REPAIRS TO BOUNDARY WALL, FENCING GATE, AREA DRAINAGE, SAUCER DRAIN AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Demolition of cement concrete (Reinforced) of any description in any position complete all as specified.

Demolition of precast concrete block/brick walling built in cement mortar of any description etc complete all as specified.

Demolition of cement concrete (un-Reinforced) of any description in any position complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified.

Dismantling of chain link fencing work of any description complete all as specified.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified.

Surface dressing not exceeding 15 cm deep in soft/ loose soil complete all as specified.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed complete all as specified.`

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors/gate, ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L for providing reinforced cement concrete (1:1.5:3) type A1, (using 20 mm graded crushed stone aggregate) as in Precast posts, fencing posts, straining or terminal posts, struts etc, for fencing average sectional area exceeding 100 Sq. Cm an and n.exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops including use and waste of formwork as directed and fixed complete all as specified.

Supply only chain link fencing of mesh size 75 x 75 mm with weight not less than 2.5 Kg/Sqm complete all as specified

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails straining bolts, etc complete all as specified

S&F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., complete all as specified

S&F 10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified.

S&F mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete all as specified.

M&L for preparation of new steel surfaces exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new steel surfaces n.exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for providing cement concrete (1:2:4) type B-0 (using 12.5 mm size graded crushed stone aggregate) as in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified. .

M&L for cement concrete (1:3:6) type C2 using (using 40mm graded crushed stone aggregate) as in foundation filling and mass concerete complete all as specified

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified.

M&L for reinforced cement concrete (1:1.5:3) type A1, nominal mix (using 20mm graded crushed stone aggregate) as in slab, landings, balconies, canopies, deck slabs and in shelves complete all as specified.

M&L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified

M&L for brick work with sub class B bricks laid on edge on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified

M&L for brick work with sub class B bricks laid flat on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified

Use and waste of formwork to flat rough finished surface of concrete, as in soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified

M&L for rendering 15 mm thick cement plaster in cement mortar 1:6 on fair fair faces of brickwork or concrete surfaces complete all as specified

M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified.

Material and labour for applying two coats of weather shield paint complete including prepration preparation of newely plastered or unplastered surfaces of wall, chujja, facia etc complete all as specified

R K AGARWAL (BID ID -3499824)

Samir Kumar Dey (BID ID -3499745)

M/S SHIVNATH SINGH (BID ID -3498939)

M/S PLABAN KUMAR GOPE (BID ID -3499143)

M/s D J Ghosh (BID ID -3499536)