Providing Sewage Treatment Plant 0.15 MLD Capacity for the Setting up of High Security Prison at SURIYUR VILLAGE THIRUVERUMBUR TALUK in Trichy District

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

c) 3 to 4 mt.

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

C0042) Providing and laying in position, Standardised Concrete Mix M-30 Grade a) In Foundation and Basement

b) In Ground Floor

B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement

B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Stilt / Ground Floor

b) In First Floor

B0062) Brick partition walls in cement mortar 1:4, 70mm thick using fly ash bricks of size 23x11x7cm with admixture a) In Ground Floor

JW0030) Manufacturing and supplying of Steel Windows (Weight basis)

J0017) Supplying and fixing of 4mm thick pin headed Glass panels

MS0047) Supplying and fixing of push and pull type steel Rolling shutters (Manually Operated) (upto 8 Sqm area)

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0001) Supplying and filling in foundation and basement with filling crushed stone sand

F0013) Supply and filling in foundation and basement with gravel (including Tax collected by Govt. Per Cum)

FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

RE0009.a) Applying of anticorrosive treatment on steel reinforcement rods

PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

CS0037) Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20 I. 20mm thick a) In Ground Floor

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick b) In Ground Floor

EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0070) Supplying and fixing of 9 watts LED bulb

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

C0013) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete a) Providing Pit

b) Augering 30cm dia

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0001) White washing three coats using clean shell lime slaked

SA0073) Supply & fixing of CI Steps (not less then 5 Kg each)

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable a) 3.5 core 120 Sqmm PVC aluminium armoured LTUG cable

EL0341) Labour charges for fixing of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level

EL0338.a) Labour charges for laying of PVC Aluminium Armoured LTUG cable excluding Civil works Below Ground level

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 120 Sqmm Brass cable gland

EL0344) Supply and providing cable end termination of following PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 3.5 core of 120 Sqmm PVC Armoured ALTUG cable end termination

WS0016) Supply and laying of following dia G.I pipes Below ground level a) 100mm dia GI Pipe

WS0015) Supply and fixing of following dia G.I pipes Above ground level a) 100mm dia GI Pipe

WS0018) Supply and fixing of following dia GI Special of best approved quality, with ISI mark a) 100mm dia GI Bend

b) 100mm dia GI Coupling

EL0242.b) Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection

SA0104) Supply & Installation of STP - Collection & EQT water transfer Submersible Cutter pump with Motor, Type-Cutter, Model JDS, discharge size : 50NB, Head: 10 Meter, Flow : 7.5 Kl/hr, Electrical panel: 1 HP / 3 Phase, Make: CNP/ KSB/Eqvt.

SA0104.a) Supply and Fixing of Air blower, Capacity-200 M3 / hr , Pressure-0.4 Kg/cm2

SA0104.b) Supply & Installation of Blower Motor, Electrical - RPM 1500, 5.5 HP, 3 Phase with Control panel Make Kirloskar / Crompton.

SA0104.c) Supply and Installation of Fine Membrane diffuser, Size: 90mm diax1.0m Long with retrievable system, MOC: EPDM with inter connecting fitting

SA0104.d) Supply and Installation of Coarse Membrane diffuser, Size: 80mm diax1.0m Long with retrievable system, MOC: EPDM with inter connecting fitting

SA0104.e) Supply and Installation Secondary Clarifier Mechanism, Size: 3.0 Meter dia x 3.5 Meter center shaft with scabber Mechanisms, Gear box with Motor, Electrical -1.0 HP, 3 phase, Control Panel providing MSEP Support platform and MS Shaft, scrubber with Internal Accessories

SA0104.f) Supply & Installation of Filter Feed pump with Motor, Type-Monobloc non clog, discharge size : 50 NB, Head: 35Meter, Flow : 7.5 Kl/hr

SA0104.g) Supply and Fixing of Pressure Sand Filter (PSF), Size: 800mm dia x 2000mm Height on straight (HOS) x 6mm Thick

SA0104.h) Supply and Fixing of Activated carbon Filter (ACF), Size: 800mm dia x 2000mm Height on straight (HOS) x 6mm Thick

SA0104.i) Supply & Installation of Chlorine dosing pump, Capacity- 6 LPH @ 4 Kg/cm2

SA0104.j) Supply & Installation of STP - Sludge recirculation Pump with Motor, Type-Monobloc non clog

SA0104.k) Supply & Installation of STP – Treated water transfer pump with Motor Type - monobloc non clog

EL0493) Supplying and laying of 3.5 core 90 Sqmm Aluminum Cable

EL0493.a) Supplying and laying of 4 core 4 Sqmm copper Cable

EL0493.b) Supplying and laying of 4 core 2.5 Sqmm copper Cable

EL0493.c) Supplying and laying of 2 core 1.5 Sqmm Aluminum Cable

SA0122) Supplying, laying and including labour charges for fixing the UPVC Pipes for Interconnecting all equipment from equalization tank to final treated water tank with necessary fitting a) 50mm dia UPVC Pipe

b) 40mm dia UPVC Pipe

SA0192) Supplying and fixing of following dia UPVC Valve with necessary fitting a) 50mm dia UPVC Valve

b) 40mm dia UPVC Valve

WS0010) Supplying and fixing of following dia CPVC Valve with necessary fitting a) 50mm dia CPVC Pipe with fitting

b) 25mm dia CPVC Pipe with fitting

c) 25mm dia CPVC valve with fittings

WS0023.k) Supplying and fixing of following dia WAFER TYPE NON-RETURN VALVE with necessary fittings etc., a) 75mm dia Valve

WS0023.l) Supplying and fixing of following dia WAFER TYPE NON-RETURN VALVE with necessary fittings etc., (a) 50mm dia Valve

WS0023.m) Supplying and fixing of following dia WAFER TYPE NON-RETURN VALVE with necessary fittings etc., (a) 40mm dia Valve

WS0023.n) Supplying and fixing of following dia MS Puddle Pipes with necessary fittings etc., (a). 100mm dia pipe

WS0023.o) Supplying and fixing of following dia POLYPROPELENE (P.P) FOOT VALVE with necessary fitting etc., a) 50mm dia valve

b) 75mm dia valve

SA0083) Supply of MBBR Media for aeration tank

EL0428) Supplying and delivery electrical panel board for the STP with all internal wiring to all starters

SA0109) Erection and commissioning of STP of 0.15 MLD capacity including Erection of all mechanical equipments, control devices with necessary tools and tackles and Initial chemicals.

SA0106) Supply of initial startup chemicals

Please Enable Macros to View BoQ information