Construction of fisher community centre-cum-Angler Hut i/c all furnishing at carp farm Badripur Distt Sirmour HP SH Paving of approach road to building and site development

Amount

Loosening & leveling the ground upto a level of 300mm below the sub grade level watered graded and compacted in layers to meet requirement of tables 300.1 & 303.5.2: complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Columns, pillars, posts and struts complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand picking, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushable, screening to fillup the interstices of coarse aggregates, watering and compacting to the required density grading 1 as per Technical Specifcations Clause 405.WBM Grade II 63 mm to 45 mm size (By manual means):complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying cement concrete 1:1:2 (1 cement : 1 Sand : 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work. Foundation and plinth complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars,ladders,railling,brackets and similar works complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :--With readymixed paint other than white complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Supplying and fixing precasted RCC three seater park benches as per specifications and standard design complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

MANOJ BHARDWAJ

DINESH KUMAR GUPTA