Removing Debris / Silt From Existing Strom water drainage Line By CCTV Camera With Super Sucker Machine and All Equipments at F.P.37 to Ring Road, Girivar Pride to gajuna cross road to gurudvara and other existing storm water lines in Odhav ward East Zone.(ARC)

BILL OF QUANTITIES (PRICE BID)

DATE OF Dt. 05-03-2026 Up to

TENDER DOCUMENT ONLINE. .

Last of Date of Submission of

Tender Fees, EMD & Other

documents in hard copy at AMC - Dt. 06-03-2026 Up to

office by Speed Post or 16.00 hours.

Registered Post AD or Courier

Date of Tender Opening at 17.00 hours

AHMEDABAD MUNICIPAL CORPORATION

BIDDING DOCUMENTS FOR PERCENTAGE RATE CONTRACT

SECTION DESCRIPTION PAGE NUMBERS

E1 GENERAL INSTRUCTIONS 4-6

E2 BILL OF QUANTITIES 7-10

AHMEDABAD MUNICIPAL CORPORATION

BILL OF QUANTITIES

A. General Instruction for the BOQ

1. This is tender invited for Percentage Rates contract.

2. The Bill of Quantities shall be reading conjunction with the Instruction to Bidders,

Conditions of Contract, Technical Specifications.

3. The bidder must have visited and examined the area of the Works and its

surroundings and obtained all data and it is his own responsibility. All information

that may be necessary for preparing the bid and entering into a contract for this

type of Works. The costs of visiting the Site shall be at the bidder's own expense.

4. Bidder must have knowledge of existing sewage flow quantity or he must have got

data of sewage flow quantity in the sewerage trunk main lines or Branch sewer

lines and he must have aware of required pumping for diversion of the existing

flow. Bidder shall have to maintain flow level in all manhole of upstream line during

diversion of flow by proper pumping system. In this regard bidder shall have to

divert the flow in same line by alternate manhole distance if there is no extra

line and he shall not raise any issue of extra line for diversion of the flow.

5. The bidder and any of its personnel or agents will be granted permission by the

Employer to enter its premises and lands for the purpose of such inspection, but

only upon the express condition that the bidder, its personnel and agents, will

release and indemnify the Employer and its personnel and agents from and

against all liability in respect thereof and will be responsible for death or personal

injury, loss of or damage to property and any other loss, damage, costs and

expenses incurred as a result of the inspection.

6. No claim in future for unknown with the site by the bidder shall be granted in any

7. Bidder shall quote the rate for each item considering his profit accordingly. AMC

may execute any item of the BOQ too less or too more in any occasion. Therefore

bidder shall not raise any claim for non executing item or too more executing items

or too less executing item.

8. The basis of payment will be the actual quantities of work executed and carried

out, as measured by the Contractor and verified by the Engineer and valued at the

rates and prices bid in the priced Bill of Quantities, where applicable, and

otherwise at such rates and prices as the Engineer may fix within the terms of the

Contract. Contractor shall not raise any claim for too less or too more

quantities executed by him. Quantity may vary with respect to BOQ as well

as place of work also may change cited in the tender.AMC will execute this

contract subject to availability of the fund. If, fund is not available then AMC

may cancel this tender. Contractor shall not raise any claim in future for this.

9. The rates in the Bill of Quantities, except in so far as it is otherwise, provided under

the Contract, include all constructional plant, labour, supervisions, materials, all

temporary works and false works, erection, maintenance, establishment and

overhead charges, profit, any taxation and levies, octroi and other charges

together with all general risks, liabilities and obligations set out or implied in the

Contract and including remedy of any defects during the Defects Liability Period.

10. Bidder shall fill percentage rate on amount of BOQ which is entirely in India Rupee

11. Bidder is requested to fill rate on total cost of the BOQ considering the

AMC shall evaluate bidders capability to work considering work on hand

and work in progress in all parts of India. AMC shall evaluate bidder`s

capability of doing the work considering working progress and response to

the instructions delivered from AMC engineers and authority to him.

(Note: If any quarry in this clause bidder shall clarify / may contact before entering

in to the contract.)

12. Bidder shall fill percentage rate on amount of BOQ irrespective of the quantity

against the Items (for which rate has been provided). Items other than in the BOQ

will be paid for by the Employer on actual measurement (preferably current SOR of

any organization) onsite if executed.

13. This work is for whole East Zone Bidder must have knowledge of existing sewage

flow quantity or he must have got data of sewage flow quantity in the sewerage

trunk main lines or Branch sewer lines and he must have aware of required

pumping for diversion of the existing flow. Bidder shall have to maintain flow level

in all manhole of upstream line during diversion of flow by proper pumping system.

In this regard bidder shall have to divert the flow in same line by alternate manhole

distance if there is no extra line and he shall not raise any issue of extra line for

diversion of the flow.

14. AMC will have to give the instruction to start the work all together for more than

one places in areas of the zone. For that he should have minimum Two Super

Sucker machine and Three silt carrying tanker Owned by himself only.

15. The bidder and any of its personnel or agents will be granted permission by the

Employer to enter its premises and lands for the purpose of such inspection, but

only upon the express condition that the bidder, its personnel and agents, will

release and indemnify the Employer and its personnel and agents from and

against all liability in respect thereof and will be responsible for death or personal

injury, loss of or damage to property and any other loss, damage, costs and

expenses incurred as a result of the inspection.

16. The contractor should have to attend the breakdown if any as early as possible

and should have to complete the work without unavoidable delay.

17. Contractor shall have to provide experienced operator and workers on hiring of

super sucker on shift bases.

18. In case of Accident or death of Employer’s of Contractor or third party, A.M.C. will

not be Responsible in any manner / Manners.

19. In case of damage of machines due to Accident, AMC will not be responsible.

20. In any case, contractor is not allowed to work inside the manhole or sewer lines.

21. The operator and workers shall be Contractor’s employees. Corporation staff (

Tech.Supervisor/ Engineers) will show only the site where the work is to be carried

22. Payment will be made after getting satisfactory working report from the user

23. The whole cost of complying with the provisions of the Contract shall be deemed to

have been included in the items provided in the priced Bill of Quantities.

(a) General directions and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. Reference to the relevant

sections of the contract documentation shall be made before quoting the bid.

(b) The method of measurement of completed work for payment shall be in

accordance with the requirement as stated in the individual sections of the

Technical Specifications.

(c) Contractor shall credit the material dismantled during the work in progress in

AMC store suggested by Engineer in charge of the work.

(d) AMC reserves the right to increase or decrease the scope of work or to incase

of any condition. AMC may start it after approval of competent authority.

Detailed technical specification for all the Items above shall be relevant to PWD manual

general material specification there in during the construction period of the contract.

Contractor should adhere to the specifications and same shall be considered as the

tender document.

Incase of any discrepancy the decision of engineer in-charge shall be considered as final.

In case of any dispute the decision of City Engineer shall be considered as final.

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT (EAST ZONE)

NAME OF WORK :-Removing Debris / Silt From Existing Strom water drainage Line By CCTV

Camera With Super Sucker Machine and All Equipments at F.P.37 to Ring Road, Girivar Pride to

gajuna cross road to gurudvara and other existing storm water line’s in Odhav ward East

Item / Description Qty Rate Unit Total

1 Temporary / Permanent Plugging for blocking of

sewer line, branch connections and diversion of

flows and removal of all plugs by any means etc.

comp. as directed by Engineer In Charge of the

(J) 1800 mm dia to 2200mm Dia 5 7500.00 No.

(K) RCC Duct of any size 5 8000.00 No.

2 Provide everything else required for diversion of flow

by pumping and / or bypassing and to maintain the

sewerage system functioning normal and managing

the flow without any sur-charging, overflows etc

during the De-silting/ rehabilitation

works of the sewer line to the satisfaction of the

Engineer in charge of the work.

(A) 300 mm dia 500 100.00 RMT

(B) 450 mm dia 1000 150.00 RMT

(C) 600 mm dia 2000 250.00 RMT

(D) 800 mm dia 320 300.00 RMT

(E) 900 mm dia 5 450.00 RMT

(F) 1000 mm dia 5 475.00 RMT

(G) 1200 mm dia 5 510.00 RMT

(H) 1400 mm dia 5 800.00 RMT

(I) 1600 mm dia 5 1000.00 RMT

(J) 1800 mm dia to 2200mm Dia 5 1100.00 RMT

(K) RCC Duct of any size 50 1200.00 No.

3 Loosen, de-silt and thoroughly clean and remove

debris and objects such as boulders, bricks etc,

bacteriological slimes, roots, encrustations, grease,

carbonated deposits, etc from the sewer line

including disposal of silt / debris / malba / objects

etc, including solidification of silt/malba/debris for

disposal to the dumping sites as per the direction of

the Engineer - in - charge.

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 250 1230.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 984.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 615.00 RMT

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 500 1815.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 1452.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 907.00 RMT

(i) ( For Above 80% silted line) 100 % AS / TENDER

RATE 2460.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 1968.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 1230.00 RMT

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 160 3280.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 2624.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 1640.00 RMT

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 5 3700.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 2960.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 1850.00 RMT

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 5 4450.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 3560.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 2225.00 RMT

(G) 1200 mm dia

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 5 5040.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS /

TENDER RATE 4032.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 2520.00 RMT

(H) 1400 mm dia

(i) ( For Above 80% silted line) 100 % AS / TENDER

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

/ TENDER RATE 4704.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 2940.00 RMT

(I) 1600 mm dia

(i) ( For Above 80% silted line) 100 % AS / TENDER

RATE 6720.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS /

TENDER RATE 5376.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/ TENDER RATE 3360.00 RMT

(J) 1800 mm dia to 2200mm Dia

(i) ( For Above 80% silted line) 100 % AS / TENDER

RATE 7560.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

AS/TENDER RATE 3780.00 RMT

(K) RCC Duct of any size

(i) ( For Above 80% silted line) 100 % AS / TENDER RATE 25 8000.00 RMT

(ii) ( For 80% to 50 % Drainage silted line) 80 % AS/

TENDER RATE 6400.00 RMT

(iii) ( For Less than 50% to 30 % Dr.silted line) 50 %

4 Post-desilting colour CCTV/ Photographic survey

including pan and Zoom inspection of laterals and

defects and submission of video tapes or CD

inclusive of colour photographs to the Engineer in

(B) 450mm dia 1000 250.00 RMT

(C) 600mm dia 2000 250.00 RMT

(D) 800mm dia 320 250.00 RMT

(E) 900mm dia 5 250.00 RMT

(F) 1000mm dia 5 250.00 RMT

(G) 1200 mm dia 5 250.00 RMT

(H) 1400 mm dia 5 250.00 RMT

(I) 1600 mm dia 5 250.00 RMT

(J) 1800 mm dia to 2200mm Dia 5 250.00 RMT

(K) RCC Duct of any size 50 250.00 RMT

5 Tracking of old Manhole 12.00 1202.00 No

6 Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregates of any kind executed outside the road

site. Rate also includes spreading & levelling etc 50.00 52.42 CMt

complete. Internal conveyance above 50 mt done within

the work site is not payable. (e) Lead From 4 Km to

7 Dewatering by pumping set of required capacity

including temporary platform carting pumping at site

and fixing the same in position including all accessories, 500.00 18.32 HP/hr.

and fuel and labour etc. complete.

8 Providing and laying controlled cement concrete M.200

for curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in Slabs, 1.00 4460.36 CMt

landing, shelves, Balconies Lintels, Beams, Girders and

Cantilever upto floor two level.

9 Providing TMT Bar FE 415 reinforcement for R.C.C. work

including bending, binding and placing in position 20.00 66.59 Kg.

complete up to floor two level (up to 10 ton)

10 Providing form work in ordinary timber planking so as

to give a rough finish including centering, shuttering,

strutting and propping etc. height of propping and

centering below supporting floor to celling not

exceeding 4 M & removal of the same for in situ

reinforced or plain concrete work upto floor four level

Foundation, footings, bases of columns etc. and mass

concrete. 25.00 171.68 Smt

11 Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./ Sq.Cm.in

foundation and plinth in Cement Mortar1:6 (1- Cement

: 6 - fine sand)

(A) Conventional (upto 10 ton) 5.00 3981.21 Cmt

12 Providing and fixing M.S. grills , gate, stair/ balcony

railling, elevation element of decorative pattern with

M.S. channel, flat, Medium grade m.s.pipe, square or 69.00 100.17 kg

round bars with round headed bolts, nuts, or by screw

13 Providing 15 mm thick cement plaster in single

coat on Rough (Similar) side of single or half brick walls

for interior plastering up to floor two level and 19.00 174.83 Sqm

finished even and smooth in (i) Cement mortar 1:3

(1-cement :3-sand)

14 Demolition including stacking of serviceable

materilas and disposal of unserviceable materials with 1.00 1047.38 Ctm

all lead and lift. (i) R.C.C. work

15 Demolition of Brick work and stone masonry including

stacking of serviceable material as and disposal of

unserviceable materials with all lead and lift.(ii) In 3.00 544.95 Ctm

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation