Provision of Extending Additional 1 Floor of Existing 1 No 26 person Bed-cum Passenger Lift and Power main to District Integrated Public Health Laboratory over the First Floor of Existing 48 Bedded ward Building in District Head quarters Government

Removal of existing 26 persons bed cum passengers lift components completely from Ground floor to First floor in the existing 48 Bedded building and Re-installation of the lift after civil works completion with extension for one floors(Second floor) materials along with removed existing lift components completely ensuring the following specifications:Design, Engineering, Fabrication, Erection, Testing, Commissioning and Handing over of 1No 26 Persons Bed Cum Passenger Lift as per following technical specifications which includes all taxes and duties.(with Machine room) 1.Location: 48 Bedded Building in District Head Quarters Government Hospital at Thirupathur in Thirupathur District. 2.No of lift: one no. (Gearless) 3.Type of lift: Bed-Cum passenger 4.Capacity of lift: 26 persons /1768 Kgs 5.Speed: 0.32m / sec 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions 7.No of floors: GF+2 Floor 8.Total travel: 3.6mts x 3 Landing =10.8 mts 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping 10. Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling. 11. Position of machine: directly above the lift well. 12. No of landing service: One in the front side- 1 no. 13. No. of car entrance: one in the front side only 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings. 16.Lift well :2320 mm (wide) X 2950 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing 17.Lift pit depth:1600 mm 18. Car inner size: 1600 mm ( width ) x 2400 mm (depth) as per IS 14665 (part 1) 2000, over head 4200 mm and Total weight of person – 680 Kg. 19. Car clear opening: 1200 mm wide x 2000 mm height as per IS 14665 (part 1)2000 20.Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light. 22.Control: micro computer (micro processor):based simplex collective control with / without attendant 23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan. 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing. 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device 27.Emergency light: battery operated light to be provided with automatic charging device 28.Fire mans switch: to be provided at the GF 29. Minor builder works: to be provided by the lift contractor. 30. Scaffoldings: to be provided by the lift contractor. 31. Sill angles and facia plates: SS to be provided by the lift contractor. 32. Steel for lift machinery: to be provided by the lift contractor. 33. Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor. 34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35. Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor 37. Floor position announcer: to be provided by the lift contractor. 38.Special features a) Infra red door sensor with full height screen b) Full width half height rear panel mirror c)Tubular SS hand rail in car d) Stainless steel signal features e) Vandal proof SS button with SS cover f) SS door frames for landing doors g) V3F door operator h) Call register signal i) Stainless steel facia plates for car operating panel and landing fixtures j) Steel ladder for lift machine room k) On / off switch for fan and light l) Over load warning indicator with audio announcer m)Voltage stabilizer for control circuits n)Braille button 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries 40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Total

GST @ 18%