Construction of Semi Urban Police Station (P+2) at THASARA Including Electrification )

Name of Work : Construction Of Semi Urban Police station (P+2) at Thasara Dist:-Kheda (Incl. Electrification)

SOR 2024-25 (Kheda)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs

Description Total Qty Unit Rate Rate In Word Rs. Amount

1 Excavation for foundation upto 1.5 mt depth including sorting 1605.00 Cmt 115.92 Rs. One Hundred Fifteen and

out and stacking of useful materials and disposing off the Paise Ninty Two only

excavated stuff upto Any lead & Lift (A) LOOSE OR SOFT

2 Excavation for foundation in Dense or Hard soil From 1.5 to 3.00 402.00 Cmt 160.77 Rs. One Hundred Sixty and Paise

mt depth including sorting out and stacking of useful materials and Seventy Seven only

disposing of the excavated stuff upto ANY lead & Left.

3 Excavation for foundation in Loose or soft soil From 1.5 to 3.00 51.00 Cmt 172.50 Rs. One Hundred Seventy Two and

mt depth including sorting out and stacking of useful materials and Paise Fifty only

disposing of the excavated stuff upto ANY lead & Left.

4 Providing & laying Controlled CEMENT CONCRETE 1:3:6 ( 1 77.00 Cmt 2976.00 RS: Two Thousand Nine

cement ; 3 coarse sand; 6 crushed stone aggregates and curing Hundred Seventy Six only

complete including cost of formwork in foundation and plinth.

5 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse 148.00 Cmt 2653.67 RS: Two Thousand Six

sand; 8 crushed stone aggregates 40mm nominal size) and curing Hundred Fifty Three and Paise

complete including cost of form work in foundation and plinth Sixty Seven only

6 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse 40.00 Cmt 2492.51 RS: Two Thousand Four

sand : 10 graded stone aggrigates of 40 mm nominal size) curing Hundred Ninty Two and Paise

complete inculuding cost of formwork in FOUNDATION AND Fifty One only

7 Providing & laying Controlled Cement Concrete M 150 and curing 83.00 Cmt 3942.50 RS: Three Thousand Nine

complete including cost of Formwork of Plywood only with fair finish so Hundred Forty Two and Paise

as to give fair finish and Excluding cost of reinforcement for reinforced Fifty only

concrete work in foundation & plinth. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as

Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

8 Providing & laying Controlled CEMENT CONCRETE M-300 and 30.00 Cmt 4712.94 RS: Four Thousand Seven

finishing smooth with curing etc complete including the cost of Hundred Twelve and Paise Ninty

plywood formwork only with fair finish but excluding the cost of Four only

reinforcement in FOOTING base of columns and Mass concrete.

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

9 Provinding and Laying controlled cement concrete M-300 and 33.00 Cmt 8020.52 RS: Eight Thousand Twenty

Finishing smooth with curing etc.complete. Including the cost and Paise Fifty Two only

ofplywood formwork only with fair finish but excluding the cost of

reinforcement for R.C.C work in Horizontal & Vertical WALLS

heving any cross section area of Wall f. Rate are inclusive of

providing and mixing plastisizer of approved make in propertion as

per mix design.

10 Providing & laying Controlled CEMENT CONCRETE M-250 and 192.00 Cmt 4550.55 RS: Four Thousand Five

finishing smooth with curing etc complete including the cost of Hundred Fifty and Paise Fifty Five

plywood formwork only with fair finish but excluding the cost of only

reinforcement in FOOTING base of columns and Mass concrete.

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

11 Providing & laying controlled CEMENT CONCRETE of M- 250 and 25.00 Cmt 8613.29 RS: Eight Thousand Six

Finishing smooth with curing complete including the cost of plywood Hundred Thirteen and Paise

formwork only with fair finish but excluding the cost of reinforcement Twenty Nine only

for RCC work in Column up to plinth for any cross sectional area. of

Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

12 Providing & laying Controlled CEMENT CONCRETE M-250 & 30.00 Cmt 7021.28 RS: Seven Thousand Twenty

finishing smooth with curing etc. complete including cost of plywood One and Paise Twenty Eight only

formwork only with fair finish but excluding cost of reinforcement For

Plinth Beam Having any C/s Area. Rate are inclusive of Pro.& Mix

plastisizer of approved make in proportion as per mix design.

13 Providing and laying Controlled cement concrete M-250 and 5.00 Cmt 8737.52 RS: Eight Thousand Seven

finishing smooth with curing etc.. complete including the cost of Hundred Thirty Seven and Paise

plywood formwork only with fair finish exculding the cost of Fifty Two only

reinforcement of BEAMS having any cross sectional area of Beam

For GROUND FLOOR. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

14 Brick work using common burnt clay building bricks having crushing 341.00 Cmt 3981.21 RS: Three Thousand Nine

strength not less than 35 Kg/Sq.cm.in foundation and plinth in Hundred Eighty One and Paise

cement mortar 1:6 (1-cement:6-coarse sand) (B) Conventional Twenty One only

15 Provinding and Laying controlled cement concrete M-250 and with 9.00 Cmt 5906.91 RS: Five Thousand Nine

curing etc.complete. Including the cost of plywood formwork only with Hundred Six and Paise Ninty One

fair finish but excluding the cost of reinforcement for R.C.C work in only

Coping . Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

16 Provinding and Laying controlled cement concrete M-200 and with 15.00 Cmt 5849.63 RS: Five Thousand Eight

curing etc.complete. Including the cost of plywood formwork only with Hundred Forty Nine and Paise

fair finish but excluding the cost of reinforcement for R.C.C work in Sixty Three only

Coping . Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

17 Filling available excavated earth (excluding rock) in 948.00 Cmt 129.10 Rs. One Hundred Twenty Nine and

trenches. plinth, sides of foundations etc. in layers not exceeding 20 Paise Ten only

cm. in depth consolidating each disposited layer by ramming

18 Filling in Foundation and Plinth with selected soil or murrum i n 790.00 Cmt 279.23 Rs. Two Hundred Seventy Nine

layers of 20cms. thickness including watering, ramming, and Paise Twenty Three only

consolidating and dressing etc.complete As Per Engineer In-Ccharge.

19 FILLING in plinth with SAND under floors including watering, raming 42.00 Cmt 455.63 Rs. Four Hundred Fifty Five and

consolidating and dressing etc. complete. Paise Sixty Three only

20 Applying general insecticide pest control treatment to floors, 430.00 Smt 88.40 Rs. Eighty Eight and Paise Forty

cupboards etc including labour material etc. complete. Using only

Heptachloride 20 EC. As Per 6113_pests Consentration Weight

percent is recommended one litre chemical emulsion dillute with

liter of water will give. Total dillute concrentration will be 40 litre

inclusive of one litre chemical emulsion appication 0.5 Litre chemical /

Sqm of surface is recommended as per I.S code

21 Providing & laying controlled CEMENT CONCRETE of M- 200 and 28.00 Cmt 10301.99 RS: Ten Thousand Three

Finishing smooth with curing complete including the cost of plywood Hundred One and Paise Ninty

formwork only with fair finish but excluding the cost of reinforcement Nine only

for RCC work in Column For GROUND FLOOR for any cross

sectional area. of Column Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

22 Providing & laying controlled CEMENT CONCRETE of M- 200 and 28.00 Cmt 10341.39 RS: Ten Thousand Three

Finishing smooth with curing complete including the cost of plywood Hundred Forty One and Paise

formwork only with fair finish but excluding the cost of reinforcement Thirty Nine only

for RCC work in Column For FIRST FLOOR for any cross sectional

area. of Column Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

23 Providing & laying controlled CEMENT CONCRETE of M- 200 and 26.00 Cmt 10380.79 RS: Ten Thousand Three

Finishing smooth with curing complete including the cost of plywood Hundred Eighty and Paise

formwork only with fair finish but excluding the cost of reinforcement Seventy Nine only

for RCC work in Column For SECOND FLOOR for any cross

sectional area. of Column Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

24 Providing & laying controlled CEMENT CONCRETE of M- 200 and 4.00 Cmt 10420.19 RS: Ten Thousand Four

Finishing smooth with curing complete including the cost of plywood Hundred Twenty and Paise

formwork only with fair finish but excluding the cost of reinforcement Ninteen only

for RCC work in Column For THIRD FLOOR for any cross sectional

area. of Column Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

25 Providing & laying controlled CEMENT CONCRETE of M- 200 and 4.00 Cmt 10459.59 RS: Ten Thousand Four

Finishing smooth with curing complete including the cost of plywood Hundred Fifty Nine and Paise Fifty

formwork only with fair finish but excluding the cost of reinforcement Nine only

for RCC work in Column For FOURTH FLOOR for any cross

sectional area. of Column Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

26 Providing and laying Controlled cement concrete M-200 and 36.00 Cmt 8680.25 RS: Eight Thousand Six

finishing smooth with curing etc.. complete including the cost of Hundred Eighty and Paise Twenty

plywood formwork only with fair finish exculding the cost of Five only

reinforcement of BEAMS having any cross sectional area of Beam

For GROUND FLOOR. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

27 Providing and laying Controlled cement concrete M-200 and 36.00 Cmt 8719.64 RS: Eight Thousand Seven

finishing smooth with curing etc.. complete including the cost of Hundred Ninteen and Paise Sixty

plywood formwork only with fair finish exculding the cost of Four only

reinforcement of BEAMS having any cross sectional area of Beam

For FIRST FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

28 Providing and laying Controlled cement concrete M-200 and 30.00 Cmt 8759.05 RS: Eight Thousand Seven

finishing smooth with curing etc.. complete including the cost of Hundred Fifty Nine and Paise Five

plywood formwork only with fair finish exculding the cost of only

reinforcement of BEAMS having any cross sectional area of Beam

For SECOND FLOOR. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

29 Providing and laying Controlled cement concrete M-200 and 4.00 Cmt 8798.45 RS: Eight Thousand Seven

finishing smooth with curing etc.. complete including the cost of Hundred Ninty Eight and Paise

plywood formwork only with fair finish exculding the cost of Forty Five only

reinforcement of BEAMS having any cross sectional area of Beam

For THIRD FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

30 Providing and laying Controlled cement concrete M-200 and 5.00 Cmt 8837.85 RS: Eight Thousand Eight

finishing smooth with curing etc.. complete including the cost of Hundred Thirty Seven and Paise

plywood formwork only with fair finish exculding the cost of Eighty Five only

reinforcement of BEAMS having any cross sectional area of Beam

For FOURTH FLOOR. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

31 Providing & Laying Controlled Cement Concrete M-250 & and 9.00 Cmt 7702.61 RS: Seven Thousand Seven

finishing smooth with Curing Complete including the cost of plywood Hundred Two and Paise Sixty

formwork only with fair finish but excluding cost of the reinforcement One only

for RCC Work in SLAB having thickness of 13cm TO 15cm at

GROUND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

32 Providing & Laying Controlled Cement Concrete M-250 & and 15.00 Cmt 8126.51 RS: Eight Thousand One

finishing smooth with Curing Complete including the cost of plywood Hundred Twenty Six and Paise

formwork only with fair finish but excluding cost of the reinforcement Fifty One only

for RCC Work in SLAB having thickness of 10cm TO 13cm at

GROUND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

33 Providing & Laying Controlled Cement Concrete M-200 & and 55.00 Cmt 8018.25 RS: Eight Thousand Eighteen

finishing smooth with Curing Complete including the cost of plywood and Paise Twenty Five only

formwork only with fair finish but excluding cost of the reinforcement

for RCC Work in SLAB having thickness of 10cm TO 13cm at

GROUND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

34 Providing & Laying Controlled Cement Concrete M-200 & and 55.00 Cmt 8057.65 RS: Eight Thousand Fifty

finishing smooth with Curing Complete including the cost of plywood Seven and Paise Sixty Five only

formwork only with fair finish but excluding cost of the reinforcement

for RCC Work in SLAB having thickness of 10cm TO 13cm at

FIRST FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

35 Providing & Laying Controlled Cement Concrete M-200 & and 46.00 Cmt 8097.05 RS: Eight Thousand Ninty

finishing smooth with Curing Complete including the cost of plywood Seven and Paise Five only

formwork only with fair finish but excluding cost of the reinforcement

for RCC Work in SLAB having thickness of 10cm TO 13cm at

SECOND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

36 Providing & Laying Controlled Cement Concrete M-200 & and 5.00 Cmt 8136.45 RS: Eight Thousand One

finishing smooth with Curing Complete including the cost of plywood Hundred Thirty Six and Paise

formwork only with fair finish but excluding cost of the reinforcement Forty Five only

for RCC Work in SLAB having thickness of 10cm TO 13cm at

THIRD FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

37 Providing & Laying Controlled Cement Concrete M-200 & and 6.00 Cmt 8175.85 RS: Eight Thousand One

finishing smooth with Curing Complete including the cost of plywood Hundred Seventy Five and Paise

formwork only with fair finish but excluding cost of the reinforcement Eighty Five only

for RCC Work in SLAB having thickness of 10cm TO 13cm at

FOURTH FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

38 Providing & Laying Controlled Cement Concrete M-200 & and 11.00 Cmt 7594.35 RS: Seven Thousand Five

finishing smooth with Curing Complete including the cost of plywood Hundred Ninty Four and Paise

formwork only with fair finish but excluding cost of the reinforcement Thirty Five only

for RCC Work in SLAB having thickness of 13cm TO 15cm at

GROUND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

39 Providing & Laying Controlled Cement Concrete M-200 & and 4.00 Cmt 7633.75 RS: Seven Thousand Six

finishing smooth with Curing Complete including the cost of plywood Hundred Thirty Three and Paise

formwork only with fair finish but excluding cost of the reinforcement Seventy Five only

for RCC Work in SLAB having thickness of 13cm TO 15cm at

FIRST FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

40 Providing & Laying Controlled Cement Concrete M-200 & and 2.00 Cmt 7673.15 RS: Seven Thousand Six

finishing smooth with Curing Complete including the cost of plywood Hundred Seventy Three and Paise

formwork only with fair finish but excluding cost of the reinforcement Fifteen only

for RCC Work in SLAB having thickness of 13cm TO 15cm at

SECOND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

41 Providing & Laying Controlled Cement Concrete M-200 & and 2.00 Cmt 7712.55 RS: Seven Thousand Seven

finishing smooth with Curing Complete including the cost of plywood Hundred Twelve and Paise Fifty

formwork only with fair finish but excluding cost of the reinforcement Five only

for RCC Work in SLAB having thickness of 13cm TO 15cm at

THIRD FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

42 Providing and laying Controlled cement concrete M-200 for R.C.C. 2.00 Cmt 8404.01 RS: Eight Thousand Four

LINTEL including finishing smooth with curing etc. Complete including Hundred Four and Paise One

the cost of plywood formwork only with fair finish but excluding the only

cost of reinforcement for GROUND FLOOR Providing and Mixing

Plasticiser in cement concrete including rate of labour,material etc.as

per direction of Engineer in charge.

43 Providing and laying Controlled cement concrete M-200 for R.C.C. 4.00 Cmt 8443.41 RS: Eight Thousand Four

LINTEL including finishing smooth with curing etc. Complete including Hundred Forty Three and Paise

the cost of plywood formwork only with fair finish but excluding the Forty One only

cost of reinforcement for FIRST FLOOR Providing and Mixing

Plasticiser in cement concrete including rate of labour,material etc.as

per direction of Engineer in charge.

44 Providing and laying Controlled cement concrete M-200 for R.C.C. 4.00 Cmt 8482.81 RS: Eight Thousand Four

LINTEL including finishing smooth with curing etc. Complete including Hundred Eighty Two and Paise

the cost of plywood formwork only with fair finish but excluding the Eighty One only

cost of reinforcement for SECOND FLOOR Providing and Mixing

Plasticiser in cement concrete including rate of labour,material etc.as

per direction of Engineer in charge.

Description Total Qty Unit Rate Rate In Word Rs. Amount

45 Provinding and Laying controlled cement concrete M-250 for 5.00 Cmt 9362.84 RS: Nine Thousand Three

reinforced conerete CHHAJJAS not exceeding 10cm thickness up to Hundred Sixty Two and Paise

floor two level including finishing the exposed surface with cement Eighty Four only

mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface

,centering and plywood .formwork only with fair finish and curing

complete. excluding cost of reinforcement for ALL FLOOR. Providing

and Mixing Plasticiser in cement concrete including rate of

labour,material etc.as per direction of Engineer in charge.

