Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-Finance P 263 56 BENARAS ROAD HOWRAH 711108 | HOWRAH | HOWRAH | WEST BENGAL | 711108 | ₹4.1 L | L1 | Accepted-Finance L1 Bidder |
| 2 | L2₹4.2 LAccepted-Finance | ₹4.2 L | L2 | Accepted-Finance L2 Bidder |
| 3 | L3₹4.2 LRejected-Finance DHALTITHA BASIRHAT PIN 743412 | BASIRHAT | NORTH 24 PARGANAS | WEST BENGAL | 743412 | ₹4.2 L | L3 | Rejected-Finance L3 Bidder |
| 4 | Rejected-Technical VILL UTTAR BAGUNDI P O GOTRA P S BASIRHAT DIST NORTH 24 PARGANAS PIN 743422 | BASIRHAT | NORTH 24 PARGANAS | WEST BENGAL | 743422 | - | - | Rejected-Technical Technically not qualified due to insufficient documents. |
Tender Value
₹4.1 L
EMD Value
₹8,250
Closing Date
28 Jul 2026, 1:00 pmClosed
Refer NIeT
Refer NIeT
Special Emergency Repairing of Rising Main near The Barasat-I BDO office, Nilganj more, In front of Boyra Madrasha, Jafarpur kabar sthan and other ancillary work under North 24 Pgs. Water Supply Division-I, P.H.E. Dte.
2026_PHED_1032911_2
WBPHED/1e/AE(HQ-I)/NWSD1/26-27
Open Tender
CIVIL WORKS
Percentage
15 days
Refer NIeT
Please refer Tender documents.
2 documents required · 2 mandatory
₹8,250
10 Aug 2026
17 Jul 2026
30 Jul 2026
17 Jul 2026
28 Jul 2026
17 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1500 mm. | 61.88 | Cum | 119.27 | ₹7,380.43 |
| 1.1 | (b)Depth of excavation foradditional depthbeyond 1500mm. and upto 3,000mm. | 42.06 | Cum | 192.38 | ₹8,091.5 |
| 2 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness
12mm.
NB Diameter in mm
a) 200 mm Dia. | 1 | Each | 924 | ₹924 |
| 3 | Supply of M.S. blank Flange as per IS-6392 TABLE 20 Thickness 12mm
NB Diameter in mm
a) 200 mm Dia. | 1 | Each | 1,385 | ₹1,385 |
| 4 | Supplying, fabricating & delivery of internal diameter M.S. pipe of TATA/SAIL/Approved make ( Spirally welded ) as per IS: 3589-2001 of as amended to be delivery at site inclusive of all duties, taxes charges and cost of transportaiton, loadinf & unloading & stacking all complete at lifting and destination point all complete as per direction of EIC.
i) 600mm dia (ID) 8.00mm thk. MS pipe. | 2.5 | Mtr. | 9,724.74 | ₹24,311.85 |
| 4.1 | ii) 200mm dia (ID) 8.00mm thk. MS pipe. | 1 | Mtr. | 3,347.86 | ₹3,347.86 |
| 5 | Derusting, brushing, cleaning and smoothening throughly the inner surface of spirally welded mild steel and specials by sand blasting to SA-1 SWEDISH specification and immediately after sand blusting applying protection coating (reasistant to corrosion and contamination of dinking water) of Drinkon Alluminium Primer two coats, DFT (40-50) microns each coat of salimer paints limited or equivalant by spray painting in the inner surface of pipes as per manufacturers specification, all complete with supply of requisite materials, labour consumable etc. including staking of coated pipes properly as per specifiction, direction and satisfection of EIC. | 0.81 | Sqm. | 287.34 | ₹232.75 |
| 6 | Derusting, brushing, cleaning and smoothening throughly the outer surface of spirally welded mild steel and specials by sand blasting to SA-2 1/2 SWEDISH specification immediatel;y after sand blusting applying one coat of fast drying synthetic primer and their after applying coating and wrappling to the pipes (already coated with primer) as per IS: 10221/ thermofusion process by ter based polymeric corrosion protection tape as per IS:10221 specification consisting of 3 layers of polymeric mix 1 layer of fiber glass matte and 3 layer of HMHDPE flim all calendered to gather to form the 4 mm thick tape minimum overlap to be maintained for pipe 8.0 mm and for welding joinins 50 mm on both side of the welid immediete after the raping coating is complete a final coat of wightwash with water based cement paint is to be done over the entire coated pipe as per specifiction and direction of EIC ioncluding the cost of labour and materials all complete. (Payment will be maid on the finished net area only) | 0.85 | Sqm. | 757.08 | ₹643.52 |
| 7 | Making flange joint toDI/CI pipes, specials and valves where necessary with supplyof required rubber insertion and nut bolts, washers etc. Of approved quality and type all complete as perspecification and direction of EIC (Nut and bolts shall be of TATA/GKW rate).
(a) 200mm Dia. | 2 | Each | 237 | ₹474 |
| 8 | Supplying bolts with nuts matching with different dia. C.I. detachable joint as per IS : 8794 - 1988 with latest amendment.
a) 10 to 25 mm. dia. | 45.5 | K.g. | 119 | ₹5,414.5 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.99 MB
BOQ_2536773.xls
BOQ • 0.32 MB
ANNEXURE_WBF2911.pdf
Tender Documents • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].