Loading
Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.5 L
Closing Date
17 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: 1. Raising of Platforms to High Level and Provision of New 3m FOB at VNM, HAQ, SF & KMH - Electrical Arrangements., 2. Raising of Platforms to High Level at ANE, KQA, OBVP, NRE & PMT - Electrical Arrangements., 3. Provision of New 3m FOB at MMPL & BKPT - Electrical Arrangements. 4. Electrical Arrangements -Extension of Platform to hold 24/26 LHB Coaches at Proddatur and Jammalamadugu.
GTL-EM-87-2025-26
GTL-EM-87-2025-26
Open
Works - General
9 Months
Anantapur, Andhra Pradesh
₹0
₹5.5 L
17 Apr 2026
26 Mar 2026
3 Apr 2026
178 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,39,15,664.51 | ||
| — | Item Breakup for | details. | — | ||
| Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 62,65,397.6 | |
| — | Item Breakup for | details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq.mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 1,24,465 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant -Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 1,44,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of LED Street light fittings of 48 W with suitable driver with all connected materials as per attached Railway specification. (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) conforming to IEC 60598-1 or its latest amendments. | — | — | — | 19,52,850 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and termination of 2 core 70 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 or latest amendment with suitable lugs. | — | — | — | 6,10,508.8 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations. | — | — | — | 3,79,148 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 or latest amendments and with necessary lugs and terminations. | — | — | — | 19,31,512 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations. | — | — | — | 15,38,784 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 14,24,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 2,47,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 8 SWG GI wire with 40 GSM Zink coated, conforming to IS:280 - 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 2,44,800 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry, cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq.mm and all necessary accessories complete. | — | — | — | 1,43,370 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 340x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 240 sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements etc. | — | — | — | 26,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and connecting of 25x3mm GI Flat with 40 GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity. | — | — | — | 1,05,600 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of 50mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 with its latest amendments. | — | — | — | 95,160 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing and commissioning of Solar Standalone Street Light system(Model-III) including LED street Light= 36W, within-built Solar charge controller, 1 No SPV Panel=150Wp, 1 No GEL Battery =75 Ah, GI Tubular Pole 6M with MPPT (Maximum power point Tracker)with necessary arrangement for foundation as per specification attached. | — | — | — | 7,58,872.08 | |
| — | Item Breakup for | details. | — | ||
| Design, Fabrication, supply and fixing of 300mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable L- Clamps/G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc | — | — | — | 6,65,020 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 6,84,411 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 24,55,040 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.. .The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 38,293 | |
| — | Item Breakup for | details. | — | ||
| HT/LT Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ HDPE pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of1200 mm from ground level, it also includes insertion of pipe. | — | — | — | 1,07,850 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 11,960 | |
| — | Item Breakup for | details. | — | ||
| "Dismantling of Poles (tubular) / Rail Poles/ Octogonal pole and Handling Over to Store. " | — | — | — | 68,334 | |
| — | Item Breakup for | details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 1,48,175 | |
| — | Item Breakup for | details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 79,769.6 | |
| — | Item Breakup for | details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 1,68,025 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq.mm FRLS Cu. Conductor. | — | — | — | 21,600 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 2.5 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 2,40,720 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 7,700 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 12,510 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm FRLS, PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc...IS 694 (2010) with latest amendements. | — | — | — | 3,96,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 21,479.25 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 62,806.1 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 120W LED Flood light fitting as per attached railway specification with all connected materials complete. | — | — | — | 95,679.53 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected accessories as per attached railway specification. | — | — | — | 92,840 | |
| — | Item Breakup for | details. | — | ||
| Supply of LED Flood light fittings of 30W with suitable driver with all connected materials as per attached railway specification. | — | — | — | 34,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of 4 feet 20W LED tube light with Radar motion sensor. The fittings have to be fixed on the wall / Ceiling / FOB with suitable clamps. CCT 5700 K -6200 K Luminious flux : 1400-1600 Lpm , Input Voltage : 100-240 V , 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs , BEAM angle :180, CRI>71. Ingrees protection: IP20, base : Aluminium alloy housing cover : Forged , PVC lamp holder : PC /ABS , Action distance : phase 3 to 6 m .Suitable Box type fittings for LED lamps has to be supplied by the contractor.Make : Nano, Bright solar, ECP lighting solutions, Procorp earntech pvt ltd, solar innovation & system. LED make as per attached railway specification | — | — | — | 2,11,854 | |
| — | Item Breakup for | details. | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as per IS 3854:1997 with its latest amendments) (ii) 3 x International Socket 13/6 Amps (iii)1 x 16A SP MCB (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting, (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 16,215 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at staions made stainless steel (2 mm thick)material with dimension 24cm*22cm* 4cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 6,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU. | — | — | — | 20,808 | |
| — | Item Breakup for | details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 34,956 | |
| — | Item Breakup for | details. | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make with all connecting accessories complete. | — | — | — | 23,328 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40 A Electromechanical DP RCBO 30 mA sensitivity in accordance with IS 12640-2(2008) or latest with necessary connections and all accessores complete. | — | — | — | 37,472.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 7,360 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 7,360 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments with all connected accessories. | — | — | — | 25,760 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), SemiElliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 4,41,985.35 | |
| — | Item Breakup for | details. | — | ||
| — | Item Breakup for | details. | — | ||
| — | Item Breakup for | details. | — | ||
| — | — | — | 24,548 | ||
| — | Item Breakup for | details. | — | ||
| — | — | — | 76,471.2 | ||
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Salt | — | — | — | 52,880.8 | |
| Provision of RCC earth pit hollow box of size300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor. It includes fixing of earth pits at various locations. Inspection by Consignee. | — | — | — | 1,32,218.72 | |
| Transportation charges including loading &unloading of earthing arrangements systemmaterial to site / location | — | — | — | 37,779.6 | |
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. (RITES only for Earth Electrode) | — | — | — | 7,87,215 | |
| — | — | — | 34,38,331.6 | ||
| — | Item Breakup for | details. | — | ||
| Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 12,86,152 | |
| — | Item Breakup for | details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq.mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 25,550 | |
| — | Item Breakup for | details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofLikelySuppliers_1.pdf
ATTACHMENT
JPO Digging of Cable
ATTACHMENT
Signages_Standard_Sizes-1-42.pdf
ATTACHMENT
Signages_Standard_Sizes-43-75.pdf
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
SolarStreetlight-1-20.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-87-2025-26.pdf
ATTACHMENT
EarthingSpecificationMFEand.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .