Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | NIJIL M L2 | VINODAN K L1 |
|---|---|---|---|---|---|
| 1.00Building Maintenance | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.15 | cum | 307.94 ₹352.9 | 293.28 ₹336.1 Lowest |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 0.88 | cum | 8,905.52 ₹7,836.86 | 8,481.45 ₹7,463.68 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 848.64 | kg | 157.97 ₹1,34,059.19 | 150.45 ₹1,27,677.44 Lowest |
| 1.00 | OD455392/2024-2025:51.20
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required.Providing and
fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved
by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the
sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25
microns minimum to avoid scratchesduring transportation and should be supplied in single
length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self
drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting tosize and shape wherever required. | 91.16 | per sqm | 485.15 ₹44,226.27 | 462.05 ₹42,120.48 Lowest |
| 1.00 | OD455628/2024-2025:Providing and fixing 150 mm UPVC square gutter pipe over GI clamp of same profile @ 1 mtr C/C | 20.9 | metre | 338.91 ₹7,083.22 | 322.77 ₹6,745.89 Lowest |
| 1.01 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | 12 | metre | 294.18 ₹3,530.16 | 280.17 ₹3,362.04 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 70.16 | sqm | 148.32 ₹10,406.13 | 141.26 ₹9,910.8 Lowest |
| 1.01 | 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 207.42 | sqm | 103.32 ₹21,430.63 | 98.4 ₹20,410.13 Lowest |
| 1.01 | 14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | 16.62 | sqm | 97.59 ₹1,621.95 | 92.94 ₹1,544.66 Lowest |
Tender Value
₹2.2 L
EMD Value
₹5,565
Closing Date
6 Mar 2025, 1:00 pmClosed
Santhosh.P
Assistant Engineer LID EW Koothuparamba Municipality
Koothuparamba Municipality proj. 289/2025 Mooryad central anganwadi sheet roofing-General Civil Work-1
2025_LSGD_742618_1
LSGD/CELSGD/TR/8647/2025
Open Tender
Civil Works - Buildings
Item Rate
270 days
Koothuparamba Municipality
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹5,565
Yes
27 Sept 2026
25 Feb 2025
7 Mar 2025
25 Feb 2025
6 Mar 2025
25 Feb 2025
Amount
Building Maintenance
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD455392/2024-2025:51.20 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
OD455628/2024-2025:Providing and fixing 150 mm UPVC square gutter pipe over GI clamp of same profile @ 1 mtr C/C
50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
OD455812/2024-2025: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.(MOD 50.6.7.1 of DAR)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
NIJIL M (BID ID -2140876)
Bidder Name
NIJIL M
VINODAN K
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1195744.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .