REPAIRS TO TOILET BLOCK OF ROOM NO. 1 TO 4, VIP ROOM DHANUSH, SEMINAR HALL AND DINING HALL OF OLD IB AND WPT OF ROOF SLAB OF OLD IB AT AFK.

Dismantling wall and ceiling boards (fibre/pulp/insulation/Aluminium/MS sheet/any type etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

Taking down existing chowakts or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame).

Taking down existing chowakts or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frame).

Dismantling structural steel work including doors/ gate/ windows but excluding framed truss etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key , scrubbing down with water etc. to receive plaster etc. complete.

Excavating over areas, n exc 1.5m deep and getting out hard/ dense soil

M&L for Hard core of gauge n.exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders.

M&L for murum filling in pavings, laid in layers n. exc 15cm thick. Spread, levelled and rommed including watering.

M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:6, complete

M&L for rendering 20mm thick on stone masonry/ other surfaces in CM 1:4 including finished the surface rough finish.

M&L for rendering 20mm thick on stone masonry/ other surfaces in CM 1:4 including finishing the surface even and smooth without using extra cement.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls/ roof slab in CM 1:4 including finishing the surface rough finish.

M&L for rendering 20mm thick on fair faces of brick or concrete surfaces of walls/ slab in CM 1:3 including finishing the surface rough finish.

Supply for liquid waterproofing compound for mixing in cement concrete/ mortar as specified

M&L for providing cement concrete type B 1:2:4mix (20mm graded aggregate ) in foundations, filling and mass concrete fair finished with necessary centering.

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4

M&L for Glazed ceramic coloured/ wooden texture tiles in vertical surface 450x350x7 mm thick, joint free, coloured tiles , set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for Non-skid coloured cermaic tiles 7mm to 8mm thick (joint free) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, Kajaria, Bell).

M/L for Vitrified Ceramic tiles light/ any shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.0 sqm, in floors etc in light shade, set jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, bell, Kajaria)

Filleting in any position and any shape in cement mortar 1:4 n ex 25 sqcm (for filling of skirting top)

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick/ any size, set, jointed and pointed in neat cement slurry in floors with mixture of white & grey cement in equal proportions and no pigment.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, door frames, window-cill, cooking platform/ wash basin platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Cutting holes into or through brick wall/ stone wall bulit in cement mortar and making good in cement mortar or cement concrete 1:2:4 Type B-1 as required for superficial area of hole n exceeding 150 sqcm.

S&F Door closer hydralically regulated, Aluminium ( extruded section) body, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed.

Supply and Fixing of aluminium louvered ventilator with louvered blade of 3mm thick figured glass 100mm wide, each blade riveted to jamb & at a distance of 65mm centre to centre/ as per site requirement including provision of stainless steel mosquito net and fixing of exhaust fan.

M&L for providing edge moulding/ groove cutting to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish granite stone or any description etc. complete.

S&F Powder coated aluminium sliding windows/ventilators/ doors three track (01 gauged and 02 glazed shutters ) including glazed panel shutter of standard section of jindal or equivalent with 4mm thick ordinary plain glasses fixed with rubber linning angles cleat and locking arrangement including pvc ball bearing, including aluminium grill stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apreature 1.40 mm etc, making good to the disturbed surface and match with existing surfaces complete all as specified and directed.

Supply and fix 30mm thick single piece, coloured ABC (ACRYLONITRILE BRUTADINE STYRENE) coated, PUF filled door shutters with PUF (Poly Urethane Foam) insulation of minimum density 40 Kg/Cum filled in between two ABS sheets of thickness 1.2mm (min), border covered with insitu pasted ABS strips of width equal to thickness of door shutters, 1.2mm thickness, reinforced with two number 10mm CTD bars, pre embedded with wooden blocks of suitable sizes for receiving hinges, tower / sliding bolts, towel rails, handles etc, with/without embossed pattern.

S&F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, and both face covered with decorative face lamination with lipping/ frame to match.

S&F for extruded aluminium alloy butt hinges Type B-21 with galvanised mild steel hinge pin, anodised and fixed. Size of hinges 100mm.

S&F for extruded aluminium alloy handles, fabricated type, anodised. Size of handle 150mm.

S&F aluminium anodised barrel tower bolts of extruded section and fixed, length of bolt 200mm.

M/L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed bolt=250mm.

S&F Butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed, type B-11, size of hinge 125mm.

S&F brass handles, cast type, polished bright, size of handle 150mm

S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, length of bolt 200 mm.

S&F Brass sliding door bolts, with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rolled or drawn brass bolts, length of bolt= 250mm.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 15mm

Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 20mm

Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 25 or 32mm

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. outer diameter of pipe 20mm

S&F floor mounted ceramic one piece western toilet/ water closet/ commode with soft close toilet seat cover and gaskets inbuilt siphon flush with two options s trap outlet (white) including toilet paper holder. Make: Cera/ Hindware/ Jaquar/ Kohler

S & F Health Faucet (ABS body)mild steel Chromium Plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection & fixed in position complete all respect as specified

Supplying and fixing viterous china wash hand basin flat back size 630mm x450mm/ counter type as per directives of Engg-in-Charge exculding taps, waste chain and plug and porocelain stopper but including brackets. Make: Hindustan/ Parryware/ Cera

Supplying & Fixing waste fitting brass chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts flange and bedded inred lead cement and other and fixed loose of pipe 32mm.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F ceramic automatic urinal complete set (white) with sensor electric/ battery operated. Make: Cera/ Hindware/ Jaquar/ Kohler

S&F urinal partition with frosted glass 8mm thick size H-900mm W-450mm. Make: Cera/ Hindware/ Jaquar/ Kohler

S&F Pillar tap brass chromium plated fancy type suitable for bowl type wash hand basin erect type fixed to granite top and screwed to pipe of bore 15 mm. Make: Jaquar, Cera, Kohler

S&F fancy type chromium plated brass heavy duty two way bib cock fixed to concealed pipe of bore 15 mm. Make: Jaquar, Cera, Kohler

S&F fancy type chromium plated brass heavy duty angle stop cock fixed to concealed pipe of bore 15 mm. Make: Jaquar, Cera, Kohler

S&F fancy type chromium plated brass heavy duty hot & cold mixer with concealed shower, wall mounted and screwed down to concealed pipe of bore 15 mm. Make: Jaquar, Cera, Kohler

S&F Aluminum/ GI section grid flat in ceiling including 10mm thick plaster of paris ceiling (Gypsum anhydrous) inluding moulding of required design, alignment and shape as directed.

S&F of Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern/wash basin/urinal.

S&F PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement diameter of outlet = 75mm.

S&F Towel Rail 600mm long ofPTMT fixed with and including chromium plated brass screw and wooden/ plastic cleats (minimum weight 190gms).

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls

M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 20mm.

M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 25mm.

S&F CPVC Brass elbow outer diameter 20mm

S&F CPVC Male brass threaded adaptor (MTA/MBTA) outer diameter 20mm

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 75mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 110mm.

S&F PVC (SWR) bends any radius bore of pipe 75mm.

S&F PVC (SWR) junction (single T )equal or unequal bore of pipe 75mm.

S&F PVC (SWR) bends any radius bore of pipe 110mm.

S&F PVC (SWR) junction (single T )equal or unequal bore of pipe 110mm.

Stripping out/ taking down existing water proofing treatment with plaster from roof slab and parapet walls and stone slab etc. including hacking for key, raking out joints and scrubbing down with water etc to receive plaster as per direction of Engg-in-Charge.

M&L for brushing neat cement slurry with 3.0 kg of cement per sq. meter.

M&L for providing WPT by using membrane over roof & vertical surface, consisting of applying oil bonded bituminous primer coat at 0.30 kg/m2 on a clean & dry surface & then providing a layer of APP modified membrane 3mm thick weighing approx. 4 kg /m2with non woven polyester reinforcement with very thin polyethylene film on both side with thermofusion process by gas regulated torch & finally applying one coat of super silver sheld aluminium based bituminous paint all as per specification & as directed by E-in-C. Make: Tiki, IWL or equivalent.

S&F Mild steel work for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S&F Rotational moulded polyethylene water storage tank capacity 2000 litres tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

M&L for preparing old/ new plastered surfaces including primer and applying plastic emulsion two coats over 3mm thick wall care putty with finishing.

M&L for preparing plastered or unplastered old surfaces and finishing walls with Acrylic smooth exterior paint of approved make/manufacturing brand & shade new/ old work (two or more coat applied @ 1.67 ltr/10sqm over) including priming coat of exterior primer applied @ 2.20 kg/10sqm

Removing surplus excavated soil/rock and demolished material to a distance exc 500m but n exc 1.5 KM and depositing where directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to EM store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc.

Point wiring in PVC casing & Caping for one light point / one fan point /Bell point controlled by one switch with PVC insulated stranded copper conductor (FR class 2) wire 1.5 sq. mm size including material and labour. (Make of wire - Polycab, Finolex, KEI, RR Kable & PVC Casing & Caping - Modi, Pressfit only.)

Point wiring in PVC casing & Caping for one 3 pin socket outlet, 5 Amps, independent with stranded copper conductor wire (FR Class 2) of 2.5 sq. mm size including material and labour. (Make of wire - Polycab, Finolex, KEI, RR Kable & PVC casing & Caping- Modi, Pressfit only.)

Point wiring with stranded copper conductor in PVC Casing & Caping for one 3 pin socket out let 5Amp. on the same board with other switches with FR Class 2, wire 2.5 sq. mm size including material and labour. (Make of wire - Polycab, Finolex, KEI, RR Kable & PVC casing & Caping- Modi, Pressfit only.)

Supply and fixing of modular switch, 1 way, 6A, 1 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular socket, 6A - 2/3 pin combined, 2 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular switch, 1 way, 16 Amps, 1 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular socket, 6A/16A - 2/3 pin combined 2 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular metal / Plastic /PVC Heavy duty flush box, 6 module.

Supply and fixing of modular white cover plate with frame , 6 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular metal / Plastic/PVC Heavy duty flush box, 3 module.

Supply and fixing of modular white cover plate with frame , 3 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of modular metal / Plastic/PVC Heavy duty flush box, 2 module.

Supply and fixing of modular white cover plate with frame , 2 module. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of Celling rose with plate/board, 3 point,, PVC/Polycarbonate, Isolated body. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of Lamp holder, angular/batten , PVC/Polycarbonate type with plate / board suitable for batten fittings , PVC/Polycarbonate, Isolated body. Make- Legrand/Anchor- Roma/L&T only.

Supply and fixing of 15 watt LED panel light recess type 230 V. Round or square shape 6 to 8 inchs in size. Connecting up to the ceiling rose or connector Make Crompton, Orient, Philips etc.

Supply and fixing of decorative LED strip with driver inside the PoP.

Supply and fixing 600mm x 600 mm LED panel light fitting 35/36 watt, 230 V, AC decorative recess type with driver, holder including LED connecting up with three core flexible copper conductor cable of suitable size from ceilling rose complete. Of Make Crompton, Orient, Philips etc.

Supply and fixing LED light fitting 1x20 watt, 230 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilling rose complete. Of Make Crompton, Orient, Philips etc.

Supply and fixing celling fan 1200 mm BLDC, with down rod and Electrinics Regulator and connecting up including provision of cable from ceiling rose or connector .Make Automburg, Usha, Crompton, Polycab, Havells only.

Wiring for circuit/sub main wiring along with earth wire with 2X6 Sq. mm + 1X6 sq. mm earth wire sizes of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required in PVC Casing & Caping including material and labour. Make of wire- Polycab/Finolex/KEI/RR Kable only. make of Casing caping - Modi, Pressfit only

Wiring for circuit/sub main wiring along with earth wire with 2X4 Sq. mm + 1X4 sq. mm earth wire sizes of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required in PVC Casing & Caping including material and labour. Make of wire- Polycab/Finolex/KEI/RR Kable only. make of Casing caping - Modi, Pressfit only

Supply and fixing of single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole 20/25 Amp MCB, Suitable for AC connection, Make - Legrand/Indo asian/schneider/ABB/L&T only.

Supply and fixing of sheet metal encloser, single door MCB DB (Distribution board), single phase 240 Volt, 2-way, for MCB/RCBOs, with neutral link, Make - Legrand/Indo asian/schneider/ABB/L&T only.

Supply and fixing of sheet metal encloser, single door MCB DB, single phase phase, 12-way, for one RCBO & 8 MCB SP, with neutral link, Make - Legrand/Indoasian/Schneider/ABB/L&T only.

Supply and fixing of RCBOs Earth leakage, Overload & Short- Circuit Protection 30 mA, Double pole, 40 Amp. 240V, complete with connection testing and commissionning. Make - Legrand/Indo asian/schneider/ABB/L&T only.

Supply and fixing of MCB, C-Type, 10kA, Double Pole (MCB DP)/SPN , 240V, 6A,-32A complete with connection testing and commissionning. Make - Legrand/Indo asian/schneider/ABB/L&T only.

Supply and fixing of MCB, C-Type, 10kA, Single Pole (MCB SP), 240V, 6A,-32A complete with connection testing and commissionning. Make - Legrand/Indo asian/schneider/ABB/L&T only.

Supply and fixing exhaust fan of sturdy plastic body of sweep 300mm and connecting up including provision of cable from ceiling rose / connector to fan. Make Automburg, Usha, Crompton, Polycab, Havells only.

Credit Item-Dismantled Door frames and shutter any type exc 1.5 Sqm but not exc 4 Sqm

Credit Item-Dismantled boarding any description fixed in position with screws.

Credit Item-Dismantled mild steel member, wrought iron (of any description) obtained from dismantling.

Please Enable Macros to View BoQ information