Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.4 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
Tender Value
₹8.4 L
EMD Value
₹21,026
Closing Date
20 Jun 2023, 4:00 pmClosed
ASST EXECUTIVE ENGINEER
OFFICE OF THE EXECUTIVE ENGINEER LSGD DIVISION DIST PANCHAYAT PALAKKAD 678001
Annual Plan-Dt.Pt.PKD - 2022 - 23 - Kannambra Short Stay Home Ladies-Providing additional facilities to the electrical installation in the Kannambra Short Stay Home Ladies -General Electrical Work
2023_LSGD_581408_2
02/D1/ET/AEE/2023-2024
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Kannambra G.P
Please refer tender documents
7 documents required · 7 mandatory
₹1,855
Yes
₹21,026
Yes
16 Sept 2023
13 Jun 2023
23 Jun 2023
13 Jun 2023
20 Jun 2023
13 Jun 2023
Amount
1. Electrification.
90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point
OD41313/2023-2024:Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 200 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C.
90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.
OD41576/2023-2024:Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 66,pressure die-cast housing with individual LEDs with modular secondary optics 150watts with driver and including all necessary all accessories etc in the existing GI pipe/single arm/Double arm and giving necessary connections etc. as required - Havells make SL-150W ( ENDURA PEARL PLUS 150 W ) (SAP Code - ENDURAPEARLPLUSSL150WLED757PASYTOPC) or equivalent make of Osram/Phillips/Crompton make. (Five year Warrantee for complete set.)
90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps
OD41541/2023-2024:Supply, conveyance, installation, testing and commissioning of CORVUS concealed COB/SPOT LED lights 1w WW/NW directly in the existing opening and giving necessary connection etc. complete including all charges. LUKER model No. LSCOBR01/equivalent make of Philips/Bajaj.
OD41543/2023-2024:Supply, conveyance, installation, testing and commissioning of LED POST TOP Light 15W ( RUBY MINI) Aesthetically designed LED post Top with aluminium enclosure and die casted heat sink exhibits classic look with symmetrical light distribution and excellent heat dissipation for long life, IP 65 on 50mm GI pipe and giving connection etc. as required. Havells Model No.RUBYMINIPT15WLED757PSYMTOPC or equivalent make of Philips/Bajaj.
OD41542/2023-2024:Supply Conveyance, installation, testing and commissioning of JETA QUANTO PLUS MONO 50W colour LED flood light, Energy saving, environmental friendly, long life, one design for aesthetic consistency in multi purpose application with SMD LEDs as light source with driver included, suitable for highlighting architectural features or Area lighting. Also suitable to rough services/installations. IP 65 and fixed on wall using anchor bolt & nut and giving necessary connection etc. complete including all charges. Havells model No.JETAQUANTOPLUSFLS50WLEDREDP30DPC/JETAQUANTOPLUSFLS50WLEDGREENP30DPC or equivalent make of Philips/Bajaj.
90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm
9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)
90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)
OD42989/2023-2024:Supply and providing12x3mm brass nut and bolt etc.as required.
90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size
OD41559/2023-2024:Supply and fixing Sintex Hot pressed mouled SMC Junction box (GS-JB-2817 (240x130x95) with 32 A HRC Fuse Base with HRC Fuse link ,32 A neutral link & loop in loop out connector for street light poles etc. fixed on Octagonal Pole using suitable clamps with supporting strip, bolt, nut & plate washer etc. complete including all charges.
OD41554/2023-2024:Supply and installation of 32 inch smart LED TV (Panasonic) with wall mounting brackets duly fixed on wall/wooden paneling etc. complete and giving connection including all charges.
OD41553/2023-2024:Supply and installation of voltage stabilizer for Smart TV unit with voltage range of 175 - 275V and out put range of 210 - 240V. and giving necessary connection including all charges. (V Guard Neo Crystal or equivalent reputed make having similar properties)
OD41552/2023-2024:Supply and installation of 10 Ltr capacity storage water Heater (V Guard PEBBLE) fixed on wall using anchor bolts & nuts with inlet and out let connection tubes and giving necessary electrical/water connection etc. complete including all charges.
90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top
OD41551/2023-2024:Supply, conveyance, erection, testing and commissioning of Crompton Make Bore well submersible Pump 1HP, 1Ph, 210V, 50HZ, 2880 RPM Model 4W10BW1DM. (Water Cooled) Head Range 10M to 78M discharge range 100 LPM to 10 LPM Outlet size 32MM. M.O.C. Diffuser (Noryl) Impeller (Noryl/Delran) Pump Shaft (SS) Motor Body (SS) Pump Jacket (SS) NRV Body (C.I) rest of items as CG Standard. Discharge at 46M-3900 LPH etc. complete including all charges.
OD41550/2023-2024:Supply and fixing 1.25 inch (32mm) Ashirwad UPVC Pipe ( 15Kg/Cm2) V4 with special using necessary additional materials for fixing the pipe to the Motor etc. complete including all charges.
OD41549/2023-2024:Supply and installation of 1.25 inch (32mm) UPVC Adaptor set suitable for 1HP borewell type motor pump set etc. complete including all charges.
OD41548/2023-2024:Supply and fixing Bore Clamps (2Nos), Bore Cap (1No), Cable Joint tape etc. complete including all charges.
OD41624/2023-2024:Supply and Fixing of CG Make Submersible Control Panel suitable for single phase 1HP submersible motor pump set.
90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
OD41547/2023-2024:Supply and providing12MM Nylon Rope with ISI for holding the borewell motor pump set in the bore well etc. complete as required.
OD41560/2023-2024:Lowering the submersible motor with pipe with out damage, using necessary chain pully etc. including all charges.
OD41544/2023-2024:Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement, trenching, refilling, testing of joints complete as per direction of Engineer in Charge.32mm dia 10.Kgf/cm2.
OD41545/2023-2024:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes, fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- External work - Exposed on wall.
OD41558/2023-2024:SITC of wall mounting Split Air Conditioner unit of 1.0 TR ratings performing to relevant IS suitable for operating on 230V,50Hz single phase AC supply, filled with refrigerant gas, high energy efficient RoHS compliant capable of performing functions like cooling,dehumidifying, air circulating, filtering etc. of following capacity including refrigerant copper piping 3m with insulation, control cable up to 3m, 3m drain pipe, condenser stand, microprocessor control with cordless remote control etc. with one year warranty for machine and one year 3Nos. free service. 1.0TR 1 phase 3 Star Inverter AC unit.(GENERAL - ASGG12CPAA/equivalent reputed make having similar properties)
OD41561/2023-2024:Supply of providing 4 KVA voltage stabilizer for split type A/C unit with voltage range of 175-275V and out put range of 210 - 240V. (V Guard or equivalent reputed make having similar properties)
OD41546/2023-2024:Supply and fixing 1.25 inch (32mm) 10Kgf/cm2 PVC Pipe including fixing the pipe with clamps at 0.50 m spacing. This includes jointing of pipes, fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge for drain pipe to AC outdoor unit.
OD41556/2023-2024:Supply and installation of telephone instrument (Panasonic model 400 SS) etc complete and giving connection including all charges.
OD41555/2023-2024:Supply and installation of Lightning Protector for the EPABX system etc complete and giving connection including all charges.
90.6.9.4:Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit4 pair
1.19:Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm
1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm
1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm
1.17.29:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm
90.10.1.2:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface
1.28.1:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
90.10.3.14:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SP switch with indicator
1.24.6:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
1.24.7:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet
1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
OD42846/2023-2024:Supply,installation, testing and commissioning of TATA SKY Dish TV antenna, Set top box (7 Nos.) for cable TV connections, splitter unit, coaxial cable for taking connection from Dish antenna to Set Top box, socket for connecting the TVs etc. including installation charges, monthly subscription charges for getting TV program's etc. complete including all charges.
ARUN.C.S
Bidder Name
AYAPPA ELECTRICALS
ARUN.C.S
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_858644.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .