repair_works_Point-A

Amount

Supply and delivery of following materials at site :-

Multifunction meter PAC 3120 with integrated RS 485 port for MODBUS RTU Class 0.5 accuracy, screw terminals AC/DC wide voltage power supply 100 … 250 V ±10% 50/60Hz. (Make-Siemens. Type-7KM3120-0BA01-1DA0)

Temperature Controller 3 digit single display, RTD & Thermocouple I/P , 1 Relay (10A SPDT ) or SSR O/P (Make : GIC, PR 69)

Push Button Switch with one NC & one NO contact.

AC3 500 Amp power Contactor with auxiliary contacts 2NO & 2NC. Coil voltage 220-240V [Make : Siemens, Model-3RT1076-6A. 368K]

Repairing of the existing panel by fitting of the above supplied materials (as in item no.1.00) and sevicing spares in existing position making internal wiring and connection by supplying all fixing materials such as screws, nut-bolts, washers, cable tie, pvc tape, PVC duct with cover etc. and testing the same as per & up to the entire satisfaction of EIC.

Supply and delivery of 3" Dia Gi pipe (Class Medium).

Repairing of existing lubricating pipe line by above suppied of 3" GI Pipe after dismantling of damaged portion pipeline by pipeline expert mechanic including the cost of grinding, welding, checking of alignment including making of concrete pipe support & supply of bends, flanges, sockets & all fitting Materials and other necessary materials & labour required to complete the work in all respect and checking the functioning of whole system as per direction of EIC.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.

For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg / m

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)

In Roof With 0.80 mm thick sheet.

In Wall With 0.80 mm thick sheet.

Making necessary bricks wall and other civil works to complete of MS structural of Shed all complete as per direction of EIC.

Painting the above structural of Shed and existing Pumping Machineries includes Pumps, Valves, Motors, Pipes ,lighting pole, chequredplates, support & railing of substation all complete after scrapping rubbing two coats of primer, and application of synthetic enamel as per desired shade all complete to the entire satisfaction of the EIC.

GST @18% of Total Value in Amount

CESS @1% of Total Value in Amount

MAHADEV ENTERPRISE (BID ID -6244927)

ORIENTAL ENGINEERING CO. (BID ID -6223764)

WEST BENGAL ENGINEERING CO. (BID ID -6229606)