BARC(V)/C AND M/Water Supply/02

Amount

Supply, Installation and testing of 2 HP capacity open well submesrible pump to be installed in the existing open well (approximate well depth is 15.0 meter) as directed by department EIC. Flow shall be 150LPM @ 40 meter head. This work includes supply & installation of suitable GI chain for holding the pump inside the openwell for lifting/ hanging/ installation. MOC: Body/base - CI impeller, bowl & shaft - SS Make:Falcon/Kirloskar/Grundfoss/Wilo/any equavelent make confirming to specification.

Supply & installation of starter cum control panel suitable for 2HP pump motor as indicated in serial no.01 of this BOQ. Control panel shall include indicative feature for Volt, Amp etc. Suitable canopy made of GI sheet or any other suitable material for rain protection is also includes in the scope of this item. Make: Falcon/Kirloskar/Grundfoss/Wilo/L&T/Equavelent as per pump's OEM reccomendation.

Supply, Installation and testing of 0.5 HP capacity open well submesrible pump to be installed in the existing open well (approximate well depth is 5.0 meter) as directed by department EIC. Flow shall be 80 lpm @ 20 meter head. Scope of this item also includes supply & installation of suitable control panel (having provision of start/on/off, Volt, amp indication etc ) along with control power cable of max length 20 Rmtr as per manufacturer recommendation. This work includes supply & installation of suitable HDPE/PVC flexible pipe of length not more than 12 meter. MOC: Body/base - CI impeller, bowl & shaft - SS Make:Falcon/Kirloskar/Grundfoss/Wilo/any equavelent make confirming to specification.

Supply, laying, installation and testing of GI pipe of nominal size 50 mm of Medium quality, class-B including all necessary fittings like bends, T- fittings, unioins required for the work,including testing the pipes and fittings for 10.00Kg/Sq.Cm hydralic pressure with a minimum period of two hours duration with cleanwater,including cutting, threading,jointingwithhempyarn,whitelead,jointingteflontape,chasingwalls and making good. Any MS items required for clamping & installation of pipe is in the scope of this item. GI piping work shall be coated with two coats of primer followed by two coats of enamel painting. Make: Tata/Jindal/Sail/Eqv

Supply, laying, installation and testing of GI pipe of nominal size 40 mm of Medium quality, class-B including all necessary fittings like bends, T- fittings, unioins required for the work,including testing the pipes and fittings for 10.00Kg/Sq.Cm hydralic pressure with a minimum period of two hours duration with cleanwater,including cutting, threading,jointingwithhempyarn,whitelead,jointingteflontape,chasingwalls and making good. Any MS items required for clamping & installation of pipe is in the scope of this item. GI piping work shall be coated with two coats of primer followed by two coats of enamel painting. Make: Tata/Jindal/Sail/Eqv

Supply, installation and testing of SS Ball valves of nominal size 50mm. It includes all fittings, tefflon tapes, jointing materials for leakproof operation. Make:Audco/Flowcon/Kirloskar/Zoloto/Deepak/Sant/Leader/Eqv

Supply, installation & testing of SS NRV (Non return valve) of nominal Size 50 mm. It includes all fittings, tefflon tapes, jointing materials for leakproof operation. Make:Audco/Flowcon/Kirloskar/Zoloto/Deepak/Eqv

Supply, Installation & testing of 40mm dia nominal size, copper alloy float Valves as per IS : 1703. Scope of this item includes installation of float valves in the existing roof top over head water tanks (approximate depth 2.0 meter) . This item includes all necessary fittings, reducer, tefflon tapes etc to make the leak proof joint of float valves.

Supply, Installation & testing of 1 inch (25mm) nominal size, copper alloy float Valves as per IS : 1703. Scope of this item includes installation of float valves in the existing roof top over head water tanks (approximate depth 2.0 meter) . This item includes all necessary fittings, reducer, tefflon tapes etc to make the leak proof joint of float valves.

Supply, installation, testing of Oil filled Pressure gauge. MOC: SS body, Range: 0 - 8 kg/cm2. This item also includes connecting syphon, isolation gauge/ball valve, necessary fittings etc to make the gauge joint leak proof and functional. Make: Waree/Baumer/H guru/Equvalent as approved by EIC.

Providing & laying in position of PCC concrete cement (1:3:6) including consolidation, finishing, curing etc., complete as per specifications. work to be used as supports for piping, pump base. Cost includes shuttering/centering etc.,

Supplying , laying/chasing on walls XLPE-FRLS copper conductor, stranded cable, armoured cable of following sizes & core multi stranded flexible copper conductor industrial cable of 1.1KV grade confirming to relevant IS 7098 code in on surface as required. Scope of this cable includes joining with outlet cable of serial no.01 item with leak tight joint as per manufacturer recommendation. Cable size: 2.5sqmm, 3 core. Approved makes:M/s Polycab/Universal cables/Gemscab/Fort Gloster/Nicco/KEC

Earth Excavation work by manual/mechanical means in all types of soils except hard rock soils for installation of under ground Pipe line at necessery areas. Excavation depth is not more than 1.0 meter from existing ground level.

Supply installation testing & commissioning of Multi grade sand cum activated carbon filter having a capacity to treat water for a flow rate of 150LPM or 9000LPH. MOC of filter: FRP vessel shall with stand to a hydrostatic pressure of 5Kg/cm2. Media: Layers of pebblels, coarse fine silex, coarse & fine sand etc., to be arrenged as per manufacturer recommendation. Frontol piping, multiport function valve, isolation valves, automatic air release valve, base support etc for regular operation & backwashing arrengement is in the scope of the work. Filter shall be capable of treating well water from a turbidity of 10 to 2 NTU approximately. Make: Pentair/Blue bird/paramount/Equavelent approved.

Supply installation testing & commissioning of activated carbon filter having a capacity to treat water for a flow rate of 150LPM or 9000LPH. MOC of filter: FRP vessel shall with stand to a hydrostatic pressure of 5Kg/cm2. Media: Layers of pebblels, coarse fine silex, sand & activated carbon etc., to be arrenged as per manufacturer recommendation. Frontol piping, multiport function valve, isolation valves, automatic air release valve, base support etc for regular operation & backwashing arrengement etc is in the scope of the work. Filter shall be capable of treating well water from a turbidity of 10 to 2 NTU approximately. Make: Pentair/Blue bird/paramont/Equavelent approved.