CERTAIN REPAIRS TO LT UG CABLES, LT PANEL (INDOOR/OUTDOOR), EXTERNAL SERVICES CONNECTIONS AND OTHER CONNECTED WORKS IN DOMESTIC AND TECH AREA AT 3 BRD AF UNDER GE (AF) MC CHANDIGARH

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre in depth and not exceeding 1.5 metre wide for laying of cables, erection of poles, struts, stays etc and getting out all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete all as specified.

Removal of excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Supply and Spread Natural Riddled soil in trenches for cushioning and covering to cable complete all as specified and directed by Engr-in-Charge. Note : (i) Natural soil shall be riddled by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 cm and 15cm after laying of cable. This is then gently punned down to a depth of 10cm above the top of upper-most cable. (ii) For the purpose of measurement only punned thickness only will be considered for payment.

M&L for laying in trenches precast concrete cable covers Class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

Dismantling U/S any size of cross arms from pole /structures and fencing post, struts etc. complete all as specified and directed.

M&L for work confirming to Fe-410-O or Fe-310-O as in cross arms, support, bracings, stiffeners, clamps channels fabricated from structural steel including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including two coats of aluminium paint over a coating of red oxide primer all as directed by Engr-in-Charge.

Material and labour for boring hole under road/pavement/hardstanding by trenchless technology using ultrasound technique & necessary machine for inserting DWC HDPE of pipe 150 mm size dia. DWC HDPE to be included in the quoted rate complete all as speciofied and directed.

Supply & laying of UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 400 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts etc including taking out of exisitng unserviceable cable of any size and description including removing/takingout damaged XLPE cable complete all as specified and directed. Note: Excavtion and earthwork will be measured and paid separtley.

All as per Sr item No. 9 here-in-before but of cross sectional area 240 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 185 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 120 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 95 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 70 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 50 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 35 Sqmm, 3.5 core.

All as per Sr item No. 9 here-in-before but of cross sectional area 25 Sqmm, 3.5 core.

All as per Sr item No.9 here-in-before but of cross sectional area 16 Sqmm, 3.5 core.

All as per Sr item No.9 here-in-before but of cross sectional area 10 Sqmm, 2 core.

Supply and fixing in repair ACB 4 pole, 415 V with thermal magnetic release (manual drawout type) of capacity 630 Amps as per existing size complete all as specified.

Supply and fixing in repair ACB 4 pole, 415 V with thermal magnetic release (manual drawout type) of capacity 800 Amps as per existing size complete all as specified.

M&L for RCC cable route indicator showing LT Cable 440V with danger symbol and route of cable with arrow, made of pre fabricated factory manufactured embossed letter in RCC indicator, elliptical shape at top and rectangular shape at bottom, 750 mm long, 75 mm thickness embossed letter painted in blue colour with two coats of synthetic enamel yellow paint duly embedded in PCC block (0.45 x 0.45 x 0.45) in metre including earth work by removing damaged indicator complete all as directed and specified.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 10 to 16 Sqmm complete all as specified and as directed. Make : Denson/ M-seal/ 3M.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 25 to 50 Sqmm by removing damaged joint complete all as specified and as directed. Make : Denson/ M-seal/ 3M.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 70 to 150 Sqmm by removing damaged joint complete all as specified and as directed. Make : Denson/ M-seal/ 3M.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 150 TO 240 Sqmm by removing damaged joint complete all as specified and as directed. Make : Denson/ M-seal/ 3M.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 300 TO 400 Sqmm by removing damaged joint complete all as specified and as directed. Make : Denson/ M-seal/ 3M.

M&L for scraping and cleaning the old paint, preparation of the surface for repainting. Painting LT 09 Metre long steel tubular pole (painting 7.5 metre length) with two coats of aluminium paint and writing pole Number and Material & labour for PCC 1:2:4 (12.5 mm graded aggregate) of size 75 Cm X60 Cm x45 Cm (60cm above GL & 15cm below GL) for coping around pole including provision of necessary form work, finishing even and smooth including applying exterior emulsion paint (apex) including Modular Junction box made of SMC/FRP of size 240x130x110 mm with connector terminal 4 pole indicating RYB Phase Colour and Neutral colour to be inbuilt and including DWC HDPE pipe for passing LT XLPE electric cable upto 35 Sqmm 3.5/4 core in and out from junction box with suitable materials for fixing junction box inside the PCC (Copping) and dismantling & removing debris outdside MoD land exc 1.5km and nexc 3km complete all as specified and directed. Note :- No extra payment for any item will be given by the department. SMC/FRP Junction Box, DWC HDPE pipe, Cement Work, Scafolding, connector treminal to be included in the quoted rate.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles, earth pit, pcc work all e/m installaions as per requirement, base for bollards using with necessary form work, finishing even and smooth without using extra cement including applying exterior emulsion paint (apex) complete all as specified and as directed by Engr-in-Charge.

