Construction of Bitumin road and drain near Ramleela ground to Steesh bhatiya and sardar in Moh Adarsh colony ward no-2 Rampur

Providing & Applying of Primer Coat of low porosity with Bitumen emulsion on prepried surface of granular base i/c Cleaning surface of road and Spraying primer at rate od 0.70 kg/sqm using mechanical means

Proving laying and Rolling of open grade premix carpet of 20mm thickness composed of 13.2mm to 5.60mm aggregates using VG-10 to required line, grade and level to serve as wearing course on a previously prepared base by manual means laying Rolling with a three wheel 80-100 kN static roller capacity finished to required level and grade as per technical specification clause 508

Providing and applying tack coat with bitumen emulsion pressure distributor at the rate of 0.25 kg per Sqm on the prepared bituminous /granular surface cleaned with mechanical broom including cleaning of road surface and spreying primer @ 0.75 kg/Sqm using mechanical means incuding cost of all material labour and T & P etc required for proper completion of work

Providing & laying of type C Seal coat by manual means with VG-10 sealing the voids in bituminous surface laid to the specified level grade and Cross fall as per technical specification clause…

Cement Concrete with 4cm gauge approved Stone ballast coarse sand and cement in proporation of 12:6:1 inculuding supply of all materail labour and T&P etc.required for proper completion.

M-150 brick work in 1:4 with one cement and four course sand mortar in foundation and plinth (Substructure) inculuding supply of all meterials,labour and T&P etc.reuired for proper complete of work.

12mm thick plaster in 1:4 with one part cement and four part of approved coarse sand mortar including supply of all material, labour and T&P etc. required for proper completion of work.

Cement Concrete with 4cm gauge approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2 cm gauge stone grit instead of 4cm gauge stone ballast including supply of all materials labour and T&P etc for proper completion of work.

R.C.C. work with cement approved coarse sand and 4cm gauge approved grit in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and lits bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. supply of all material, labour and T&P etc. required for proper completion of work binding wire of supplied bu the contractor free of cost.

supplying, fitting and placing un-coated HYSD bar Reinfrcement in foundation complete as per Drawing and Technical Specifications complete as per MORTH IInd Revision 2019 Specification 1600.

Supply & fixing innaurgation stone board including supply of all materials labour and T&P etc for proper completion of work.

Add Say amount

Please Enable Macros to View BoQ information