Construction of Smart Library-MC Terminal Building Upgrade.

Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). MDF board conforming to IS: 14587 edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand.

Providing and fixing in position cabins made of 19mm ply with partitions of size 2'-0" x4-0" with depth of 2'-0" the fron doors shall be of 19mm ply with teak wood veineering on all exposed sides with all accessories complete I;e locks, tower bolts, all complete finished face to be measured incl. all hardware fittings and fixtures complete.

Providing and fixing wooden storage rack (1'6" deept) made of 18mm thick BWR grade plywood, incl. all necessary wooden battens/supports, screws, adhesives, cutting, complete as per drawing and site requirement.

P/F of 1.5mm thick decorative laminated sheet incl. all fixtures/fittings all complete job.

Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

French spirit polishing, Two or more coats on new works including a coat of wood filler all complete.

Providing and fixing of 12mm thick laminated wooden flooring of approved brand and make over 4mm thick foam under layers incl. all fittings/fixtures, carriage all complete as per directions of EIC.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work all complete.

Providing, installing, testing and commisioning wall mounted split type air conditioner of 2.00 TR capacity, 5-star BEE rated, complete with indoor and outdoor units, invertor/rotary compressor, copper refrigerant piping with insulation, drain piping elctrical wiring, MCB, remote control, stand/clamps for outdoor unit, vacuming gas charging and all accessories, complete as per specifications and directions of the EIC Note:- The AC must be of superior/reputed quality and make, performing between temperature range of 10 degree celcius to 52 degree celcius (Hot & Cold type 3-Star BEE rating) with automatic wall mounted stablizer of reputed make and suitable capacity with these additional specifications, the rates given against said item are as per LMR .