Renovation work of Conference Hall at Block No.1, 9th Floor, New Sachivalaya,Sardar Bhavan, Gandhinagar. (With Electrical and Sound System Work) Work

Name of Work: Renovation work of Conference Hall at Block

No.1, 9th Floor, New Sachivalaya,Sardar Bhavan, Gandhinagar.

(With Electrical and Sound System Work)

VOLUME 3 –SCHEDULE - B

Civil, Plumbing, Interior, Fire Fighting with EI and Sound

Approved tender make list

Volume 3: Billing of Quantities

TABLE OF CONTENTS

BILL OF QUANTITIES

B. ABBREVIATIONS

BILLING OF QUANTITIES – PART :

2. ELECTRICAL WORK

BILLING OF QUANTITIES PART :

Approved tender make list

BILL OF QUANTITIES

1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General and Special Conditions

of Contract, Contract Data, Technical Specifications, and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given to provide a common

basis for bidding. The basis of payment will be the actual quantities of work ordered and carried out, as measured

by the Contractor and verified by the Engineer and `valued at the rates and prices bid in the priced Bill of Quantities

(above of below tender rate), where applicable, and otherwise at such rates and prices as the Engineer may fix

within the terms of the Contract. The % above and below shall be applicable to all items and their rates

3. The rates and prices bid in the priced Bill of Quantities shall, except insofar as it is otherwise provided under the

Contract, include all Constructional Plant, labour, supervision, materials, erection, maintenance, insurance, profit,

taxes (including GST etc.) and duties, together with all general risks, liabilities, and obligations set out or implied

in the Contract.

4. % above or below shall be entered against the priced Bill of Quantities, whether quantities are stated or not.

5. The whole cost of complying with the provisions of the Contract is considered to be included in the Items provided

in the priced Bill of Quantities, and where no Items are provided, the cost shall be deemed to be distributed among

the rates and prices entered for the related Items of Work.

6. General directions and descriptions of work and materials are not necessarily repeated nor summarized in the Bill

of Quantities. References to the relevant sections of the contract documentation shall be made before entering

prices against each item in the priced Bill of Quantities.

1. All works shall be carried out as per BOQ and other specifications as directed.

2. Rates quotes include clearance of site (prior commencement of work and at its close) in all

respects and hold good for work under all conditions, site, moisture, weather etc.

3. Contractor shall state even "NIL" percentage, if no deduction is offered.

4. In R.C.C. Item where there is a change in Grade of Mix or change as per actual mix design the

difference of cement consumption shall be deduct from rate of original item at the rate of star

rate mentioned in this tender.

5. One Percent of Amount of work done shall be recovered from the contractor's payment as

Approved tender make list

6. We hereby declare that, I/We have visited the site and fully acquainted myself/ourselves with the

local situation regarding materials and other factors pertaining to the works before submitting

7. I/We hereby declare that I/we have carefully studied conditions of contract, specifications & other

tender documents of this work and agree to execute the same accordingly.

Approved tender make list

B: ABBREVIATIONS

Abbreviation For

Rs / INR Indian Rupees

LS or SUM Lump Sum

Nr or No. Number

Lm or m Linear metre

KM or km Kilometre

Hct or ha Hectare

m2 or sqm-smt Square metre

m3 or Cum-cmt Cubic metre

KG or kg Kilogram

T or MT Tonne or Metric Tonne

PS Provisional Sum

IRC Indian Roads Congress

MORTH Specification Specifications for Road and Bridge Works

issued by the Ministry of Roads Transport &

Government of India

BIS Bureau of India Standards

Prov. Provisional

Eqpt. Hrs Equipment hours

P.O.L. Petroleum, Oil and Lubricants

Veh. Day Vehicle Day

Cu cm – cucm Cubic Centimetres

Approved tender make list

1. The Bill of Quantities contains the following part Bills Tender no.

Renovation work of Conference Hall at Block No.1, 9th Floor, New Sachivalaya,Sardar

Bhavan, Gandhinagar. (With Electrical and Sound System Work)

2. Bidders shall price the Bill of Quantities in local currency only.

Bill no. Work Item No. Total Amounts

Bill no. Work Item No. Total Amounts

1 Civil, Plumbing, Interior & Fire Fighting Work 1 to 107 ₹

2 Electrical and Sound System Work 108 to 185 ₹

Total Civil+ Electrical ₹

3 CREDIT ITEMS 186 to 206 ₹ -4,82,587.33

A Total ( 1 - 2) TENDER AMOUNT ₹

In Words Three Crore Sixty Two Lakh Ninety Thousand Eight Hundred Fifty Two Rupees And

Thirty Nine Paise Only

Deputy Executive Engineer Executive Engineer

SC Electrical sub division No 1 SC Electrical Division,

Gandhinagar Gandhinagar

Deputy Executive Engineer Executive Engineer

C P Sub Division No.-04 Capital Project Division No.2,

Gandhinagar Gandhinagar

Approved tender make list

BILLING OF QUANTITIES – PART:

Name of Renovation work of Conference Hall at Block No.1, 9th Floor, New

Project : Sachivalaya,Sardar Bhavan, Gandhinagar. (With Electrical and Sound System

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

Estimated Rate Total

But May Item Description Rate in Rate in Unit

Be More Figure Words

Demolition and disposal of unserviceable Thirty Nine

1 2 materials with all lead and lift.(i) Unreinforced 639.72 Rupees And Cu.M

concrete. Seventy Two

Demolition and disposal of unserviceable

2 2 1110.75 Ten Rupees Cu.M

materials with all lead and lift.(i) R.C.C. Work.

Demolition of Brick work and stone masonry Seventy

including stacking of serviceable materilas and Seven Rupees

disposal of unserviceable materials with all And Ninety

lead and lift.(ii) In Cement Mortar. Two Paise

Dismentling C.I. or M.S. pipes G.S.W.pipes abd Seventy Eight

A.C. rain water pipes with fittings and clamps Rupees And

including stacking the materials with all lead Fifty One

and lift ( for any dia, of pipe). Paise Only

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

5 295 50.11 And Eleven Sq.M

disposal of unserviceable materials with all

Dismentling doors, windows, ventilators etc. One Hundred

(wood or steel) shutters including chowkhats Ninety Seven

6 9 architraves, holdfasts and other attachment 197.09 Rupees And Each

etc. complete and stacking them within all lead Nine Paise

and lift.(i)Not exceeding 3 Sq.M. in area. Only

Dismentling doors, windows, ventilators etc. Two Hundred

(wood or steel) shutters including chowkhats Sixty Three

7 12 architraves, holdfasts and other attachment 263.9 Rupees And Each

etc. complete and stacking them within all lead Ninety Paise

and lift.(ii) Exceeding 3 Sq.M. in area. Only

Approved tender make list

Dismentaling of sheet roofing, cement sheet,

partition, gypsum sheet including ridges, Hips,

Valleys, Gutters and all framing andmembers

8 707 etc. stacking of serviceable materilas and 56.79 Sq.M

disposal of unserviceable materials with all

lead and lift.(ii) A.C. sheet roofing/cement

sheet/ gypsum sheet/ Partation.

Removing and scraping of old deteriorated

plaster of any thickness from wall / R.C.C

9 245 member including stacking of serviceable 20.55 Sq.M

material and disposal of unserviceable from

site of work with all lead and lift.

Brick work using common burnt clay building Seven

bricks having crushing strength Eacht less than Hundred

35 kg./Sq.Cm. at any height in Cement Mortar Ninety Seven

1:6. (1- Cement : 6 -fine sand)(B) Conventional. Rupees And

Micro Concrete :25mm

Repair of Concrete : Step 1 : Remove all loose

concrete with chisel and make the depth of

repair uniform , Step2 : Clean the

reinforcement with wire brush and rust

remover Rebakleen to remove all loose rust

and apply one coat Zinc rich primer (Master

Emaco P130). Step 3: Applying Polymer

modified mortar of average 25mm thickness

11 254 682.78 Rupees And Sq.M

using 1 part cement 3 part sand and 5.0 Littre

Master Emaco SBR 2 of BASF mixed per 50kg

cement to the chipped concrete by trowelling

using steel trowel complete. Step 4 : Apply one

coat of water based concrete curing compound

(FOSROC make Concure WB) inclusive of

Manpower, Material and Equipment.work

complete as per the instuction of

EIC/Client/Architect. (At All Floor)

Providing 10mm thick cement plaster in single Two Hundred

coat on brick/concrete ceiling for interior Ninety Two

12 142 plastering at any height and finished even and 292.04 Rupees And Sq.M

smooth in (ii) Cement mortar 1:3 (1-cement :3- Four Paise

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

13 245 brick walls for interior plastering at any height 342.15 Sq.M

and finished even and smooth in (ii) Cement

mortar 1:3 (1-cement :3-sand) .

Approved tender make list

Applying Two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

14 1384 including thoroughly brushing the surface free 40.59 Sq.M

from mortar dropping and other foreign matter

and sand papered smooth. item shall be used

as per instruction of Architect/EIC.

Royal Touch Paint: Providing and applying royal

touch paint on ceiling and walls as per

instructions of Engineer-in-Charge. The method

15 1384 290.38 Rupees And Sq.M

should be inclusive of 1 coat primer and 2 coats

of approved shade of royal paint as per

specifications.

Providing and laying Polished granite stone slab Two

18 mm thick in risers of steps, dedo and pllars Thousand

laid on 10 mm thick cement mortar 1:3 (1 Nine

cement : 3 coarse sand) and jointed with gray Hundred Fifty

cement slurry including semi round edge finish Four Rupees

with moulding, rubbing & polishing etc. And Forty

Complete. (Granite's Texture, shed, Colour and One Paise

pattern as approved by EIC ) Only

Providing laying and jointing in true line and

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

17 20 195.67 Rupees And Rmt

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.[D]

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

18 50 densidy, complete with special falnge 339.05 Rmt

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

Providing and fixing Brass ball Handle Valve of Four

standard compny like Zoloto or equivelent and Hundred

as per directed by engineer in charge. (D) Four Rupees

50mm dia. And Forty

Providing and fixing Brass ball Handle Valve of Fourteen

20 1 standard compny like Zoloto as per directed by 614.43 Rupees And Each

engineer in charge. (A) 15mm dia. Forty Three

Approved tender make list

Angular cock W/O flange: Providing, fixing and

testing and commissioning of 15mm CP brass

angle valve with CP copper connecting pipe

21 1 375 mm long along with nuts, washer and 1573.83 Each

brass flange complete as per drawing and

details(for wash basin control valves) or

Providing laying and jointing in PVC SWR pipes

IS 13592 for Drain - 75 mm dia including fittings

as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

22 4 150.21 And Twenty Rmt

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials.[D] 75mm. To be fitted as per

the directions of Engineer-in-Charge.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of

the following Eachminal diameter of self

23 1 599.64 Rupees And Each

cleansing design with C.I scread down or

hinged grating including the cost of cutting and

making good the walls.

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

24 5 wall with the help of clamp at every two metre 72.65 Rmt

C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Perforated Gypsum Ceiling:

Providing and fixing Anutone - Snazz Pixel

Taper Acoustic Ceiling, having total light and

sound absorption quality, T24 conceil grid type

textured ceiling having panel size 1195 x

25 320 mm or as directed, Glass fiber core and 1742.25 Sq.M

thickness upto 15mm or as directed with

having density 120kg/Cu.M or as directed shall

be fixed on suspended GI suspender and

internal channel as per manufacturer's

specification and as directed by EIC.

Three Track Window : Providing and fixing of

Domal series Three Track partly glazed fix and

partly Glazed Sliding Window with colour

aEachdized Section Track 101.5 x 50 x 1.4 mm

26 106 4680.07 Eighty Sq.M

thick @ 1.798 Kg / Rmt and Slidding Shutter

frame 66 x 26 x 1.4 mm thick @ 0.774 Kg / Rmt

with clear glass 8mm thick with Rubber gasket

with help of Glazing Clip of size 26.7 x 15 x

Approved tender make list

mm using hardware material, clot, bearing,

lock and Labour etc. with SS304 mosquito net

complete as approved by Engineer In Charge.

Providing and fixing standard extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (@ Wt. 0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with

27 2 1175.56 Seventy Five Sq.M

5 mm thick frosted glass as details etc

complete for Ventilation. Install as per the

Fifty Six Paise

instructions and directions provided by the

Engineer-in-Charge.

Providing and fixing None reflective solar Fourteen

28 106 contact film for fixing on glass. TO be fixed as 514.16 Rupees And Sq.M

per the instructions of Engineer-in-Charge. Sixteen Paise

Providing Wood work in frames of Doors, Thousand

windows cleare story windows and other Twenty Three

similar works wrought, framed and fixed in Rupees And

position. (A) Indian Teak Wood Nineteen

Providing & fixing 35mm thick commercial

Flush door shutter with Sheet Glass including

alluminium fixtures and fastenings including

laminate covered on sides of the frame. The

flush door shall be finished with veneer or

laminate or sheet glass as specified on both or

either sides. Rate shall including providing all

30 21 necessary consumables viz. adhesive, 26496.14 Sq.M

necessary hardware, Floor Spring - Droma,SS

Hinges 12.7 cms length, S.S. stopper30cm long,

Door Closer, Handle, necessary beads molding,

lipping, fastenings completed at all floors &

heights as per architectural drawings and

instructions. sample mock shall be approved

from Architect/EIC.

Approved tender make list

Providing and fixing Main Door as per drawing

made up of periphery M.S. Pipe electro coated

35 to 40 Kg/sqm fitting with 6mm heavy

fastner 150mm as per detail or directed by EIC,

horizontal M.S. Sq. pipe outside, 5mm thick

toughened glass with beading Patti, 19mm

marine ply with edge beading & veneer on

both side, inner veneer finish with pu polish,

having 600 high SS Heavy handle of kich make,

concealed lock of kich make matt finish, Dorma

High capacity UP TO 300 KG DOORS Floor

springetc complete, the material selection shall

be done by EIC/Architect, the deailing shall be

as per drawing and as directed by EIC.Rate shall

including providing all necessary consumables

31 11 viz. adhesive, necessary hardware, Godrej 150 37821.42 Sq.M

X76X2.5 mm Steel SS Door Mount heavy Hinge

Sliver, door stopper, Dorma Door Closer

min1400mm Width ,necessary beads molding,

lipping, fastenings completed on both side,

seasoning, anti termite coating, peripherial

lipping with finishing, low VOC adhesive, nails,

fastener with all labour for NOitem specified or

which is necessary to have a complete door

assembly etc complete for all level all height.

Design, figure, colour shade and polish tint to

be as per design. All the work shall be done as

per instruction given by EIC and as per

Approved tender make list with all relevant IS

codes. sample mock shall be approved from

Providing and fixing Wall paneling (Upper) -

Anutone - Slats surco plus - L12-2-2mm

grooves @ 12mm C/C. Thae paneling should be Ten

seamless - tongue grooved, contiEachus Thousand

paneling, 192 x 2440mm size - NOgrid, wood Nine

finish, pinewood HDF core with rear side Hundred

perforation and glass wool lining for sound Seventy One

insulation. A class - 5 test fire retardent (FR) Rupees And

and minimum thickness of 16mm with density Thirty Two

700 g/Cu.M, glasswool of 45 Kg/Cu.M density Paise Only

for sound absorption. The item shall be

followed as per instruction given by EIC.

Approved tender make list

Veneer Wall Paneling: Providing and fixing

Veneer wall paneling and false ceiling work as

per drawing and as per following: 1) Providing

and fixing of Close stud type wall paneling

framing system of approved make, which

includes good quality framing like Gypsteel

ULTRA CLOSED STUD partition of Saint Gobain

or as per approved make. 48x0.6mm Gypsteel

ULTRA CLOSED STUD should be placed at

600mm c/c in 50x0.5mm Gypsteel ULTRA floor

and ceiling channel including bracing, Eachggin

channel, necessary accessories rawl plug, SS

304 fastener, angle cleat has to be provided at

the horizontal joints of the two ply. 2)

Providing and fixing 12 mm thick water

resistant ply confirming IS 303 BWR on

installed wall paneling framing, with SS

screw, fastener as suggested by framing Five

vendor. 3) Providing and fixing 3.5 to 4 mm Thousand Six

thick Veneer of approved make and shade on Hundred

33 222 ply paneling work, fixed partition, ceiling work, 5699.48 Ninety Nine Sq.M

any ply surface etc with necessary nails, Rupees And

screws, adhesives as per drawings and Forty Eight

approved sample. Veneer shall be selected and Paise Only

sorted for uniform straight lined, light colored

from matching group. 4) Polishing work shall

be carried out as specified of approved make,

shade and texture. 5) For the false ceiling

work, the veneer paneling should be done on

th3e surface of gypsum false ceiling by the help

of drilling and screwing by desired dimensions

of screws. And veneer should be applied and

fixed similarly as that in the wall paneling by

the help of any bonding agent or glue and

polished accordingly. 5) The rate shall be for all

heights, all places, all places, etc complete as

directed by engineer in charge. Actual laid area

shall be measured and paid without

considering any wastage. Provide and install as

per the directions provided by the Engineer-in-

Charge and make as tender or equivalent.

Providing and fixing Anutone Subtex clouds

colors for Acoustical treatment as per drawing Six Thousand

and instruction given by EIC. The material shall Two Hundred

34 143 be fixed as per manufacturer's specification 6243.06 Forty Three Sq.M

and as directed by EIC. The sample shall be Rupees And

passed by Architect/WIC before execution of Six Paise Only

Approved tender make list

Providing and fixing Stage wall paneling-

Anutone - Ekcel Tufbloc HDRF - Concealed

Paneling. Thae paneling should be seamless

concealed fireproof wall lining, NOgrid, Twelve

plastered Magnesia core - 8mm thickness, Thousand Six

1198 x 2398mm size, density 1000 kg/Cu.M or Hundred

as directed by EIC, plastic painted selected by Forty Five

Architect, glasswool bedding for sound Rupees And

insulation of 45 Kg/Cu.M density. The Twenty

installation accessories would be Strut Seven Paise

CC10|CC25|CC50, SynthPF, Stick S7, Seam Kit Only

by Anutone Fasteners and local hardware by

others The item shall be followed as per

instruction given by EIC.

Stage support structure - Steel work, welded in Eight

built up sections framed work including cutting, Thousand

hoisting, fixing in position and applying a Eight

priming coat of red lead paint. (A)In beams and Hundred

joists, channels angles Tees, flats, with Thirty Seven

connecting plates or angle cleats as in main Rupees And

and cross beams. Hip and jack rafters, purlins Fifty Paise

conneted to common rafters and the like Only

Providing and fixing Stage floor made up of

commercial 25mm thick plywood sheet with

necessary tools and equipment's with

hardware as BWR/Waterproof/Termite Proof/

37 274 calibrated plywood 710 of standard make like 726.42 Sq.M

Century, Greenlam, Marine, Greenply, Saint-

Gobain, Sainik etc, teakwood batten complete

as per instruction given by engineer in

charge/Architect.

Providing and fixing Stage floor made up of

12mm thick Commercial plywood sheet with

necessary tools and equipment's with Five Hundred

hardware as BWR/Waterproof/Termite Proof/ Eighty Seven

38 274 calibrated plywood 710 of standard make like 587.63 Rupees And Sq.M

Century, Greenlam, Marine, Greenply, Saint- Sixty Three

Gobain, Sainik etc, teakwood batten complete Paise Only

as per instruction given by engineer in

charge/Architect.

Providing and fixing Wooden Flooring Crafted Three

from high-quality solid oak, this flooring offers Thousand

durability, elegance, and a natural wood grain Eight

having smooth, Matt/Glossy (customizable) Hundred Fifty

finish, Plank size 6" x 48" having depth upto Seven Rupees

20mm, fixed with Tounge and Groove, And Thirty

adhesive, scratch and water resistant shall be Four Paise

installed as per direction given by EIC. Only

Approved tender make list

Providing and fixing Indian made Carpet having

pile fiber 100% polu propylene having pile Three

thickness 6mm, turf widrawal strength Eacht Thousand

less than 20N and minimum 165000 turfs/Sq.M Two Hundred

40 300 with minimum stich ration at 40/10 cm, bulk 3260.28 Sixty Rupees Sq.M

contiEachus filament type yard construction, And Twenty

the design, texture, material shall be selected Eight Paise

by Architect or EIC. The sample shall be Only

approved before execution.

Providing and fixing Roller Blind curtain with

superior quality Acmeda Mechanism including

41 42 all necessaries fitting like breaket, chain, 2439.15 Sq.M

Fishers, screw etc. complete as per instruciton

of Engineer in charge.

Providing & Placing in Position Conference Hall

Table of size required dimensions & 750mm

Height with modesty panel having 18mm and

12mm BWR calibrated plywood Acrylic Solid

Surface Finish, Surface Finish should be Glossy

Finish, Colour: White and edges Finish with

Batten Patti of 40x 6 mm and top 3 ot 5mm

42 35 thick veneer with 5 layer PU Polish and having 16790.05 Sq.M

1mm thick Laminate on sides and inside area

face Edges made from 18mm and 12mm BWR

calibrated plywood of standard make like

Century, Greenlam, Marine, Greenply, Saint-

Gobain, Sainik etc, teakwood batten complete

as per instruction given by engineer in

charge/Architect.

Providing and fixing Medium Back Revolving Twenty Six

Chair (Model Name: HOF MARCO 1002) of avg Thousand

dimension 670x670x1010 mm (WxDxH) having Four

febric + NET / Mesh finish and shall be selected Hundred

by Engineer In Charge / Architect shall be of Sixty Two

standard make of HOF, Godrej,Wipro. Rupees Only

Providing and fixing Executive High Back

Revolving Chair (Model : HOF: HOF-CH-PR- Fifty Nine

ZORO-451-H-RX01) of avg dimension Thousand

700x700x1100 mm (WxDxH) having artificial Seven

leather upholster finish and shall be selected Hundred

by Engineer In Charge / Architect/Department Ninety Two

shall be of standard make of HOF, Godrej, Rupees Only

Providing and fixing Visitor Chair of avg Six Thousand

dimension 450x3550x950 mm (WxDxH) having Seven

45 20 febric finish and shall be selected by Engineer 6716.5 Hundred Each

In Charge / Architect/Department shall be of Sixteen

standard make of HOF, Godrej, Wipro.. Rupees And

Approved tender make list

Center Table : Providing & Placing in position

Center table of size 900 X 600 X 450 mm with

Varnish Polish finish made from Solid

46 2 11615 Hundred Each

teakwood Table Top made from

Teakwood/Glass complete as per instruction

given by engineer in charge/Architect.

PODIUM: Providing Podium size as Top Width

28" to 36" Reading Sur face Slanted top at a

Comfortable Angle(15-20 Degrees), Depth 20"

to 24" , Height 46" to 48" and Two open Seft Fifty Five

detailed above made from Plywood all proof ( Thousand

IS 710 ) 18/19 mm boards and Veneer Sheet - 3 Two Hundred

47 1 to 5mm thick finish with Pu polish Podium top 55299.13 Ninety Nine Each

encapsulated with 25mm Solid Acrylic Corian Rupees And

sheet , 4 Eachs Heavy Load Low Profile Caster Thirteen

Swivel With Stopper (wheel) on bottom fitting Paise Only

with require Labour & Hardware complete as

per instruction given by engineer in

charge/Architect.

Providing and fixing SS Name Plates 304 grade Thirty Six

up to 2mm thick with edge smoothening with Thousand

computerized printing having S.S. Flat button Nine

head cap screw at edges/corner with Wooden Hundred

base made up of 12mm thick plywood sheet Sixteen

covered with veneer sheet as directed by Rupees And

Engineer-in-Charge having batten border with Twenty Six

melemine polish finish of any size. Paise Only

Providing and fixing of Floor Main Enterance

Board Veneer Finish madeup of 18mm thick

BWR plywwod of standard make like Century, Sixteen

Greenlam, Marine, Greenply, Saint-Gobain, Thousand Six

Sainik etc with at back, 3 to 5 mm thick veneer Hundred

49 5 sheet including PU Polish, batten border and 16643.61 Forty Three Sq.M

name plate madeup of S.S. Grage 304 having Rupees And

thickness upto 2.5mm having size as per Sixty One

requirement including computerized printing in Paise Only

SS plate to board complete and shall be

approved by Engineer In charge/Architect.

Providing and fixing of Perforated SS Dustbin

having Lid/ Without lid 200mm dia and 305mm

50 5 505 Five Rupees Each

Ht shall be approved by Engineer In

charge/Architect.

Labour Charges for dismentalling existing

furniture with necessary equip. and

51 239 202 Two Rupees Sq.M

moving/replacing it as per instruction given by

Provoding and fixing of Door Mat of any design, Six Hundred

52 3 texture and material as per directed by 631.25 Thirty One Sq.M

Engineer In Charge Rupees And

Approved tender make list

Providing and fixing in position 3" to 8" height One

SS English / Gujarati letters made from 1.0mm Thousand

53 25 thick stainless steel sheet as directed by 1515 Five Hundred Each

Engineer in charge with all material, hardware, Fifteen

accessories and fitting etc. Rupees Only

Wooden Calender Box (Size - 510 x 650 mm):

Providing and fixing Wooden Finish Calender

box with PU Polishing as final finishing. It is

made in solid Ghanateak wood finishing with Nine

PU Glossy finish polish as per the instruction Thousand

given by Engineer-in-Charge. Brass Stopper and Seven

hinges used to give box a good look. 6mm Hundred Fifty

Toughened extra clear glass provided between Seven Rupees

the frame for visibility. Item includes all kind of And Thirty

hardware, handles etc as per instruction and Four Paise

selection by EIC. All kind of labour and Only

transportation charges are inclusive in the

given rates. NOextra cost will be paid. Item will

measure in numbers for single unit.

Providing and fixing Artificial Plant with S.S. 304 Thousand

55 30 grade square or round pot having height upto 2525 Five Hundred Each

0.6m with necessary filling as directed by EIC. Twenty Five

Providing and fixing Art work on wall with Thousand

56 10 necessary wooden framing with polish as 5555 Five Hundred Sq.M

directed by EIC. Fifty Five

Slatted Panelling : Providing, fixing and keeping

in good condition until project completion

factory made PVC/ WPC wall panel made of

wall panel work done with three different

elements with wall thickness 1.0mm named as

‘C’ (bottom), ‘U’ (patti), and ‘L’ (corner). The

complete frame work to be supported by Three

PVC/WPC Pipe. ‘L’ angle from the roof and ‘L’ Thousand Six

section to be fixed all around the wall. Hundred

57 369 6mmx250mm or appropriate width PVC/WPC 3624.34 Twenty Four Sq.M

panel are fixed with screws on ‘U’ section or Rupees And

using clip on mechanism. The PVC/WPC section Thirty Four

shall be joined with lap joints. Necessary cut Paise Only

outs for electrical connections, fans, lighting,

etc. shall be provided and all the visible cut

edges, corners and junctions with wall shall be

covered by extruded corner beading section by

applying suitable adhesive. Item rate to be

complete as per manufacturer’s specification

Approved tender make list

and direction by Engineer-in-Charge installed

as per design provided by the architect as per

the directions provided by the Engineer-in-

Charge. Make as tender or equivalent.

Mud Painting : Providing and fixing mud

painting on waterproof plywood frame using

natural Lac resin based paints. mud, cowdung

and herbs to be mixed properly using Eighteen

traditional cowdung-mud plaster technique Thousand

and applied on 12 mm thick water proof Nine

58 15 plywood fixed on a 2"X1" aluminium frame 18954.9 Hundred Fifty Sq.M

with 50 mm solid wooden beading patti duely Four Rupees

polished with natural moEachcoat polish. And Ninety

Painting to be done as per instruction of the Paise Only

architect in given pattern and design and as per

direction of Engineer in charge. Make as per

Tender or Eqivalent.

Gypsum Ceiling: Pro. And fixing single

layerwater proof gypsum board 12.5mm thick

sections using water proof board of size

1220mm x 1830mm x 8.0mm suspended by GI

suspender channel of size 25mm x3 mm with

intermediate channelog size 18mm x 40mm x Six Hundred

0.8mm at 1220 mm center to center ceiling Six Rupees

59 149 section of size 40mm x 35mm x 0.55mm at 606.95 And Ninety Sq.M

457mm c/c and perimeter channel A of size Five Paise

20mm x 27mm x 30mm x 0.5mm at edges & Only

drops incl. paper taps and sofit cleat, anchor

fastener, scoch bolt connecting cleat, joining

compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc.

comp. as per detail drawing as directed.

Dado Work : Providing and laying Lapato/ Matt

/Glossy/ Eachn skid,/Rustic finish Double

Charged Vitrified tiles in dado using

minimum 10 mm thick tiles approved by

architect /client (size 600 mm X600mm) fixed

in dado on 10 mm th. Cement plaster 1:3 (1 Two

cement: 3 coarse sand) All surfaces must be Thousand

dimensionally stable according to IS 1443- Five Hundred

1972, level, cured, undamaged, Twenty Six

compact,rigid,resistant, dry and free from any Rupees And

debonding agents tiles fixed by approved tile Twenty

adhesive and all application shall be done Seven Paise

under instruction of manufacturer guideline Only

and specification , and jointed with 3mm to

5mm thick epoxy grouting of approved shade

and colour in proper line and level as per

detailed drawing / instruction all complete as

per approved sample by Architect, drawings

Approved tender make list

and instruction of EIC. at all floors / all levels /

all heights and all shapes .

Vitrified Flooring : Providing and laying Lapato

/ Glossy/Matt/Rustic finish full body/ Double

charged antiskid Vitrified tiles flooring using

minimum 10 mm thick tiles as per approved

make list or selected by Architect , tile size Two

(1200 mm X 600 mm, 800 x 800, 900 x900 ) Thousand

including preparing base for leveling with Eight

20mm thick cement mortar 1:6 (1 cement : 6 Hundred

coarse sand ) and jointed with 3mm to 5mm Seventy Nine

thick epoxy grouting of approved shade and Rupees And

colour in proper line and level as per detailed Ninety Paise

drawing / instruction and approval by Only

architect.The rate shall be inclusive of

protecting the flooring by plaster of Paris and

plastic and/or bubble top sheets. (At all floor

Glass & Alluminium framed Slim Partition with

door : Providing and fixing High-grade

alluminum powder coated profile frame

Dimensions: 25mm x 45mm and with 8mm to Five

12mm thickness of Glass with , clear, frosted, Thousand

laminated, or mesh glass, catering to various Thirty Five

privacy and aesthetic preferences with Some Rupees And

systems offer acoustic performance and Eighty Paise

Require height Options include fixed panels, Only

sliding doors, and foldable systems, allowing

customization to fit specific spatial needs of

MDF+CNC : Providing and fixing CNC/Laser cut

waterproof HDHMR (High-Density High

Moisture Resistance board) panel of 12mm Seven

thickness fixed finished with PU Paint and as Thousand

required provide a backing of garware Two Hundred

63 58 translucent film. Design and pattern as per 7259.9 Fifty Nine Sq.M

architect's drawing and work to be done as per Rupees And

direction of Engineer-in-charge. With all Ninety Paise

material, labour, accessories, hardware, Only

transportation with all scaffolding & support

Pelemet Work: Providing and fixing AC Pelmet

64 9 of Wooden .Design as per selection of Architect 2903.75 Sq.M

and as per direction of Engineer -in-charge.

Approved tender make list

Providing and applying luxure texture finish on

wall surfaces using approved textured

materials such as acrylic-based compounds or

equivalent, including surface preparation, base

65 140 coat, texture application with required tools 1874.66 Sq.M

and techniques, and final finish as per

approved sample. Work to be completed as per

Sixty Six Paise

manufacturer’s specifications and direction of

Engineer-in-Charge.

Providing and fixing Expansion joint including Three

Dismentalling & Removing old expansion joint Thousand

by necessary equipment and tools. The Nine

expansion joint gap shall be filled by baker rod. Hundred

The polysulphide sealent shall be applied in the Seventy Eight

gap. Expansion joint belt of Size 8" Width upto Rupees And

3mm thick shall be applied with epoxi chemical Fourteen

for joint of expansion joint belt. Paise Only

Providing and fixing Expansion joint including One

Dismentalling & Removing old expansion joint Thousand

by necessary equipment and tools. The Eighty Two

expansion joint gap shall be filled by baker rod. Rupees And

The polysulphide sealent shall be applied in the Fifty Two

gap. Paise Only

WOODEN HANDRAIL : Providing and fixing a

complete wooden railing system, including all

necessary structural old members like

balusters, handrail support patti, newel posts

etc M S frame and handrail made from special

68 10 ghana teak wood, with required water based 6568.28 Rmt

PU polish and fixings, as per approved

drawings. The minimum finished dimension of

the carving hand rail wood be 4"x3". The actual

dimension and design to be taken as architect's

Providing and laying Vitrified tiles 8 to 10 mm Thousand

thick , 24'' x 24'' in flooring treads of steps and One Hundred

69 60 landing laid on a bed of 12mm thick cement 1120.36 Twenty Sq.M

mortar 1:3 (1-cement : 3-coarse sand ) finishing Rupees And

with flush pointing in white cement. Thirty Six

Providing & Fixing Single Seated sofa of size

800x750x750mm having as per instruction

given by engineer in charge/Architect. using Twenty Five

tropical seasoned hardwood and partical board Thousand Six

legs material comes in MDF wooden facia with Hundred

melemine coating comes in synthetic leather Three Rupees

with nylon polyster stiching seat and back foam And Fifty

come in 28d polyurithine slab stock foam with Paise Only

1" recron layer and bonding solution will be

Approved tender make list

Providing & Fixing Two Seated sofa of size

1800x750x750mm having as per instruction

given by engineer in charge/Architect. using

tropical seasoned hardwood and partical board

legs material comes in MDF wooden facia with

71 3 36562 Five Hundred Each

melemine coating comes in synthetic leather

with nylon polyster stiching seat and back foam

come in 28d polyurithine slab stock foam with

1" recron layer and bonding solution will be

Providing & Fixing Three Seated sofa of size

2000x750x750mm having as per instruction Fifty One

given by engineer in charge/Architect. using Thousand

tropical seasoned hardwood and partical board Three

legs material comes in MDF wooden facia with Hundred

melemine coating comes in synthetic leather Twenty Eight

with nylon polyster stiching seat and back foam Rupees And

come in 28d polyurithine slab stock foam with Twenty Paise

1" recron layer and bonding solution will be Only

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand)

73 15 1131.24 Thirty One Sq.M

or L.M. 1.1.5 laid over and jointed with grey

cement slurry including rubbing and polishing

etc. complete. (B) 30 mm thick

Acoustic Fabric paneling :

Providing and supplying Acoustical Wall

Paneling with square edges made of fibre glass

substrate 25mm thick and wrapped on the

front side with an acoustically transparent and

classified for Fire reaction Class B-s1, d1 as per

EN13501, fabric with an option of colors –

Ivory, Autumn Orange, Pista Green, Straw

Gold, Rustic Green, Burgundy, Rust, Peacock

Blue, Ash Grey, Mocha as per the choice of the Six Thousand

Architect of size 600X1200 mm providing a Three

minimum sound absorption level of 0.90 NRC Hundred

74 100 to be affixed to wall using Wall panel impalers 6388.25 Eighty Eight Sq.M

supplied and construction adhesives as per the Rupees And

instructions laid down by the manufacturer. Twenty Five

INSTALLATION:4Eachs. wall panel Impalers of Paise Only

shall be fixed to the wall surface using self

tapping screws. Silica based construction

adhesive to be dabbed on to the projecting

elements (spikes) of the impalers. wall panels

shall be pierced through the spikes of the

impalers ensuring the line and level of the

panels are maintained. Installation to be

carried out by Trained Installation team &

Installation should be carried out as per

Approved tender make list

recommended procedure. Warranty Certificate

and Test Reports for NRC and Fire rating shall

be provided by Vendor. To be fixed as per the

instructions of Engineer-in-Charge and

Polymer Modified Mortar: Providing and

supplying and applying Polymer modified

Mortar as per the design and grade suggest by

the structural consultant for concreting of

75 60 750.33 Rupees And Sq.M

beam, column, slab, pardi, slab soffit, chhajja,

balcony etc. with all necessary support system

like scaffolding , props, and other accessories

for work on it.

Wet Area Waterproofing( Toilets Sunk area) :

1.Surface Preparation include Remove all loose

material, grease, oil, dust etc. from the surface,

All Vertical pipe penetrations must be firmly

grouted. Spilled concrete or other material

should be cut back to sound concrete and

made good with suitable cementitious repair

mortar (Deucrete CWP/Brushbond or

equivalent).2 : 3 Coat Cementitious

Waterproofing System (Primer + 2 Coats)

(Deucrete CWP, Brushbond or Equivalent).2.

Whilst damp foror heavy 6-10 mm depressions,

76 120 etc. use less gauging liquid and mix to the 891.81 Sq.M

desired consistency. 3. Laying 50mm IPS

Flooring. 4. A first primer coat of waterproofing

chemical Deucrete CWP/Brushbond (or

Equivalent), mixed with water, cement and

sand in the ratio of 1:1:1 is applied to the floor

and walls. 5. After the primer coat dries, a

second coat with the ratio of 1:1:1 (Deucrete

CWP/Pidilite/ Fosroc : Cement: Sand) is applied

at an average consumption of waterproofing

material at 2 Kg/M² as per directed by Engineer

In Charge or as per recommendation of

Providing P.O.P. Punning upto 20 mm thick incl.

Jali with groove for proper bonding with wall &

77 105 652.76 Rupees And Sq.M

leveling in line & level etc. Complet as per

tender or equivalent

Providing and fixing Disabled toilet Hand Rail Thousand Six

Grab bar 300mm Long, Stainless Steel (ACN- Hundred

78 1 1101S) Grab Bar Stainless Steel(WAC-SAP- 11620.81 Twenty Pair

BG0800CSN) of approved quality as per IS and Rupees And

shall be approved by Engineer In Charge Eighty One

Approved tender make list

The work shall include design, fabrication, Twelve

supply, and installation of complete signage Thousand

consisting of laser-cut Stainless Steel (SS 304) Four

letters finished with silver/gold coating, Hundred

mounted on a suitable contrasting backing or Ninety Seven

directly on wall surface, fixed securely at the Rupees And

required height, complete as directed by the Seventy Four

Engineer-in-Charge (EIC). Paise Only

Providing and fixing False ceiling of Aerolight

light weight Calcium Silicate tiles Tegular Edge

of size 595 x 595 x 15mm densified edge,

having 100% humidity resistance and

incombustible as per BS 476 part - 4 with

thermal conductivity of 0.043 W/m0 kC, with

NRC of .50 and approved surface design to be

placed in the Grid suspended Ceiling with

border of Gypsum sheet . Grid system made of

Galvanised steel Section with main ''T'' runner

3.6 mt long with size 38 x 24 x 0.30 mm spaced

at 1200mm c/c and cross "T" of 1.2 mt long

80 30 with size 24 x 24x 0.30 mm spaced between 786.84 Sq.M

main ''T" at 600mm c/c to form a grod of 600 x

1200 mm and secondary cross "T" of length

600 mm to be inter locked at middle of the

600 x 1200 mm panel to form a grid of 600 x

600 mm. The wall angle of size 24x 24x

mm to be fixed all around the perimeter of the

wall. The main "T" runner to be suspended

from the ceiling using GI sloted cleats and

50mm long dash fasteners,4mm GI adjustable

rods with galvanised level clips with all labour

and material and as directed by Engineer

Supply and installation of a standard modular

reception table, suitable for commercial or

office use. Constructed with high-quality

MDF/particle board with a laminate or veneer Fifty Five

finish. Includes worktop, modesty panel, front Thousand

81 1 counter panel, cable management provision, 55550 Five Hundred Each

and under-desk storage (if applicable). Fifty Rupees

Dimensions: [Insert dimensions, e.g., 1500mm Only

(W) x 750mm (D) x 1100mm (H)]. Available in

standard color options [e.g., White, Walnut,

Maple]. Design can be customized to match

interior aesthetics.

Waterproofing treatment on Terrace: Providing Four

and applying Fibre reinforced Elestomeric Hundred

liquid Water proofing membrane with resilient Eighty One

Acrylic polymers having Sun Reflectivity Index Rupees And

(SRI) of 105 on Top of concrete roof in top of Ninety Eight

concrete in three coats @ 10.76 litre/10 Sq.M. Paise Only

Approved tender make list

One coat of self-priming of Elestomeric water

proofing liquid (delution with water in the ratio

of 3:1) and two coats of undiluted elestomeric

waterproofing liquid (dry film thickness of

complete application/system Eacht less than

500 microns). The operation shall be carried

out after scraping and properly cleaning the

surface to remove loose particles with wire

brushes , complete in all respect as per the

direction of Engineer-in-charge.

Providing & Placing in Position table of size Nine

1500 X 600 X 750 mm with having 1mm thick Thousand

laminate finish made from 18mm and 12mm One Hundred

83 5 BWR calibrated plywood, teakwood batten in 9171.84 Seventy One Each

cluding labour and Hardware as per Rupees And

requirements as per instruction given by Eighty Four

engineer in charge/Architect. Paise Only

Providing and fixing Kitchen sink with Premium

Stainless Steel bottle trap Carysil Elegance

Series Single Bowl , Stainless Steel 304 Stainless

Steel Coupling, Eachise Reduction Design, Deep

84 1 Bowl with Sloping Drain, 21x18x8 inches, Matt 8757.71 Each

Finish including Premium Stainless Steel Bottle

Trap Set with Waste Pipe/Outlet Pipe for

Kitchen Sink Waste Trap Drain Kit with fitting

hardware and labour work.

Kitchen Sink Cock with Extended Swinging

Spout: Providing and Fixing Single lever Deck

Mount Kitchen Sink Cock with Extended

85 1 Swinging Spout (Wall Mounted Model) With 6214.03 Each

Wall Flange, in Polished Chrome of approved

make and conforming to Manufacturers

Providing and fixing Double skin laminated

partition full or low with whole frame structure

of Aluminium extruded alloy sections with all

Anodized sections having overall partition

86 22 thickness 80 to 85 mm (double skin) flush on 3237.27 Sq.M

both sides, with no screwing or gluing etc.

visible. Panels should be 12mm thick plywood

with 1mm thick laminate sheet both side as per

approved list & selection from Architech office.

Providing and fixing Bevelled edge High Quality Thousand

Mirror of superior glass mounted on 6mm thick One Hundred

87 2 ACP sheet or plywood sheet and fixing to 3182.99 Eighty Two Sq.M

wooden pluge with C.P. brass screws and Rupees And

washers. Ninety Nine

Approved tender make list

Pantry Platform : Providing and fixing sandwich

platform with using 18mm thick granite

sandwich top & vertical support at ends, and

granite supports below top, granite patti,and Ten

front top edge moulded including joined Thousand

together with 1:4 Cement mortar beding Four

25mm thick / approved tile adhesive , to true Hundred

plane & level or to slopes,or close jointed with Seventy One

cement slurry with pigment of matching shade Rupees And

and colour and finishing with as per required Nine Paise

shape & size with finishing etc. complete as per Only

detailed drawing and The sample mock shall be

approved as instructed by from Architect/EIC.

Engineer In charge.

Carbon Dioxide(CO2) Fire Extinguisher : Supply,

Installation, Testing ,Commissioning and

keeping in good condition until project

completion carbon dioxide (CO2) fire

extinguisher user of following capacity with

89 5 necessary clamps made from 50 x 6 mm M.S. 6272.1 Each

Flat with nut & bolts grouted in wall complete.

[A] For 4.5 Kg Capacity. All the work shall be

done as per instruction given by EIC and as per

Approved tender make list with all relevant IS

ABC Type Fire Extinguisher: Supply, Installation,

Testing ,Commissioning and keeping in good

condition until project completion of ABC type

fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram

CO2 gas cartridge, powder and brackets

90 5 2690.03 Ninety Each

confirming to IS 2171 1985 and complete

erected with necessary clamps made from 50 x

6 mm M S Flat with nuts and bolts grouted in

wall complete. [A] For 6 Kg Capacity. All

product Make approved as per tender and

architect / EIC selection.

M.S. Above Ground Pipe :- Supply, Installation,

Testing ,Commissioning and keeping in good

condition until project completion of the

following sizes of flange jointed / screwed /

Butt welded, M.S. Pipes of Class C (Heavy class) One

ISI marked confirming to IS:1239 including Thousand

accessories such as MS bracket, U clamps with Five Hundred

91 10 Anchor fasteners, tees / elbows / reducers / 1533.18 Thirty Three Rmt

couplings / unions / bends / flanges / gaskets / Rupees And

Nut bolts etc., and laying on the surface Eighteen

including painting with one coat of Paise Only

anticorrosive primer and two coats of

approved red enamel paint after laying and

testing after Installation etc. as per

specifications complete as required: 100 mm

Approved tender make list

dia.All product Make approved as per tender

and architect selection.

M.S. Above Ground Pipe:- Supply, Installation,

Testing ,Commissioning and keeping in good

condition until project completion of the

following sizes of flange jointed / screwed /

Butt welded, M.S. Pipes of Class C (Heavy class)

ISI marked confirming to IS:1239 including One

accessories such as MS bracket, U clamps with Thousand

Anchor fasteners, tees / elbows / reducers / Two Hundred

92 35 couplings / unions / bends / flanges / gaskets / 1242.81 Forty Two Rmt

Nut bolts etc., and laying on the surface Rupees And

including painting with one coat of Eighty One

anticorrosive primer and two coats of Paise Only

approved red enamel paint after laying and

testing after Installation etc. as per

specifications complete as required: 80 mm

dia.All product Make approved as per tender

and architect selection.

M.S. Above Ground Pipe

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of the following sizes of flange

jointed / screwed / Butt welded, M.S. Pipes of

Class C (Heavy class) ISI marked confirming to

IS:1239 including accessories such as MS Eight

bracket, U clamps with Anchor fasteners, tees / Hundred One

93 45 elbows / reducers / couplings / unions / bends 801.44 Rupees And Rmt

/ flanges / gaskets / Nut bolts etc., and laying Forty Four

on the surface including painting with one coat Paise Only

of anticorrosive primer and two coats of

approved red enamel paint after laying and

testing after Installation etc. as per

specifications complete as required: 50/65 mm

dia.All product Make approved as per tender

and architect selection.

M.S. Above Ground Pipe

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of the following sizes of flange

jointed / screwed / butt welded, M.S. Pipes of

Class C (Heavy class) ISI marked confirming to Three

IS:1239 including accessories such as MS Hundred One

94 42 bracket, U clamps with Anchor fasteners, tees / 301.99 Rupees And Rmt

elbows / reducers / couplings / unions / bends Ninety Nine

/ flanges / gaskets / Nut bolts etc., and laying Paise Only

on the surface including painting with one coat

of anticorrosive primer and two coats of

approved red enamel paint after laying and

testing after Installation etc. as per

specifications complete as required: 25/32/40

Approved tender make list

mm dia. All product Make approved as per

tender and architect selection.

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project Seven

completion of GM Single headed oblique type Thousand

Hydrant valve (Internal & External) with Two Hundred

95 3 instantaneous gun metal cuplings of 63/ 80 7259.38 Fifty Nine Each

mm dia with cast iron wheel ISI marked Rupees And

conforming to IS 5290 (Type-A) with blank pvc Thirty Eight

cap and chain as required.All product Make Paise Only

approved as per tender and architect selection.

Supply, Installation, Testing ,Commissioning Five

and keeping in good condition until project Thousand

completion 63 mm dia, 2x15 Mtrs. long RRL Four

Hose Pipe with 63 mm dia male & female gun Hundred

metal couplings duly binded with GI wire, rivets Forty Seven

etc. conforming to IS 636 (type-A - RRL) as Rupees And

required.All product Make approved as per Forty Four

tender and architect selection. Paise Only

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of Fire Hose Cabinet of size

750mmx600mx250mm fabricated from 16 swg

thick MS sheet with 6mm thick glazed hinged Six Thousand

type centre opening doors having locking Ninety Seven

97 2 arrangement suitable for accommodating 2 6097.88 Rupees And Each

Eachs RRL hose pipes, 1 Each. Eachzzle, branch Eighty Eight

pipe & painting with two coats of anti-corrosive Paise Only

primer and two coats of approved red enamel

paint etc. complete as required.All product

Make approved as per tender and architect

Supply, Installation, Testing ,Commissioning Two

and keeping in good condition until project Thousand

completion of 63 mm GM Branch Pipe with Four

20mm GM Eachzzle conforming to IS:903, Hundred

suitable for instantaneous connection to Four Rupees

interconnect hose pipe coupling as required.All And Thirty

product Make approved as per tender and One Paise

architect selection. Only

Supply, Installation, Testing , Commissioning

and keeping in good condition until project

completion of First- Aid Hose Reel equipment

with M.S. construction spray painted in post

office red, conforming to IS:884 with up to date

amendments, complete with the following as

99 2 11522.08 Twenty Two Each

(a) 36 m. long, 25 mm dia. water hose

thermoplastic (Textile reinforced) Type-2 as per

(b) 25 mm dia gun metal globe valve & Eachzzle

(c) Drum and swinging type fixing brackets on

Approved tender make list

(d) Connections from riser with 25 mm dia.

Gun metal ball valve.All product Make

approved as per tender and architect selection.

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of Cast Iron Four Way Fire Brigade Ten

Inlet having 04 gunmetal 63mm male Thousand

instantaneous inlets conforming to IS:903, Five Hundred

100 2 fitted with Eachn-return valves, flange outlet 10534.81 Thirty Four Each

280mm OD, 240mm PCD, eight holes of 22mm Rupees And

dia complete with 04 PVC blank caps and Eighty One

chains with accessories complete as Paise Only

required.All product Make approved as per

tender and architect selection.

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of Gun Metal Air Release Valve

101 3 1242.81 Forty Two Each

with necessary fittings. Size: 25 mm (For Riser)

All product Make approved as per tender and

architect selection.

Providing, fixing AUTO GLOW photo

luminescent Signage's as per IS standard in Five Hundred

Block / Small Letters on rigid sheet with Fifty Seven

102 25 necessary wall or Ceiling fittings as Specified 557.52 Rupees And Each

Sizes: Fire Equipment: 4" x 12"& 8"X8" .All Fifty Two

product Make approved as per tender and Paise Only

architect selection.

Providing and Supplying ISI Mark CI D/F Three

Butterfly Valve as per IS:13095 of PN 1.6 and Thousand Six

100 mm diameter including all taxes, Hundred

103 1 insurance, transportation, freight charge, 3611.1 Eleven Each

octoroi, Inspection Charge,Loading-Unloading, Rupees And

Conveyance to Departmental Store, Stacking Ten Paise

rtc. Complete Only

Providing and Supplying ISI Mark CI D/F Three

Butterfly Valve as per IS:13095 of PN 1.6 and Thousand

80 mm diameter including all taxes, insurance, Three

104 2 transportation, freight charge, octoroi, 3357.9 Hundred Fifty Each

Inspection Charge,Loading-Unloading, Seven Rupees

Conveyance to Departmental Store, Stacking And Ninety

rtc. Complete Paise Only

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project Four

completion of Pressure Switches for Thousand

automation of fire pumps. Pressure switches One Hundred

105 1 shall be double pole single throw type suitable 4146.56 Forty Six Each

for single phase supply with diaphragm. Rupees And

Aluminum Enclosure with IP 66 protection, Fifty Six Paise

cable connection to pressure switch to control Only

panel & other accessories as required. All

Approved tender make list

product Make approved as per tender and

architect selection.

Supply, Installation, Testing ,Commissioning

and keeping in good condition until project

completion of Electric driven main fire pump

(Hydrant Pump) suitable for automatic

operation and consisting of following:

complete in all respect as required.

a) Horizontal, centrifugal, end suction pump to

ensure a minimum pressure of 3.5 kg / sq.cm.

at highest and farthest outlet at specified flow

of 1620 lpm at 45 m. head conforming to IS

b) Squirrel cage induction motor with suitable

106 1 100469.8 Sixty Nine Each

40 HP with synchronous speed 1500 RPM,

Suitable for operation on 415 volts, 3 phase

Hz. AC with IP 66 protection for enclosure,

horizontal foot mounted type with Class-F

insulation, Conforming to IS standards.

c) Common Base plat for Pump and motor and

coupling, coupling guard, vibration pad, cables

and other accessories as required for complete

Installation of pump set. All the work shall be

done as per instruction given by EIC and as per

Approved tender make list with all relevant IS

Supply, Installation, Testing and commissioning

of Quartzoid Bulb type Sprinkler Heads. a)

107 36 580.75 Rupees And Each

Pendent Sprinkler 57°C - K-80 - standard

response - UL listed

Electrical Work

Replacing old & u/s by New Point wiring for

Light / Bell with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand

copper wires, in below type of pipe erected

with 6A Modular type switch / bell push &

accessories and earth continuity of following Rupees Four

type, erected on PVC / Metallic/Wooden box, Hundred Ten

single mounting base frame covered with And Paise Six

textured/metallic front plate modules erected Only

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(e) in existing pipe erected flushed on

wall/ceiling complete.

Cat. III(As per requirement)

Approved tender make list

Point wiring for Tissino / Modular secondary

light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be Rupees One

erected complete with earth continuity and Hundred

necessary connection with primary light with Twenty And

accessories erected on Metal / PVC / wooden Paise

box covered with 3 mm thick Nineteen

PC(Polycarbonate) / Acrylic sheet for open / Only

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed.(j) in

existing pipe erected concealed in wall/ceiling

Replacing old & u/s by New Providing following

type of Modular Type Accessories mounted

with pvc / metallic/Wooden box, single Rupees One

mounting base frame covered with textured / Hundred Fifty

110A 420 metallic front plate , modules erected with 151.5 One And Each

necessary connection. As desired by Engineer Paise Fifty

(As per requirement and as per sample) (1)One

No. SP 6 Amp. Cat.III

110B 420 .----do----.(2) One No 5 pin plug Cat.III 151.5 One And Each

110C 200 .----do----.(9) 16 Amp. SP one way switch. Cat.III 180.79 Eighty And Each

.----do----.(10) 6/16Amp. Universal socket Ninety Nine

Cat.III And Paise

.----do----.(13) 6A/10A/16A/20A/25A/32A Hundred Ten

Single pole Modular MCB Switch Cat.III And Paise

.----do----.(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Hundred Ten

Double Pole Modular MCB Switch Cat.III And Paise Six

Replacing old & u/s by New Providing & Rupees

erecting following type of Modular Type Twenty

111A 25 Accessories with necessary connection. As 27.27 Seven And Each

desired by Engineer In charge (1) 6 Amp. SP Paise Twenty

one way switch Seven Only

Approved tender make list

111B 20 .----do----.(2) 16 Amp. SP one way switch 51.51 Each

111C 20 .----do----.(3) 6/16Amp. Universal socket 82.82 And Paise Each

111D 20 .----do----.(4) 6 A socket 42.42 Each

Replacing old & u/s by New Providing and

erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary

112A 1800 24.24 And Paise Mtr

PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (a)

Replacing old & u/s by Providing & erecting Rupees

PVC Corrugated Flexible Conduit with required Seventeen

113 80 nos. of coupling, PVC bushes, Check-nuts etc. 17.17 And Paise Mtr.

complete of following sizes. Seventeen

Replacing old & u/s by Supplying and laying

UPVC cable trunking system comprising Rupees Two

unplasticised polyvinyl, chloride rigid material Hundred

with ignition free and flame proof confirming Seventy

BS with necessary end caps Internal and Seven And

external bend, flat bends, coupler, tee etc..All Paise Seventy

necessary accessories and measuring of Five Only

following sizes (1) 75 mm x 50 mm trunking

114B 30 .----do----.(2) 100 mm x 50 mm trunking 428.24 Mtr.

Approved tender make list

Supplying under floor pregalvanised corrosion

proof rectangular sheet steel cable trunking of

1.6 mm thick having with stand point load up

to 1.33 Ton & free from seepage of concrete of Rupees Two

screed water with all accessories,Junction Hundred

Box,Joints as required and demanded by Ninety Seven

engineer-incharge and laying/erecting as per And Paise

OEM guidelines and as per instruction of Ninety Five

engineer incharge having following size of Only

dimensions and No of compartments (W x D x

T) Cat-III [1] 50mm x 25mm x 1.6 mm with One

.----do----.[2] 75mm x 25mm x 1.6 mm with Seventy

One Compartment Seven And

Replacing old and u/s by Mains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of

pipe to be erected concealed in /flushed on

116A 90 46.46 Six And Paise Mtr

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size. (e)

in existing pipe (a) 2 wire 1.5 sq. mm

.----do---.(e) in existing pipe (b) 2 wire 2.5 sq. Two And

Replacing old and u/s by Mains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with

117A 600 86.86 And Paise Mtr.

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size

(e) in existing pipe (a) 2 wire 4 sq. mm

117B 100 .----do---.(e) in existing pipe (b) 2 wire 6 sq. mm 121.2 Twenty One Mtr.

117C 800 .----do---.(e) in existing pipe (h) 4 wire 6 sq. Mm 240.38 Forty And Mtr.

Supplying and erecting Flexible PVC insulated Rupees

118 300 multistrand multicore 1.1 kv grade ISI marked 77.77 Seventy mtr

copper wires of following size to be erected as Seven And

Approved tender make list

directed.(As per requirement) Paise Seventy

h) 2.50 Sq.mm 3 core round PVC sheathed Seven Only

Providing & Erecting 3mm thick Polycarbonate

119 20 3.03 And Paise Sq.Inch

(PC) sheet with grooving as directed

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following items in single board erected on PVC

/ Metal/Wooden board with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as

120 5 1133.22 Thirty Three Each

1 no. 6A/16A universal plug-switch combined.

4 nos. 6A Switch

4 nos. 6A 3/5 pin Plug [B] For Modular Type

Accessories. Cat. III (As per requirement)

Supplying & erecting Approved make call bell

indicator with buzzing sound and Red light

121 2 indicating lamp with Red light button to attend 148.47 Each

the call suitable for 240 v 50 c/s supply to be

erected.(As per requirement)

Decorative call bell Ting-tong box type

122 3 71.71 And Paise Each

volts complete erected(As per requirement)

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to

123 8 6173.12 Seventy Each

work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S. housing. (As per requirement and as

per sample) ICS=100% of ICU only Cat III

(Make- L&T, ABB, Schneider, Siemens)

Providing and erecting Approved make Four

pole moulded case circuit breaker having Rupees

breaking capacity ICU of 50 KA and above at Twenty Five

415 V having Normal current rating 400A. Thousand

with variable Thermal & magnetic release Two Hundred

suitable to work on A.C.supply 50 c/s. With all Twenty Eight

internal connections, spreader tinned copper & And Paise

complete erected in existing 16 G.M.S. housing. Seventy Nine

ICS=100% of ICU only Cat III (Make- L&T, ABB, Only

Schneider,Siemens)

Replacing old & u/s by New providing and

erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C.

125 90 112.11 Twelve And Each

system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III (As per

Approved tender make list

requirement and as per sample) (Make- L&T,

ABB, Schneider , Siemens)

Replacing old & u/s by new Providing &

erecting 415 V MCB Four Pole for Motor & Rupees Seven

Inductive Load (C Curve) having 10KA breaking Hundred

126 5 capacity & confirms to IS :8828 in existing box 737.3 Thirty Seven Each

having following capacity (old-2) And Paise

(c)63 Amp. Cat-lll (Make- L&T, ABB, Schneider , Thirty Only

Providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip

127 1 5415.62 Hundred Each

220V AC. with all internal connections &

complete erected in existing M.S.housing..(3)

250 A -400 A , CT Ratio 1/400 , CT Ratio 1/200

(Make- Multispan ELR35, Selec 900ELR or its

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of

128 15 quick action & tripping with all advance feature 2235.13 Each

& do not incorporate any electronic

component. for following Max. rating erected

as directed (As per requirement)

(ii) 40Amps. DP Cat. III (Make- L&T, ABB,

Schneider, Siemens)

Providing & erecting 415V MCB Four Pole Rupees Six

Switch for Lighting Load (B curve) having 10KA Hundred

breaking capacity & confirms to IS :8828 in Sixty Eight

existing box having following capacity(ii) And Paise

40Amps. FP Cat. III(Make- L&T, ABB, Sixty Two

Schneider, Siemens) Only

Replacing old & u/s 3phase 4 way DB board by

newProviding and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

130 7 3412.79 Hundred Each

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door(iii)8 way

Approved tender make list

Providing and erecting busbar chamber

confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door

with rubber gasket and necessary busbar

supports with COPPER busbar having current

density not more than 1.6 Amp. / sq.mm

131 1 (Rated current / cross section area) duly 10341.39 Rnmtr

wrapped with colour insulation tape for phase

sequence, three phase & neutral each suitable

for following current capacity with necessary

painting mounted on wall or pedestal frame of

required size with necessary connections.(D)

Suitable for 400 Amp. capacity

Providing , erecting , fabricating the M.S.

structure as per requirement on site

incorporating proper size of M.S. angles, flats, Rupees

bars, channels, sections complete with cutting, Seventy

132 60 welding, grinding & finishing duly painted with 77.77 Seven And K.G

one coat of red oxide with erection on site as Paise Seventy

per direction of engineer in charge with Seven Only

necessary grouting, cementing, plastering &

finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI Thousand

armoured cable multistrand Copper conductor Four

for 1.1 KV. to be laid on wall with necessary Hundred

clamps or in existing trench / pipe at road Twenty Six

crossing or floor of following size of cables.(F) And Paise

3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Sixty Three

Replacing old and U/s by New Providing and

erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to

134A 200 be laid on wall with necessary clamps or in 987.78 Mtr

existing trench / pipe at road crossing or floor

of following size of cables. (B) 4 core 16 Sq.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of following Rupees

size evenly crimped with high pressure tool & Twelve And

connected to switchgear terminals with Paise Twelve

brass/cadmium plated nut bolts in an approved Only

manner. (C) 16 Sq.mm.

Approved tender make list

135C 20 .----do----. (F) 70 Sq.mm. 27.27 Seven And Each

135E 20 .----do----. (H) 120 Sq.mm. 56.56 Six And Paise Each

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

136A 8 insulated armoured cable complete with out 47.47 Each

going tails, insulating tape etc for following size

of cables. (D) 2 to 4 core 16 Sq. mm

136B 6 .----do----. (E) 2 to 4 core 25 Sq. mm 51.51 Each

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

137 2 140.39 Forty And Each

cable complete with out going tails, insulating

tape etc for following size of cables.(E) 3 & 1/2

core 120 Sq. mm

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

138A 15 erected in existing pipe of following size 300.98 Mtr

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required. .(i) One wire 35.00 sq. mm

138B 15 .----do----. (j) One wire 50.00 sq. mm 470.66 Seventy And Mtr

Paise Sixty Six

Approved tender make list

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

outdoor type double door cubical panel board

necessary IP-54 and above protection as per

approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

139 2.5 charge with erection of supplied switch gears, 11466.53 sq.mtr.

BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with

epoxy powder coating. (A) locally fabricated

panel board (i) with 350 mm depth

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit

140 4 test certificate including value of earth 4591.46 Each

resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain

moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in

Approved tender make list

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing & erecting L.T. Current Transformer

with bar primary 50/5 to 1000/5 ratio 15 VA

141 3 burden erected in existing CRCA box duly 274.72 Each

secured with insulating materials connected to

Supplying and erecting Ammeter / Voltmeter Hundred

selector switch for 3 phase AC Supply 500 V on Seventeen

existing panel board with necessary And Paise

connections. Fourteen

Supplying and erecting approved make suitable

143 3 panel indicator LED type lamp, lens cover, 43.43 Each

complete erected with necessary connections.

Providing and fixing approved make Perforated

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall Rupees Four

be coated with hot dip galvanizing as per IS Hundred

144 180 2629/4759. with max 17.5% perforation with 424.2 Twenty Four Mtr

coupler plate / Fish plate and GI hardware like And Paise

nut - bolt and washers etc. erection with Twenty Only

necessary support( included) as per

Specification and as per instruction of engineer

in charge.(3) 150 X 50 X 1.6 mm Thick

Providing and fixing approved make 'T' Junction

for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as

per IS 2062/1079 and shall be coated with hot

dip galvanizing as per IS 2629/4759. with max

145 4 17.5% perforation with coupler plate / Fish 184.83 Each

plate and GI hardware like nut - bolt and

washers etc. erected on existing support as

per Specification and as per instruction of

engineer in charge of following size(3) 150 X

Providing and fixing approved make '90° Elbow'

for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as Rupees One

per IS 2062/1079 and shall be coated with hot Hundred

dip galvanizing as per IS 2629/4759. with Sixty Three

coupler plate / Fish plate and GI hardware like And Paise

nut - bolt and washers etc. erected on existing Sixty Two

support as per Specification and as per Only

instruction of engineer in charge..(3)150 X 50 X

1.6 mm Thick 90° Elbow

Approved tender make list

Providing and fixing approved make 'Cross over

Junction' for Perforated C type cable tray.

Made from sheet steel. The Junction should be Rupees Two

bended as per IS 2062/1079 and shall be Hundred

coated with hot dip galvanizing as per IS Forty Four

2629/4759. with max 17.5% perforation with And Paise

coupler plate / Fish plate and GI hardware like Forty Two

nut - bolt and washers etc. erected on existing Only

support as per Specification and as per

instruction of engineer in charge..

Replacing old various types of fixtures by new

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

THD < 15 %, Rupees Seven

CCT 3000 K to 6500K, Hundred Fifty

148A 64 Luminaire efficacy> 85 lumens/watt , 758.51 Eight And Each

LED driver efficiency > 85 % Paise Fifty

( fitting required LM-79 & LM-80 One Only

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges

shown.)(This LED fittings shall be compatible

with Digital Addressable Lighing Interface

(DALI) or KNX system)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips

complete.IP20(iv) 22-24 watts, Surge-2 KV Cat-

.----do----. (F) Spot Light 425 Lumens, Surge- Hundred

2KV (ii) 8 to 11 Watts Cat-lll Sixty Seven

.----do----. (I) Adjustable spot light with COB led Hundred

148C 24 having aluminium reflector of following 966.57 Sixty Six And Each

wattage(ii) 12 Watts Cat-lll Paise Fifty

Approved tender make list

.----do----. (D) LED Strip Light (ii) Minimum

148D 60 7.2W -240 LED per meter,(2 wire, IP-65) with 220.18 Mtr

non integral suitable Driver complete Cat-lll

Providing and erecting Galvanise iron floor Thousand Six

mounting height adjustable junction box Hundred Fifty

149 10 having size of 150x150x65-90 mm.The junction 3655.19 Five And Each

box includes a base, flyovers, lid and disposable Paise

cover protection. Nineteen

Providing and erecting Galvanise iron floor

mounting height adjustable junction box

having size of 300x300x65-90 mm.The junction

box includes a base, flyovers, lid and disposable

150 5 5866.08 Hundred Each

cover protection.

Make Shall be as per demand of concern

department or as approved by Executive

Supply,Installation,Testing, and commissioning

of 1.5sqmm x 2 Core FRLS Armoured red

coloured cable.

151 575 102.72 And Paise Mtr

Make Shall be as per demand of concern

department or as approved by Executive

Providing and erecting Inverter based

approved make Cassette type split air-

conditioning unit consisting of condensing unit

with fan motor, hermetically sealed

scroll/rotary compressor with accessories etc.

duly connected separately erected evaporating

152 15 unit and blower motor with its accessories by 131862.6 Each

Eco friendly Green gas charging & Internal

copper wiring & Remote control ( 3 star and

above of current year) with necessary core

cutting.This Cassette type split air-conditioning

unit shall be compatible with proposed VRV

System (C) for 3 ton capacity- 1/3Phase

Rigid UPVC drain pipe of 10 Kg/cm2. rating with Eighty Seven

153A 30 9 mm thick.nitrile rubber insulation. 87.87 And Paise Rmtr

(C.) 32mm dia. Eighty Seven

Supplying and erecting insulated pair of soft

154 240 965.56 Hundred Rmtr

copper tubing open or concealed including

Approved tender make list

power and control cable,necessary PVC drain Paise Fifty Six

pipes for Split AC machine up to 4 TR capacity Only

carry out RCC Core cutting- up to 100 mm

dia./200mm thick Wall/beam/slab with

155 10 1199.88 Ninety Nine Job

providing PVC pipe of 3 mm thick inside and

necessary finishing on both ends of wall .

Supply, Installation, testing and commissioning

of Digital Conference Control unit /Server.

Should have minimum 3 x Conference Network

Ports (RJ45) or better, 1 x LAN Port, 1 x

Balanced XLR audio input, 1 x Balanced XLR

audio output or more, Should have internal /

External Conference recording capablity,

Camera Control integration capability. Rupees Four

Controller Must have Dante / AES67 interface. Lakh(s) Fifty

Power supply should be from same Four

OEM.Server Should be able to drive Thousand

chairman/delegate units mentioned in the Five Hundred

tender with the help Extension unit and power Only

supply unit. Intel® Core™ i7-12700 Processor

(2.1 GHz, up to 4.9 GHz w/Boost, 25 MB cache,

12 core, 65W), 16 GB (2 x 8 GB) DDR5-4800

SODIMM Memory, 256 GB PCIe 4x4 2280 Value

M.2 SSD, 2x 1 Gbps Ethernet adapters.

Certification: CE. Approved Makes: Televic/

Brahler/ Marconi technology/ DPA

Supply, Installation, testing and commissioning

of Network Extender supports redundant loop

cabling. It shall be possible to daisy chain and Rupees One

loop several network extenders on the Lakh(s)

conference controller. It shall be possible to Seventy Nine

157 1 loop Chairman/Delegate units between several 179780 Thousand Set

network extenders to create redundancy on a Seven

network extender level ,Network Extender is Hundred

powered via the external power.Certification: Eighty Only

CE. Approved Makes: Televic/ Brahler/ Marconi

technology/ DPA

Supply, Installation, testing and commissioning

of Power supply for conference units. Power

supply should be able to provide power to the

158 1 181800 Thousand Set

Chairman/delegate units mentioned in the

tender. Approved Makes: Televic/ Brahler/

Marconi technology/ DPA

Approved tender make list

Supply, Installation, testing and commissioning

of Conference management software. Software

should allowe user to Log in as Technician,

Operator or Chairperson. Each page of the

software should be Password

protected.Interface with 8x8 multichannel USB.

Software should allow user to Create new

custom configurations, Activate a prepared

audio configuration, Change audio routing

159 1 presets via API, Edit, duplicate and delete a 222200 Each

configuration. Software should support Roles

such as Operator and Chairperson are

introduced, empowering designated individuals

to manage discussions effectively. Software

should support Dante / AES67 interface.These

roles allow users to control who speaks,

oversee speaker and request lists. Approved

Makes: Televic/ Brahler/ Marconi technology/

Supply, Installation, testing and commissioning

of Moduler / Singal plate Flush Mount

Chairman Discussion Unit with removable

Gooseneck microphone. Microphone lenght:

360mm or better. Microphone must have led

indicator. Microphone Should have USB-C port

Connection /Mini USB/ Screw lock 5-Pin/ Din- Rupees Sixty

Pin conncetor. Chairman Discussion Should Eight

have built-in Digital Signal Processing. Unit Thousand

should provide Priority to speak to chairman Five Hundred

.Priority button silences all delegate Seventy

microphones and allows only the chairperson Seven And

to speak. Audio quality : 16 bit digital or Paise Ninety

better.Connectivity: Concealed conference bus Nine Only

connections, 2 x RJ 45 ethernet port (IN/OUT -

interchangeable), Loop through, daisy-chain

cabling (non-proprietary).Compatible screw

lock microphone connectivity. Certification: CE;

BIS. Approved Makes: Televic/ Brahler/

Marconi technology/ DPA

Supply, Installation, testing and commissioning

of Moduler / Singal plate digital Flush Mount

Delegate Discussion Unit with removable

gooseneck microphone. Microphone lenght: Rupees Sixty

360mm or better. Microphone must have led Four

indicator. Microphone Should have USB-C port Thousand Six

161 96 Connection /Mini USB/ Screw lock 5-Pin/ Din- 64690.5 Hundred Each

Pin conncetor. Delegate Discussion should have Ninety And

built-in Digital Signal Processing. Unit with Paise Fifty

Microphone On / Off Button. Audio quality : 16 Only

bit digital or better.Connectivity: Concealed

conference bus connections, 2 x RJ 45 ethernet

port (IN/OUT - interchangeable), Loop through,

Approved tender make list

daisy-chain cabling (non-proprietary).

Certification: CE; BIS. Approved Makes: Televic/

Brahler/ Marconi technology/ DPA

SITC of of CAT6 Cable required for Conference

162 1 system. Approved Makes: Televic/ Brahler/ 121200 Set

Audio Technica/ DPA

Replacing old and u/s projector with scrren by

new SITC of 4K 98" Android 14 Professional

Display, Display Resolution should be 3840 x

2160 (UHD-4K) & Brightness should be 600 nits

or higher. Contrast ratio 15000:1 or better.

Display should have 1mm ultra-thin bezel, and

should support High Dynamic Range. Display

shoud have input ports: HDMI In 2.0 x 1 (ARC), Rupees Five

HDMI in 2.0 x 2, USB-A 2.0 x 1,USB-A 3.0 x Lakh(s) Sixty

1,LAN In (RJ45) x 1,AV In x 1 & output port: Five

S/PDIF Out x 1, Audio Output (Jack 3.5 mm) x 1. Thousand Six

Display should have 4GM RAM & Storage: Hundred

16GB. Display should support Wi-Fi/ Bluetooth. Only

Display should have refresh rate: 120Hz or

better. Display should support 24x7 Operation.

Display should have 2 x 15W Speakers. Viewing

Angle: 178 deg. Display should support wireless

casting. Should support digital signage.

Approved Makes: Newline / Samsung / Sony /

Supply, Installation, Testing & Commissioning

164 3 of Floor mount stand with adjustable height 10605 Each

and angle. Approved Makes: Custom

Supply, Installation, Testing & commissioning

of4K 55" Android 11 Display, Display Resolution

should be 3840 x 2160 (UHD-4K) & Brightness

should be 450 nits or higher. Contrast ratio

15000:1 or better. Display should have 1mm

ultra-thin bezel, and should support High

Dynamic Range. Display shoud have input

ports: HDMI In 2.0 x 1 (ARC), HDMI in 2.0 x

USB-A 2.0 x 1,USB-A 3.0 x 1,LAN In (RJ45) x

165 1 54540 Thousand Each

1,AV In x 1 & output port: S/PDIF Out x

Audio Output (Jack 3.5 mm) x 1. Display should

have 2GM RAM & Storage: 16GB. Display

should support Wi-Fi/ Bluetooth. Display

should have refresh rate: 120Hz or better.

Display should support 24x7 Operation.Display

should support wireless casting. Should

support digital signage. Approved Makes:

Newline / Samsung / Sony / Planner

Approved tender make list

Replacing old and u/s by new Supplying,

installation, testing and commissioning of

Passive Multiple Driver Column Array

Loudspeaker, Driver Size : Minimum 16 x 3" or

better, Impedance : 8 Ω or better, Sensitivity : Rupees One

95 dB or better RMS Cont Power : 325 Lakh(s)

W@8Ohms or better, RMS Cont Programm Ninety

166 2 Power : 650 W@8Ohms or better, Peak Power : 190890 Thousand Each

1200 W@8Ohms or better, Speaker should Eight

support 70/100V line operation Maximum SPL : Hundred

Peak - 126dB or better, Dispersion: 140 (H) / Ninety Only

15( V) degrees, Frequency Range : 120 Hz –

KHz or better, Enviroment Condition : IP54 or

better.Approved Makes: Biamp/ Fohhn

Audio/D&B/L-acoustics

SITC Pan & Tilt Brackets for Speakers. Approved Thousand Six

Makes: Custom Hundred Five

Supply Installation Testing and Commissioning

of Fixed I/O DSP with 12 analog inputs ,

analog outputs, 8 channels configurable USB

audio.128 x 128 channels of AVB.Signal

processing via intuitive software allows

configuration and control for signal routing,

168 1 399401.5 Four Each

mixing, equalization, filtering, delay and much

more. Frequency Response: 20Hz-20Khz,

THD+N < 0.006%, Dynamic Range > 108dB. RS-

232 serial port.4-pin GPIO. CE marked, UL

listed, and RoHS compliant. Approved Makes:

Biamp/ Symetrix /L-Acoustics

Supplying, Installation, testing and

commissioning of 2-channel 1200Watt class D

Power amplifier with DSP, AVB,Dante, AES67

support. Amplifier Should supports both

selectable impedance (4Ω, 8Ω, 70V, or 100V)

per channel. Amplifier Should support flexible

power sharing. THD 20Hz-20kHz at 1 W <

0.008%.Signal-to-Noise Ratio >103 dB.Crosstalk

at 1 kHz -70 dB. Frequency Response : 20 Hz -

20 kHz or bettter.. DSP Features: Group

169 1 338350 Thousand Each

control with Raised Cosine MESA EQ

asymmetric filters,Peak and RMS

limiters,Support Multiple make Speaker

presets. Protection Features:Current Average

Limiter (CAL), Very High Frequency Protection

(VHF), Direct Current Protection (DC), Short

Circuit Protection, Current-Clip Limiter, Voltage

Clip Limiter, Temperature protection.

Approved Makes: Biamp/ Fohhn Audio/D&B/L-

Approved tender make list

Supply, Installation, Testing and Commissioning Rupees One

of Master AV Controller with 3 bidirectional RS- Lakh(s)

232/IR ports, 2 unidirectional RS-232/IR ports, Seventy Six

4 built-in assignable relays, 8 GPIO for control Thousand

170 1 of relays, switches, and sensors, 10 LAN control 176911.6 Nine Each

port. Controller should be POE powered. Hundred

Should be CE marked, UL listed, and compliant Eleven And

with the RoHS directive. Approved Makes: Paise Sixty

Biamp/ Symetrix /Extron Only

Supply, Installation, Testing & Commissoning of

10” capacitive LCD touch Panel. Touch panel

should have Scratch-resistant glass. Should

support Customizable user interface to fit

customers’ control requirements. Screen turns

171 1 on automatically as someone approaches. 257550 Each

Display brightness can adjust automatically to

the ambient light level. Should be PoE

powered. Should be s CE marked, UL listed, and

compliant with the RoHS directive. Approved

Makes: Biamp/ Symetrix /Extron

Supply, Installation, Tesing and Commissioning

of network switch. (16 x 1G PoE+, 2x 1G, 2x

SFP); PoE Ports / Budget : 16 PoE+ (30W/port),

300W Budget; Jumbo Frame Support : Yes, up

to 12kb; Common Layer 2 and Layer

switching engine; Fully featured L2/L3/L4

172 1 platform for midsize Enterp; Standard or 186850 Each

recessed mounting with all ports in the back, or

all ports in the front; Dedicated AV web-based

GUI interface for more specific AV installations;

Dante, Q-SYS, AES67 and AVB audio profiles

and Dante video profiles. Approved Makes:

Netgear/ D- Link/ Cisco

SITC Of 4 x 8 HDMI Switcher with 8 HDMI input

and 4 HDMI + 4 HDBaseT output allowing the

connection of 4 HDMI sources to up to

displays.Video resolutions up to 4K@60Hz (YUV Rupees Two

4:4:4) on all HDMI & CAT ports. HDMI 2.0b and Lakh(s) Sixty

HDCP 2.2/1.x compliant. HDMI ports support Five

18Gbps lossless compressed video bandwidth. Thousand

173 1 HDR, HDR10, HDR10+, Dolby Vision & HLG. 265882.5 Eight Each

HDbaseT output can extend the transmission Hundred

distance up to 230ft/70m via a single CAT6 Eighty Two

cable. Advanced EDID management and CEC And Paise

control. One-way IR matrix function. Control Fifty Only

via front panel buttons, IR remote, RS-232, LAN

and Web GUI. Approved Make :-

Crestron/Extron/DVDO/Kramer

SITC Of 4K/UHD HDMI Over HDBaseT RX with

Ethernet, Control, and PoE : 4K/UHD@60 Hz

174 4 25250 Twenty Five Each

with 4:4:4 chroma subsampling @70meter or

higher , HDCP 2.2 compliant. Inputs: 1 x IR IN

Approved tender make list

[3.5mm Stereo Mini-jack] / 1 x CAT port [RJ45] Two Hundred

Output: 1 x HDMI Type A. Approved Make :- Fifty Only

Crestron/Extron/DVDO/Kramer

SITC of 4K/UHD HDMI & USB-C 70m Wall Plate

Extender over HDBaseT with USB. Video

resolutions 4K@60Hz 4:4:4. Supports HDMI

and USB-C (Av input & Charging).USB2.0

extension with Receiver Compliant with HDMI

2.0b, HDCP 2.2 and DisplayPort 1.2a. Supports Rupees One

18Gbps video bandwidth.Supports HDR10 and Lakh(s) Thirty

HDR10+. Audio formats support Dolby® Atmos, Six Thousand

TrueHD, Digital+, Digital; DTS X, HD Master Three

Audio, HD High Resolution Audio, 5.1; PCM 2- Hundred Fifty

8Ch. Input selection supports automatic mode Only

and manual mode. Receiver should be

remotely powered via PoE. Receiver should

have 1x HDBaseT in, 1x HDMI IN, 1x HDMI out,

2x USB2.0. Approved Make :-

Crestron/Lightware/DVDO/Kramer

Supplying and Laying of 16 AWG 2 Core Hundred

176 100 Speaker Cable. Approved Makes: Belden/ 146.45 Forty Six And Mtr

krystal/ Sommer Paise Forty

3 feet 4K HDMI Cables. Approved Makes:

177 12 3535 Five Hundred Each

Extron/ Sommer/ Biamp

6 feet 4K HDMI Cables. Approved Makes:

178 8 5555 Five Hundred Each

Extron/ Sommer/ Biamp

30 feet USB 3.0 Cable as per site requirement. Thousand

Approved Makes: Extron/ Sommer/ Biamp Seven

3 feet USB 3.0 Cable as per site requirement.

180 4 4545 Five Hundred Each

Approved Makes: Extron/ Sommer/ Biamp

3 feet USB C Cable as per site requirement.

181 3 6565 Five Hundred Each

Approved Makes: Extron/ Sommer/ Biamp

Approved tender make list

Supply and Laying of 24 AWG 4-Pair Unshielded Eighty Five

182 300 CAT6 (U/UTP) Cable. Approved Makes: Belden/ 85.85 And Paise Mtr

krystal/ D-Link/Biamp Eighty Five

Supply of 2 core shielded Microphone Cable as Hundred

per technical specifications etc. as required. Eighteen And

Approved Makes: Belden/ krystal/ D- Paise

Link/Biamp Seventeen

Supply and fixing of 24 U Equipment Rack for

housing all rack mountable equipments with Rupees Sixty

internal wiring, front glass door; heat Six Thousand

dessipation fans; movement wheels, power Six Hundred

distribution units etc. Approved Makes: Sixty Only

Valrack/ Rittal/ APW

Supply, Installation, testing & Commissioning Twenty Five

185 1 of Connector required to complete the job. 25250 Thousand Lot

Approved Make: Belden/ Neutrik Two Hundred

Three Crore Sixty Seven Lakh Seventy Three Thousand Four Hundred Thirty Nine Rupees And Seventy

I/We am / are willing to carry out the work

(Should be written in figures and words) of the estimated rate mentioned above. Amount of my / our tender works

**Estimated amount: 3,67,73,439.72/- **Estimated amount: 3,67,73,439.72/-

Put to Tender Rs. Put to Tender Rs.

Deduct……% below Rs. Add……% above Rs.

Net Rs. Total Rs.

In words …………………………….……… In words:

Three Crore Sixty Seven Lakh Seventy Three Thousand Four Hundred Thirty Nine Rupees And Seventy Two Paise Only

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other specifications of

Division or as directed.

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

Notes 3 - Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

Notes 4 - The contractor shall be exhibit board as for government circular no.

BDG/3277/1657 N dated-26/01/1997 S (M.GUJ) with detailed specification and details of work and amount

involved at site without any payment as directed by engineer in charge.

Notes 5 - I/We hereby declared that, I/We have visited the site and fully acquainted myself yourselves with the local

situation regarding materials and other factors pertaining to the work piece for submitting this tender.

Approved tender make list

Notes 6 - I/We hereby declare that, I/we have carefully studied condition of contract specification and other then

tender documents of this work and agree to execute that same accordingly.

Notes 7 - The price bid shall be including all taxes, duties, levies, fees and other charges as per applicable taxes

including service tax and label cess.

Notes 8 - The Credit of dismantled material shall be recovered from R.A. Bills

Notes 9 - Rate of each item of dismantled material must be as shown in credit item table. Minimum amount of credit

item must be as per amount of credit item table. In case quoted tender amount higher than estimated amount then

the credit item value shall be increased as per pro

Notes 10 -The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

Notes 11 -The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Notes 12 - GST and Income tax TDS will be deducted at a source while making payments of bills

Notes 13 - In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

SC Electrical sub division No 1 SC Electrical Division,

Gandhinagar Gandhinagar

Deputy Executive Engineer Executive Engineer

C P Sub Division No.-04 Capital Project Division No.2,

Gandhinagar Gandhinagar

Approved tender make list

BILLING OF QUANTITIES PART:

Credit of Dismantled Material

Estimated Rate Total

But May Item Description Rate in Unit

No Rate in Words To

Two Hundred Forty Seven

186 2 Brick Bat @ 70% of Qty 247.45 Rupees And Forty Five Paise Cu.M -494.9

Wooden window shutter with Six Hundred Seventeen Rupees

frame (370.95+240.8 = 611.75) And Eighty Seven Paise Only

Twenty Three Rupees And

Twenty Three Paise Only

Three Hundred One Rupees And

189 20 C I Pipe 100 mm Dia 301.17 Rmt -6023.4

Seventeen Paise Only

Forty Two Rupees And Eighteen

190 295 Floor Tiles @ 50% of qty 42.18 Sq.M -12443.1

One Thousand Eight Hundred

Eighteen Rupees Only

Three Thousand Two Hundred

192 96 Chair 3232 Each -310272

Thirty Two Rupees Only

Electrical Work

Cost of old and u/s various size

193 1 7000 Rupees Seven Thousand Only Lot -7000

of wires, cable,gland,lugs.

Cost of old and u/s Modular

type Switches , Plug,Regulator,

194 1 computer board ,various types 5000 Rupees Five Thousand Only Lot -5000

of call bell and Other

Miscellaneous Items

Cost of old and u/s various

195 1 1000 Rupees One Thousand Only Lot -1000

Rupees Five And Paise Fifty Five

196 24 Cost of old and u/s SP MCB 5.55 Ea -133.2

Cost of old and u/s Isolator FP Rupees Forty Three And Paise

63A Eighty Only

Approved tender make list

Cost of old and u/s 3 phase 4 Rupees One Hundred Thirty Eight

way DB board And Paise Ninety Six Only

Cost of old and u/s light Rupees Twenty Nine And Paise

fixtures Sixty One Only

Rupees Four Thousand Twenty

200 2 Cost of old and u/s projector 4021.2 Ea -8042.4

One And Paise Twenty Only

Cost of old and u/s projector Rupees Four Hundred Fifty Two

screen And Paise Seventy Six Only

Cost of old and u/s Rupees Six Hundred Sixty One

microphone And Paise Twenty Only

Rupees One Thousand Three

203 3 Cost of old and u/s amplifier 1322.16 Hundred Twenty Two And Paise Ea -3966.48

Rupees Three Hundred Five And

204 3 Cost of old and u/s speaker 305.28 Ea -915.84

Paise Twenty Eight Only

Cost of old cables, connector

205 1 10000 Rupees Ten Thousand Only Lot -10000

and others for AV system

Cost of old AHU and its Rupees Twenty Five Thousand

accessories i.e. Duct , Grill, etc. Only

Four Lakh Eighty Two Thousand Five Hundred Eighty Seven Rupees And Thirty Three Paise Only -482587.33

Three Crore Sixty Two Lakh Ninety Thousand Eight Hundred Fifty Two Rupees And Thirty Nine Paise Only

Deputy Executive Engineer Executive Engineer

SC Electrical sub division No 1 SC Electrical Division,

Gandhinagar Gandhinagar

Deputy Executive Engineer Executive Engineer

C P Sub Division No.-04 Capital Project Division No.2,

Gandhinagar Gandhinagar

Approved tender make list