Chain Link Fencing with Angle Iron Posts.

Amount

E/W in excavtion in foundation trenches or drains (not exceeding 1.5 mts in width as well as 10 sqmts on plan) including dressing of sides & ramming of botoms, lift up to 1.5mts & lead of 50 mts including getting out the execavated soil and disposal of surplus execavated soil as directed.

Providing & laying dry stone solling including ramming, dressing etc complete in foundations, including Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.

Providing & laying in position cement concrete (1cement:4coarse sand: 8 graded stone agg 40mm nominal size) mix of specificied grade excl cost of centering and shuttering. All work upto plinth level. including Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job. CRUSHED.

Centering and shuttering including strutting, propping etc and removal of form work for, foundations, footings, bases of columns etc. including Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.

Centering and shuttering including strutting, propping etc and removal of form work for, Walls, pilasters, plinths, string courses etc. including Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.

Providing & fixing of Angle Iron Posts made of MS Angles (50x50x6 mm) & Flat Iron (50x6 mm) including cutting, hoisting, fixing in position and applying a priming coat of approved red oxide steel primier with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.

Providing & fixing of Black annealed Wire Crate made out of 4.00 mm B.A. Wire (Wire as per IS: 280) machine woven both ends bent of 50x50 mm mesh size including strengthing with nuts, bolts and washers as per required qunatity & size and as per directions of Engineer-in-charge. with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job. (Chain Link fencing).

Providing & laying cement concrete 1:3:6 mix using 1 cement : 3 coarse sand : 6 graded stone aggregate 40 nominal size of specificied grade excl cost of centering and shuttering. All works up to plinth Level, with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job. Crushed.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size)including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete.

Reinforcement for R.C.C work including straighening, cutting, bending, placing in position and bending including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete job. ( TMT bars).

Providing 40x5 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix. (1 cement: 3 coarse sand : 6 graded stone 20 mm nominal size) including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete. For Gate Pillars.

Providing & fixing steel gate with frame of (40x40x6mm) angle iron with (3mm) gussets, plates, at the junction and corners incld all necessary fittings with a coat of steel primer including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete job.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm. including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete job.

Applying Primier with ready mixed red oxide Zinc Chromate primier of approved brand and manafacture on steel galvanised iron/steel works, including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete job.

Painting with ready mixed synthetic enamel paint of approved brand and manafacture in all shades to given an even shade. (two or more coats on new steel work) including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete.

M/S SAMEER AHMAD PEER

M/S GH NABI RESHI