Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹26.0 LAdmitted-Fee/PreQual/Technical/Finance KAMAL NAGAR MOHARCHERRA KALYANPUR KHOWAI TRIPURA | KALYANPUR | KHOWAI | TRIPURA | +7.07% | ₹26.0 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹28.0 L+₹2.1 L (7.92%)Admitted-Fee/PreQual/Technical/Finance AMARPUR GOMATI DISTRICT TRIPURA | +15.55% | ₹28.0 L+₹2.1 L (7.92%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹24.2 L
EMD Value
₹48,485
Closing Date
11 Aug 2026, 3:00 pmClosed
The Executive Engineer, Teliamura Division
O/O the Executive Engineer, Teliamura Division
Mtc. of road from (i) Bagajatin Club (TK road) to Gopal nagar (L-0.44 Km.), (ii) TK Road to Gopal Nagar via Ramkrishna Ashram (L-0.32 Km.) under Kalyanpur Sub-Division PWD(RandB)/SH- CC road, Protection Work at ch-0.35 km etc. during the year 2026-27
2026_CEPWD_75319_1
21/EE/TLM/PWD(RandB)/2026-27.
Open Tender
Civil Works - Roads
Percentage
90 days
Kalyanpur
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,000
₹48,485
11 Aug 2026
3 Aug 2026
11 Aug 2026
3 Aug 2026
11 Aug 2026
3 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for Structures
Without dewatering.
Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
Ordinary Soil
Upto 3 m depth | - | Cum | 458.2 | - |
| 2 | Filling in Foundation trenches as per drawing & MoRD technical specification clause 305.3.9,1200.
Sand Filling | 1 | Cum | 1,379.6 | ₹1,378.22 |
| 3 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement)
P.C.C grade M 10 ( Using Jhama Brick Aggregate )
Nominal mix 1 : 3 : 6 | 1 | Cum | 9,492.21 | ₹9,482.72 |
| 4 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement)
RCC grade M25
Upto 5m height | 1 | cum | 13,000.62 | ₹12,987.62 |
| 5 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202. | 1 | T | 91,869.49 | ₹91,777.62 |
| 6 | Plastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204. | - | Sqm | 231.5 | - |
| 7 | Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8 | - | Cum | 4,882.3 | - |
| 8 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. | - | mtr | 392.2 | - |
| 9 | Manufacturing & supplying of machine made PVC wire crates chain link type made by S.W.G PVC wire bearing 12/10 SW. GI wire inside the PVC wire, size of cage 1500 mm. X 600 mm. X 450 mm. having square mesh of 80mm. X 80mm. including carrying to the work site as per direction of the Engineer-in charge (Weight of each cage shall not be less than 7.80 kg) | - | kg | 202 | - |
| 10 | Supplying and stacking mixed class brick bats (50% first class & 50% un-class) including carriage loading & unloading at the site of work complete as per direction of the Engineer-in-charge | - | Cum | 3,420.92 | - |
stage.html
html • 0.02 MB
finance_76677.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.86 MB
BOQ_76677.xls
BOQ • 0.32 MB
DNIeT21EE.pdf
Tender Documents • 2.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .