earth and levelling & neatly dressing.

Excavation in trench for 3 Nos of foundation block by manual means with depth upto 1m, width 1.5 m 3.5 and disposal of the excavated earth and filling, levelling, compacting neatly excluding form work . all kind of soil

Providing, mixing, compacting & laying of Plum concrete M10 nominal mix Nallah aggregate 40 mm(1 cement , 3 coarse, 6 aggregate) using boulder not exceeding 150 mm @ 30% of the total volume, including cost of materials.

Providing, mixing, compacting & laying of plain concrete M15 nominal mix Nallah aggregate 20 mm(1 cement , 2 coarse, 4 aggregate), 3’.6” x1’x6”x 110’.0” including cost of materials, curing but not form works. The job also includes grouting of the specified size and number of structural steel columns by way of erecting , strutting, propping etc.

Form work (wall of any thickness) including centring, shuttering, strutting, propping etc.

Carriage of coarse & aggregate by MT lead up to 8 km

Carriage of boulders below 160 mm by MT lead upto 11km

Carriage of cement by MT lead upto 02 km

Carriage cement by MT lead up to 2km

Stone soling(100mm) including cost of stone 36’x20’ 6” 0- 17.22 sft

Cement concrete flooring in 1 : 2: 4 ratio (1 cement, 2 coarse, 34 aggregate), finished with floating coat of neat cement including cement slurry excluding cost nosing etc. complete job 50 thick 20 mm nominal size dry Nallah aggregate

Providing, mixing, compacting & laying of Plum concrete M10 nominal mix Nallah aggregate 40 mm(1 cement , 3 coarse, 6 aggregate)150 mm thick, using boulder not exceeding 150 mm @ 30% of the total volume, including cost of materials.

RCC work(any thickness), in M15 (1 cement, 2 coarse, 4 aggregate ) 20 mm Nallah aggregate, including, providing, mixing, laying and compacting, laying in position and curing excluding form work costs & cost of steel . 3.5m x1.5m x 1m x 3 Nos

Mild steel bar of medium tensile bars, including straightening, cutting, bending, binding and fixing in position vide drawing.

Providing, erecting, grouting in concrete of M15 mix, IS 100, I-sections, web 6 mm, flange thickness 10 mm 13’.0” x 6 =23.78 m vide drawing

Providing, erecting, grouting in concrete of M15 mix MCP 100, web 5mm, flange thickness 7.7 mm C-section , 13’.0” x 6 Nos = 23.78 m vide drawing

Providing, sizing, cutting, hoisting, fixing by way of welding of C-Channel MPC 100 web 5mm, flange thickness 7.7 mm beams including brackets, cleats etc. as per drawing details, 56.70 m

Providing, sizing, cutting and fixing by way of welding braces for the columns, 03 rows of equal span starting from the copping, IS 45x45x6x103

Fabrication & fixing by way of cutting welding , door frames 7’.0” x 3’.0” 02 No, out of IS 45 x45 x 6 = 12.19 m

Providing and fixing of pre fab steel doors of size vide item no 15x 02 nos including p/f of hinges, handles, locks & knobs etc and painting with one coat of primer and paint (synthetic enamel) of approved quality conforming to ISO/ISI standards . (3.9Sqm)

Providing & fixing of Corrugated G I sheets 0.63 mm (approved quality/brand conforming to ISO/ISI standards with zinc coating not less than 275gm/m2) vertically along all four sides with polymer coated J hooks, bolts and nuts, limpet washers, complete job

Providing/, hoisting and fixing in position of trusses, rafters, purlins, posts, etc. by way of welding 1. Rafters ( IS 75x75 x6)= 23’.0”x2 x 05 Nos= 70.12 m = 476.81 kg 2. Purlins (IS75x75x6) = 304 rft = 777.89 kg 3. Posts ( IS 75x75 x6) 8’.0’ + 5’.6” + 2’.8”+ 1’.6”= 17’.8”x 5 = 89 rft = 27.13m= 184.51 kg

Providing/fixing of 0.63 mm approved brand CGI sheets for roofing using polymer coated J/L hook bolts & nuts 8mm dia with bitumen and GI limpet washers including a coat of approved steel primer & 02 coats of approved steel paints with 12 inch overlap on all four sides. Pitch 60˚ (Complete job)

M/S FOURTEEN ENGINEERING WORKS

M/S HILL TOP STEEL FABRICATION

MS Kargil Engineering and Industries