Delhi

Cancelled

Works

Electrical Works

(1) RMO of storm water Pump sets and DG sets at Bandh Road and SSN Marg under M-South Electrical Maintenance Division during the financial year 2026-27.(2) Maintenance of various roads under Division South Road-1 during 2026-27

Public Works Department

New Delhi | South East Delhi, Delhi

Amount: ₹91.8 LCloses: 26 May 2026Closed

Timeline

Published20 May 2026
Cancelled22 May 2026

Corrigenda

Corrigendum

1 updatesLatest on 20 Aug 2026

Cancellation Details

Cancellation of Tender

Tender CancellationAs per sheet attachedReason: Error in Creation of TenderDocument: cancelled_1.pdf

Published 22 May 2026

Tender Value

₹91.8 L

EMD Value

₹1.8 L

Closing Date

26 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

O/o The Executive Engineer (E) South Elect. Div., PWD, Sukhdev Vihar, Mathura Road, Near Okhla Flyover, New Delhi

Work Description

(1) RMO of storm water Pump sets and DG sets at Bandh Road and SSN Marg under M-South Electrical Maintenance Division during the financial year 2026-27.(2) Maintenance of various roads under Division South Road-1 during 2026-27. (Electrical Civil wo

Tender Information

Tender ID

2026_PWD_291690_1

Reference Number

21/EE(E)/EMD South Elect. Divn./PWD/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

30 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

Requiredb) Receipt of deposition of original EMD issued from division office of any Executive Engineer, PWD/ (.pdf)

Requiredc) Valid Electrical License. However, the contractors will be allowed to participate in tender with (.pdf)

Requiredd) Certificate of Registration for GST and acknowledgement of upto date filed return. (.pdf)

Requirede) Scanned copy of valid PAN Card as issued by the Income Tax Department. (Required from both CPWD R (.pdf)

Requiredf) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-E (Required from both CPWD and Non) (.pdf)

RequiredCPWD Registration Or appropriate list of MES, BSNL and other OR Work experience certificate of Simil (.pdf)

Requiredi. Scanned Copy of Letter of Transmittal. (For Non Registered Contractors only) (.pdf)

Requiredii. Annual financial turnover statement of minimum 30 of estimated cost during the last three conse (.pdf)

Requirediii. Loss and Profit statement during the last five years ending 31st March 2025 (.pdf)

Requirediv. Solvency of minimum 40 of estimated cost OR Net Worth certificate of minimum 10 of estimated cos (.pdf)

Requiredv. Affidavit on Non Judicial Stamp Paper of Rs. 100/- as per Form-F. (For Non CPWD Contractors ) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1.8 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

22 May 2026

Published

20 May 2026

Bid Opening

26 May 2026

Download Starts

20 May 2026

Download Ends

26 May 2026

Submission Starts

20 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (24 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, testing and commissioning of Diesel engine driven Horizontal centrifugal Mix flow auto priming pump coupled with 38 HP engine mounted on Small wheel trolley suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)
1.01	Pump Specifications:- a)Vacuum Capacity:-70CFM or above b) Suction x Discharge:-150mm x 150mm c)Max. Suction lift:- 9 Mtr. or above d)Max. Solid handling:-Upto 35 mm e) Performance:-1500-1800 RPM, Flow:-450m³/hr or above f)Head:-30 Mtr. or above	-	-	-	-
1.02	Engine Specifications:- a)3-cylinder, air-cooled, naturally aspirated diesel engine, suitable for continuous duty operation. b) Capacity:-38 HP @1500-1800 RPM c) Starting system and Accessories: Electric with starter Motor, Charging Alternator,Oil bath Air cleaner, fuel Injection Pump,oil filter, engine mounted Exhaust Silencer,Manual shut Off, wire harness & starting Panel. d)12/24Volt batteries of suitable size Capacity. e) Quality Certification: The engine shall preferably be manufactured by an engine manufacturer having ISO 9001 certification for quality management systems. f) Noise Level: The noise level of the engine shall not exceed 75 dB measured at a maximum distance of 7 meters under normal operating conditions. g) Emission Compliance: The engine exhaust emission levels shall comply with the latest revised emission norms of the Government of India (GOI). h) Belt Tensioning Arrangement: The engine shall be provided with an automatic belt tensioning arrangement for the battery charging system. i) Oil Level Indication: The engine shall have a facility for indicating the oil level in the oil sump during operation. k) Spares and Service Support:Adequate spares and service facilities for the engine shall be available in the nearby area to ensure prompt maintenance and operational support.	-	-	-	-
1.03	Material of Construction:- a)- Impeller:-Stardard SS-304 (Open type) b)Pump Shaft:-Stardard SS-431 c)Volute casing:-Stardard FG-260 d)Priming Tank:-Mild steel with powder coating inside and outside. The priming tank shall be providedwithaheavy-dutyautomaticfloatvalvesuitableforcontinuousoperationtomaintainthe required water level for reliable pump priming. The float valve shall automatically control inlet water, provide positive shut-off to prevent overflow, and ensure automatic refilling. All components shall be made of corrosion-resistant materialssuitableforrawwaterandoutdoorservice,properlysizedforthetankcapacity,leak-proof,easy to adjust and maintain, and compliant with applicable standards. e) Discharge Head:-Mild steel f)Stuffing Box:-High-grade cast iron with double mechanical seal immersed in oil bath.	-	-	-	-
1.4	g)Mounting:-Small wheel trolley. The pump shall be provided with a heavy-duty suction strainer, designed to permit the passage of solid particles upto 35 mm dia meter without choking or restricting suction flow during operation. The suction strainer shall be adequately sized to ensure free flow of water, prevent ingress of oversized debris, and maintain minimum head loss with stable suction condition sunder continuous duty.To corrosion, abrasion, and mechanical impact, and shall be suitable for handling raw water, sewage, sludge, debris-laden water, and site operating conditions.The strainer shall be provided with an industrial-grade powder-coated external finish to ehance protection against corrosion, environmental exposure, and handling wear, ensuring long service life. h) Coupling: Fenaflex tyre coupling Configuration: Without Canopy Frame:- heavy base frame with small wheel tyres	2	Sets	19,22,224	₹38,44,448
3	Supplying & fixing of 150mm braided flexible hose pipe(SS 304) with suitable MS flanges for suction of 9 Mtr.etc. complete as reqd.	2	Jobs	2,29,444	₹4,58,888
4	Supplying & fixing of 150mm MS strainer for suction end etc. complete as reqd.	2	Set	41,182	₹82,364
5	Supplying & fixing of 150mm Lay Flat Hose pipe for delivery of 50 Mtr etc. complete as reqd.	2	Set	76,481	₹1,52,962
6	Supplying & fixing of 6” M Type coupling set with hose clamp ( for adaption to the pump coupling at outlet) etc complete as reqd.	2	Set	17,650	₹35,300
7Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.20 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 4.21 MB

Work Item Documents

NIT.pdf

Tender Documents • 4.19 MB

BOQ_387128.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, testing and commissioning of Diesel engine driven Horizontal centrifugal Mix flow auto priming pump coupled with 38 HP engine mounted on Small wheel trolley suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)
1.01	Pump Specifications:- a)Vacuum Capacity:-70CFM or above b) Suction x Discharge:-150mm x 150mm c)Max. Suction lift:- 9 Mtr. or above d)Max. Solid handling:-Upto 35 mm e) Performance:-1500-1800 RPM, Flow:-450m³/hr or above f)Head:-30 Mtr. or above	-	-	-	-
1.02	Engine Specifications:- a)3-cylinder, air-cooled, naturally aspirated diesel engine, suitable for continuous duty operation. b) Capacity:-38 HP @1500-1800 RPM c) Starting system and Accessories: Electric with starter Motor, Charging Alternator,Oil bath Air cleaner, fuel Injection Pump,oil filter, engine mounted Exhaust Silencer,Manual shut Off, wire harness & starting Panel. d)12/24Volt batteries of suitable size Capacity. e) Quality Certification: The engine shall preferably be manufactured by an engine manufacturer having ISO 9001 certification for quality management systems. f) Noise Level: The noise level of the engine shall not exceed 75 dB measured at a maximum distance of 7 meters under normal operating conditions. g) Emission Compliance: The engine exhaust emission levels shall comply with the latest revised emission norms of the Government of India (GOI). h) Belt Tensioning Arrangement: The engine shall be provided with an automatic belt tensioning arrangement for the battery charging system. i) Oil Level Indication: The engine shall have a facility for indicating the oil level in the oil sump during operation. k) Spares and Service Support:Adequate spares and service facilities for the engine shall be available in the nearby area to ensure prompt maintenance and operational support.	-	-	-	-
1.03	Material of Construction:- a)- Impeller:-Stardard SS-304 (Open type) b)Pump Shaft:-Stardard SS-431 c)Volute casing:-Stardard FG-260 d)Priming Tank:-Mild steel with powder coating inside and outside. The priming tank shall be providedwithaheavy-dutyautomaticfloatvalvesuitableforcontinuousoperationtomaintainthe required water level for reliable pump priming. The float valve shall automatically control inlet water, provide positive shut-off to prevent overflow, and ensure automatic refilling. All components shall be made of corrosion-resistant materialssuitableforrawwaterandoutdoorservice,properlysizedforthetankcapacity,leak-proof,easy to adjust and maintain, and compliant with applicable standards. e) Discharge Head:-Mild steel f)Stuffing Box:-High-grade cast iron with double mechanical seal immersed in oil bath.	-	-	-	-
1.4	g)Mounting:-Small wheel trolley. The pump shall be provided with a heavy-duty suction strainer, designed to permit the passage of solid particles upto 35 mm dia meter without choking or restricting suction flow during operation. The suction strainer shall be adequately sized to ensure free flow of water, prevent ingress of oversized debris, and maintain minimum head loss with stable suction condition sunder continuous duty.To corrosion, abrasion, and mechanical impact, and shall be suitable for handling raw water, sewage, sludge, debris-laden water, and site operating conditions.The strainer shall be provided with an industrial-grade powder-coated external finish to ehance protection against corrosion, environmental exposure, and handling wear, ensuring long service life. h) Coupling: Fenaflex tyre coupling Configuration: Without Canopy Frame:- heavy base frame with small wheel tyres	2	Sets	19,22,224	₹38,44,448
3	Supplying & fixing of 150mm braided flexible hose pipe(SS 304) with suitable MS flanges for suction of 9 Mtr.etc. complete as reqd.	2	Jobs	2,29,444	₹4,58,888
4	Supplying & fixing of 150mm MS strainer for suction end etc. complete as reqd.	2	Set	41,182	₹82,364
5	Supplying & fixing of 150mm Lay Flat Hose pipe for delivery of 50 Mtr etc. complete as reqd.	2	Set	76,481	₹1,52,962
6	Supplying & fixing of 6” M Type coupling set with hose clamp ( for adaption to the pump coupling at outlet) etc complete as reqd.	2	Set	17,650	₹35,300
7Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, installation, testing and commissioning of Diesel engine driven Horizontal centrifugal Mix flow auto priming pump coupled with 38 HP engine mounted on Small wheel trolley suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)

1.01

Pump Specifications:- a)Vacuum Capacity:-70CFM or above b) Suction x Discharge:-150mm x 150mm c)Max. Suction lift:- 9 Mtr. or above d)Max. Solid handling:-Upto 35 mm e) Performance:-1500-1800 RPM, Flow:-450m³/hr or above f)Head:-30 Mtr. or above

1.02

Engine Specifications:- a)3-cylinder, air-cooled, naturally aspirated diesel engine, suitable for continuous duty operation. b) Capacity:-38 HP @1500-1800 RPM c) Starting system and Accessories: Electric with starter Motor, Charging Alternator,Oil bath Air cleaner, fuel Injection Pump,oil filter, engine mounted Exhaust Silencer,Manual shut Off, wire harness & starting Panel. d)12/24Volt batteries of suitable size Capacity. e) Quality Certification: The engine shall preferably be manufactured by an engine manufacturer having ISO 9001 certification for quality management systems. f) Noise Level: The noise level of the engine shall not exceed 75 dB measured at a maximum distance of 7 meters under normal operating conditions. g) Emission Compliance: The engine exhaust emission levels shall comply with the latest revised emission norms of the Government of India (GOI). h) Belt Tensioning Arrangement: The engine shall be provided with an automatic belt tensioning arrangement for the battery charging system. i) Oil Level Indication: The engine shall have a facility for indicating the oil level in the oil sump during operation. k) Spares and Service Support:Adequate spares and service facilities for the engine shall be available in the nearby area to ensure prompt maintenance and operational support.

1.03

Material of Construction:- a)- Impeller:-Stardard SS-304 (Open type) b)Pump Shaft:-Stardard SS-431 c)Volute casing:-Stardard FG-260 d)Priming Tank:-Mild steel with powder coating inside and outside. The priming tank shall be providedwithaheavy-dutyautomaticfloatvalvesuitableforcontinuousoperationtomaintainthe required water level for reliable pump priming. The float valve shall automatically control inlet water, provide positive shut-off to prevent overflow, and ensure automatic refilling. All components shall be made of corrosion-resistant materialssuitableforrawwaterandoutdoorservice,properlysizedforthetankcapacity,leak-proof,easy to adjust and maintain, and compliant with applicable standards. e) Discharge Head:-Mild steel f)Stuffing Box:-High-grade cast iron with double mechanical seal immersed in oil bath.

1.4

g)Mounting:-Small wheel trolley. The pump shall be provided with a heavy-duty suction strainer, designed to permit the passage of solid particles upto 35 mm dia meter without choking or restricting suction flow during operation. The suction strainer shall be adequately sized to ensure free flow of water, prevent ingress of oversized debris, and maintain minimum head loss with stable suction condition sunder continuous duty.To corrosion, abrasion, and mechanical impact, and shall be suitable for handling raw water, sewage, sludge, debris-laden water, and site operating conditions.The strainer shall be provided with an industrial-grade powder-coated external finish to ehance protection against corrosion, environmental exposure, and handling wear, ensuring long service life. h) Coupling: Fenaflex tyre coupling Configuration: Without Canopy Frame:- heavy base frame with small wheel tyres

Sets

19,22,224

₹38,44,448

Supplying & fixing of 150mm braided flexible hose pipe(SS 304) with suitable MS flanges for suction of 9 Mtr.etc. complete as reqd.

Jobs

2,29,444

₹4,58,888

Supplying & fixing of 150mm MS strainer for suction end etc. complete as reqd.

Set

41,182

₹82,364

Supplying & fixing of 150mm Lay Flat Hose pipe for delivery of 50 Mtr etc. complete as reqd.

Set

76,481

₹1,52,962

Supplying & fixing of 6” M Type coupling set with hose clamp ( for adaption to the pump coupling at outlet) etc complete as reqd.

Set

17,650

₹35,300

7Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.