M&L Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in road cutting filling, foundation, fencing post, struts etc. complete all as specified and directed by Engr-in-Charge.

Supply and replacement of MCCB 630Amp rating, 4-pole 415V, breaking capacity 50 KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider.

Supply and replacement of MCCB 400Amp rating, 4-pole 415V, breaking capacity 50 KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider.

Supply and replacement of MCCB 350Amp rating, 4-pole 415V, breaking capacity 50 KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider.

Supply and replacement of MCCB 250Amp rating, 4-pole 415V, breaking capacity 36KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider

Supply and replacement of MCCB 200 Amp rating, 4-pole 415V, breaking capacity 25 KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider

Supply and replacement of MCCB 160Amp rating, 4-pole 415V, breaking capacity 25KA, Adjustable & fixed magnetic setting type. Make : Havells/ C&S/ Schneider

Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal dust (100 kg) and common salt (300 kg), vegetable soil (300 kg) including GI strip 32 x 6 as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe upto 7.5 metre and watering pipe 20 mm dia light grade with funnel and wire mesh including necessary earth work i.e exacavation and removing upto 500 metre distance, Precast (factory manufactured) RCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with Precast RCC pit cover 80 mm thick (yellow painted) with steel reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape etc including Mild steel Earth marker with earthing result, date all as per plate no.3 of SSR 2009 Page No 497 and AIR HQ Policy No Air HQ/37529/9/1/ERA/W(P&C) dated 21 Nov 16 with dismantling old earthing, complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.

Material and labour for Earthing complete with 99.9 % pure copper earth plate electrode 900 x 600 x 5 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal dust (150 kg) and common salt (400 kg), vegetable soil (400 kg), including Copper strip 20 x 3 as earth lead fixed by means of brazing etc and other end connected to the test point including 40 mm dia light grade GI protection pipe upto 7.5 metre and watering pipe 20 mm dia light grade with funnel and wire mess including necessary earth work i.e Exacavation and removing upto 500 metre distance, Precast (factory manufactured) RCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC with Precast RCC pit cover 80 mm thick (yellow painted) with steel reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape etc including Mild steel Earth marker with earthing result, date all as per plate no.3 of SSR 2009 Page No 497 and AIR HQ Policy No Air HQ/37529/9/1/ERA/W(P&C) dated 21 Nov 16 with dismantling old earthing, complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.

Supply only 400A AC digital clamp meter with carrying case and one pair (red, black) of comfort grip PVC insulated test leads with right-angle shrouded banana plugs for measureing AC current up to 400A including batteries and manual complete all as specified. Make : Fluke/ Megger/ Rishabh

Supply and fix in replacement Precast (Factory Manufactured) Earthing pit of size 450 mm x 450 mm x 450 mm having thickness 50 mm with Mortar design precast RCC Pit cover including taking down old pit cover, exacavation and making good to match with existing surface complete all as specified. Make : OM Precast/Dagar Tiles/AC Construction/Venus/Any other Precast RCC manufacturer approved by any Command.

M&L for two coats of Quick Drying 1K Epoxy Primer by Removing existing paint of sheet metal enclosure of LT panels/Installation boards of surface area upto 10 Sqm complete by following manners :- (a) Loose rust, mill scale from the metal surface by chipping, scrapping or by using any suitable solvent. (b) Sand the surface with emery paper 180 & wipe clean. (c) Use wire brush / machine tool to smoothen the rust pikes & sharp edges from the rusted surface. These rust pikes & sharp edges are difficult to coat completely & hence same needs to be smoothened before painting. (d) In case of welded joints, ensure sharp edges / pikes are smoothened with machine tool. These welded joints are highly susceptible to corrosion & hence for better protection, spot painting of these welded joints needs to be done with paint & allowed to dry before starting complete painting. (e) Clean the surface using solvent to remove greasy deposits, fine particles & dust. (f) Ensure the surface is clean & dry before painting all as specified and directed by Engr-in-Charge.

M&L for two coats of undiluted (or) 5% diluted PU Enamel paint 10 in 1 by spraying with 6 - 8 h drying in between the coats for sheet metal enclosure of LT panels/Installation boards of surface area upto 10 Sqm with Danger notice Sticker 1100 V as directed complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of aluminium lugs for LT cable of Size 25 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 35 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 50 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 70 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 95 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 120 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size150 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 185 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 300 Sqmm complete all as specified.

Supply and fix in replacement of aluminium lugs for LT cable of Size 240 Sqmm complete all as specified.

Dismantling/Removing existing RCC pole of any size, any section emebedded in concrete masonry including taking out embedded portion and making good disturbed surfaces including removing debris outdside MoD land exc 1.5km and nexc 3km complete all as specified and directed.

Supply and laying of Electrical Insulating Rubber Mat - 11KV (1mtr x 2mtr x 2.5mm Thickness) Blue/Black Colour with IS 15652 marking on every metre with dotted anti-skid design complete all as specified and directed.

Supply and fixing in replacement FRLS PVC insulated copper conductor of Size 4.0 Sqmm 3 core for bollards etc with necessary connections including heavy duty UPVC conduit 25 mm complete including making the conduit underground all as specified and directed. Note : (i) One run of PVC 4 sqmm 3 core copper cable and one run of PVC conduit 25 mm to be measured as One Running metre. (ii) PVC cable with PVC conduit to be burried in ground exc. 15 cm but not exc. 30 cm deep. (iii) Excavation and earth work shall be deemed to be included in the quoted rate.

Supply and fixing in repair Automatic transformer switch (ATS), 4 pole 415 Volts with inbuilt time delay with outdoor enclosure of rating 400 Amps confirming IEC-60947-6-1 complete all as specified and directed.

Supply and fixing in replacement of smart street/security light fitting of 120 Watt with Motion sensor based dimming, cool white, Luminous Efficacy 110 Lm/W, IP 66, with surge protection complete all as specified and directed.

Material and labour for stainless steel sections, sheet as in pillar/ post/ sides/ backings, Railings etc for signages information/cautionary signs or as in railing etc incl excavation & embedding in concrete 1:2:4 type B1 (45x45x60cm) and screwing etc cutting top to shape as directed, drilling holes, notching, welding etc of pole height 1.5 metre (dia 75mm and 3mm thick) and above frame 3x4 ft (hollow pipe of square/rectangle shape 75x50mm and 3mm thick) incl reflective type fixed to stainless steel frame work incl writing/fixing letters or figures (Block, roman, italic, indian) of approximate size 100mm height and 20mm width with high intensity prismatic reflective type ASTM type IV sheet including all necessary screw and nut & bolts, moulding, drilling and welding for E/M installations located in 3 BRD AF Stn complete all as specified and directed.

(a) MCCB 200 Amp,4P, 36KA,E66adjustable type ,rotary handle operated - 01 Nos as incoming - 01 (b) MCCB ,63 Amp,16KA, 4Pole,adjustable type ,rotary handle operated as outgoing -04 (c) Three phase digital energy meter 63 Amps with CTs for accounting energy consumption of Qty-04. Make of Energy meter AE/L&T/HPL [d] Digital universal meter with LED display for 3-ph Amp, Volt, Frequency P.F with auto/manual page scrolling facility. Make: Neptune - 01 No [e] CT coil of ratio 250/5-01 Set. Make: AE [f] Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 250 Amps capacity TPN mounted on epoxy insulators - 01 Set [g] LED type AC 220V Phase Indicators RYB, Make : C&S/Schnieder/BCH - 01 Set [h] Earthing terminals and cable glands for incoming & outgoing cables. [j] Internal wiring of panel board with copper cable single core of sutable size and including digital Multifunction Meter (VAF+PF) -1No. [k] Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door. with thermal magnetic based protection release and required breaking capacity with adjustable protection over load and short circuit and confirming to IEC 60947/IS 13947/Part-ii/1993 latest version. The MCCB should have Ics=100% Icu for short breaking capacity of required KA rms at 415 Volts 50 Hz AC. Make:Legrand DPX3, ABB Tmax (T2 series & above), Schneider NSX, L&T DSine (DN2 series & above)

(a) MCCB 400 Amp, 4P, 36KA, adjustable type, rotary handle operated H69as incoming - 01 (b) MCCB, 125 Amp, 16KA, 4Pole, adjustable type, rotary handle operated as incoming as O/G- 04Nos (c) Three phase digital energy meter 250 Amps with CTs for accounting energy consumption. Make of Energy meter AE/L&T/HPL (d) Digital universal meter with LED display for 3-ph Amp, Volt, Frequency P.F with auto/manual page scrolling facility. Make: Neptune - 01 No (e) CT coil of ratio 250/5-01 Set. Make: AE (f) Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 500 Amps capacity TPN mounted on epoxy insulators - 01 Set (g) LED type AC 220V Phase Indicators RYB, Make : C&S/Schnieder/BCH - 01 Set (h) Earthing terminals and cable glands for incoming & outgoing cables. (j) Internal wiring of panel board with copper cable single core of sutable size and including digital Multifunction Meter (VAF+PF) -1No. (k) Incoming on load chaangeover switch 250 Amp 4 pole - 01 No. (l) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door. with thermal magnetic based protection release and required breaking capacity with adjustable protection over load and short circuit and confirming to IEC 60947/IS 13947/Part-ii/1993 latest version. The MCCB should have Ics=100% Icu for short breaking capacity of required KA rms at 415 Volts 50 Hz AC. Make:Legrand DPX3, ABB Tmax (T2 series & above), Schneider NSX, L&T DSine (DN2 series & above)

(a) MCCB 100 Amp, 4P, 16 KA - 01 Nos as incoming - 01 (b) Industrial Socket 5 Pin 20 Amps single phase with MCB DP C Curve 20 Amps Controlled - 05 Nos (c) Industrial Socket 5 Pin 20 Amps Three phase with MCB TP 20 Amps Controlled - 02 Nos (d) Digital universal meter with LED display for 3-ph Amp, Volt, Frequency P.F with auto/manual page scrolling facility. Make: Neptune - 01 No (e) CT coil with suitable capcity. (f) Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 150 Amps capacity TPN mounted on epoxy insulators - 01 Set (g) LED type AC 220V Phase Indicators RYB, Make : C&S/Schnieder/BCH - 01 Set (h) Earthing terminals and cable glands for incoming & outgoing cables. (j) Internal wiring of panel board with copper cable single core of sutable size and including digital Multifunction Meter (VAF+PF) -1No. (k) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door with thermal magnetic based protection release and required breaking capacity with adjustable protection over load and short circuit and confirming to IEC 60947/IS 13947/Part-ii/1993 latest version. The MCCB should have Ics=100% Icu for short breaking capacity of required KA rms at 415 Volts 50 Hz AC. Make:Legrand DPX3, ABB Tmax (T2 series & above), Schneider NSX, L&T DSine (DN2 series & above)

Material and Labour for SS Aldrop complete Set 250 mm length made of Stainless Steel, suitable Size for LT Electric panel door, Easy Installation, Corrosion Resistant with proper fixing with SS nut and bolts to close the LT panel double door complete all as specified and directed.

Material and Labour for door handle 120 mm-02 Nos complete Set made of UPVC, suitable Size for LT Electric panel door, Easy Installation, Corrosion Resistant with proper fixing with SS bolts and washers to close the LT panel double door complete all as specified and directed.

Suuply only 5 in 1 Multifunctional Plier Set with 5 Interchangeable Tool Head - Wire Stripper, Crimping Plier, Cable Cutter, Electrician Scissor, Linesman Plier Kit all as specified and directed.

Supply and erecting in true vertical position steel tubular swaged pole 09 metre long type 410 SP-31 complete with base plate and bracket fixed at top for street/security light, including removing existing damaged pole and painted new pole internally throughout and externally up to the embeeded depth with two coats of black bitumnous paint and remaining external portion with two coats of aluminium paint over a coat of red oxide primer including providing 30cm wide alternate strips with sky blue and white synthetic enamal paint upto 1.2m high from ground level including excavation work (1.5*0.6*0.6 metre) and PCC 1:3:6 type C1 (0.6*0.6*1.5 Metre) for erecting electric pole of length 9 metre pole complete all as specified and directed.

Labour for cutting / Pruning / trimming of tree branches in vicinity of LT electric pole for clear vision of street light lighting on road including disposal of the trimmed branches by dumping in low lying area complete all as specified and as directed. Note : (i) Labour / Tools / Ladder / Vehicle for Cutting / Pruning / trimming of tree branches shall be provided by contractor and rate for the same are included in the quoted rate of item.

Material and labour for PCC 1:2:4 (12.5 mm graded aggregate) of size 30 Cm X 30 Cm x 45 Cm (30cm above GL & 15cm below GL) any shape or size as required including necessary formwork and excavation for LED bollard fixing and supply and fixing of new bollard including 25mm PVC conduit for passing electric cable in and out including 100mm length fastners/nut&bolts for fixing bollard including applying exterior emulsion paint (apex) and dismantling and removing debris outdside MoD land exc 1.5km and nexc 3km. Complete all as specified and directed. Note : Cost of LED Bollard of make : Jaquar cat pad No. OBL GRY LBLDDSC010XW or equivalent in Philips/ Havells, PVC conduit, Fastners, PCC work with excavtion, dismantling of bollard base to be included in the quoted rate.

(a) MCCB 400 Amp, 4P, 36KA, Adjustable & fixed magnetic setting type (I/C) - 01 Nos (b) MCCB, 250 Amp,16KA, 4Pole, Adjustable & fixed magnetic setting type (O/G 01Nos) (c) MCCB, 100 Amp,16KA, 4Pole, Adjustable & fixed magnetic setting type (O/G 02Nos) (d) Digital universal meter with LED display for 3-ph Amp, Volt, Frequency P.F with auto/manual page scrolling facility. Make: Neptune - 01 No (e) CT coil of ratio 400/5-01 Set. Make : AE (f) Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 450 Amps capacity TPN mounted on epoxy insulators - 01 Set (g) LED type AC 220V Phase Indicators RYB, Make : C&S/ Schnieder/BCH - 01 Set (h) Earthing terminals and cable glands for incoming & outgoing cables. (j) Internal wiring of panel board with copper cable single core of sutable size and incl 03 Nos bakelite control fuses. (k) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door.

Supply and Fixing in replacement Single Phase Multi-function Electric Energy LCD Sub Meter (5-30A, 2 Wire, 240V, 50Hz, 3200imp/kWh) ISI Certified, with with transparent Hinge type box to fix meter within, Class 1.0 High Accuracy (IS 13779-1999, CBIP Report-88 &IEC Standards, High Surge Resistant, Hackproof, Low Power Consumption, High Insulation Resistance (> 5 M Ohms) Anti-Tamper Features, Abnormal Voltage, Earth Load Tamper Indication etc). Dust Proof Body, Elegant Poly-Carbonate Casing complete all as specified and directed. Make: L&T/HPL/LAN engineering & technologies Note :- Hardware’s and any other insulating materials or any modifications to panel/meter box required shall be provided by the contractor and the cost is deemed to be included in the unit rate quoted.

Supply only electrical tool bag consisting of following tools for smooth functioning of electrical network. (a) Combination Plier 180 mm High-Quality Chrome Vanadium with Ergonomic Grip- Qty - 01 (b) Automatic wire stripper for copper or aluminum cables up to 10mm² (multiple cables) and up to 6mm² (single cables), Qty - 01 (c) Yellow Line Tester Screwdriver, Length 200 mm, Qty -01, (d) STANLEY Knife, 18mm for electrcian, Qty - 01 (e) 7w 800LM Aluminium LED Torch, Qty -01 (f) Key Ring Imperial Allen Hex Key Set, L / Arm Ball 12pcs Qty - 01 (g) Testing lamp with Bulb, Qty -01 (h) Taparia Multipurpose Digital Line Tester Screwdriver, Length 130 mm, Width 17 mm, Qty - 01 (j) Palm Sized Digital Multimeter, Battery Powered, Qty - 01 (k) 400A 600V Digital AC Clamp Meter with connecting accessories, Qty - 01 (l) 304.8 mm (12 Inch) x 18 TPI High Speed Steel Gray Hacksaw Blade with handle/frame, Qty - 01 (m) Electricians Hammer, 200 grams, Qty - 01 (n) Spanner set Orientation: Double Sided Size: 6 to 32, Wrench Type : Set Qty - 01 (o) 12 Pieces Ring Spanner Set, Qty-01 (p) 2-Piece Extra Long Screwdriver Set length 25 x 0.6 x 0.6 Centimetres Make :- Taparia/Fluke/STANLEY/Bosch/Hilti

Note :- Amount of credit of Rs. 88900.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S MATLOOB AHMED (BID ID -3382503)

M/s Bhanu Enterprises (BID ID -3382648)

SATTYAM BUILDERS (BID ID -3382075)

R N Enterprises (BID ID -3382311)

Jai Maa Electrical Works (BID ID -3381941)

PAUL REFRIGERATION (BID ID -3382775)