46 Provinding and Laying controlled cement concrete M-250 and 23.00 Cmt 9510.46 RS: Nine Thousand Five

Finishing smooth with curing etc.complete. Including the cost Hundred Ten and Paise Forty Six

ofplywood formwork only with fair finish but excluding the cost of only

reinforcement for R.C.C work in WALLS heving any cross section

area of Wall for Foundation And Plinth Rate are inclusive of

providing and mixing plastisizer of approved make in propertion as

per mix design.

47 Provinding and Laying controlled cement concrete M-200 and 9.00 Cmt 9569.56 RS: Nine Thousand Five

Finishing smooth with curing etc.complete. Including the cost Hundred Sixty Nine and Paise

ofplywood formwork only with fair finish but excluding the cost of Fifty Six only

reinforcement for R.C.C work in Vertical & Horizontal WALLS

heving any cross section area of Wall for any height Rate are

inclusive of providing and mixing plastisizer of approved make in

propertion as per mix design.

48 Providing and laying Controlled cement concrete M-200 including 17.00 Cmt 8123.84 RS: Eight Thousand One

finishing smooth for R.C.C. STAIR CASE including centering plywood Hundred Twenty Three and Paise

formwork only with fair finish and curing etc. Complete excluding cost Eighty Four only

of reinforcement for ALL FLOORS. Providing and Mixing Plasticiser

in cement concrete including rate of labour,material etc.as per

direction of Engineer in charge.

49 Brick Bat Filling 40mm thick at Requred Depth as per Drawings 16.00 Cmt 489.79 Rs. Four Hundred Eighty Nine and

and Specifications and Direction of Engg - in - Charge. Paise Seventy Nine only

50 Honey Comb common burnt clay building bricks having crushing 6.00 Cmt 2667.41 RS: Two Thousand Six

strength not less than 35 Kg./Sq. cm. In FOUNDATION AND Hundred Sixty Seven and Paise

PLINTH in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Forty One only

Conventional Bricks )

51 BRICK WORK using common burnt clay building bricks having 68.00 Cmt 4246.86 RS: Four Thousand Two

crushing strength not less than 35 Kg./Sq. cm. In in cement Hundred Forty Six and Paise

mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Bricks ) for Eighty Six only

Ground Floor. Mortar shall be prepared by mixture machine only.

Description Total Qty Unit Rate Rate In Word Rs. Amount

52 BRICK WORK using common burnt clay building bricks having 133.00 Cmt 4286.65 RS: Four Thousand Two

crushing strength not less than 35 Kg./Sq. cm. In in cement Hundred Eighty Six and Paise

mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Bricks ) for Sixty Five only

First Floor. Mortar shall be prepared by mixture machine only.

53 BRICK WORK using common burnt clay building bricks having 114.00 Cmt 4326.44 RS: Four Thousand Three

crushing strength not less than 35 Kg./Sq. cm. In in cement Hundred Twenty Six and Paise

mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Bricks ) for Forty Four only

Second Floor. Mortar shall be prepared by mixture machine only.

54 BRICK WORK using common burnt clay building bricks having 33.00 Cmt 4366.23 RS: Four Thousand Three

crushing strength not less than 35 Kg./Sq. cm. In in cement Hundred Sixty Six and Paise

mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Bricks ) for Twenty Three only

Third Floor. Mortar shall be prepared by mixture machine only.

55 BRICK WORK using common burnt clay building bricks having 11.00 Cmt 4406.02 RS: Four Thousand Four

crushing strength not less than 35 Kg./Sq. cm. In in cement Hundred Six and Paise Two only

mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Bricks ) for

Fourth Floor. Mortar shall be prepared by mixture machine only.

56 HALF BRICK masonary in common brunt clay building bricks 4.00 Smt 593.90 Rs. Five Hundred Ninty Three and

having crushing strength not less than 35 kg./sq.cm.in cement Paise Ninty only

mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for

Foundation & Plinth.. Mortar shall be prepared by mixture

57 HALF BRICK masonary in common brunt clay building bricks 75.00 Smt 651.16 Rs. Six Hundred Fifty One and

having crushing strength not less than 35 kg./sq.cm.in cement Paise Sixteen only

mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for

First Floor. Mortar shall be prepared by mixture machine only .

58 HALF BRICK masonary in common brunt clay building bricks 75.00 Smt 657.10 Rs. Six Hundred Fifty Seven and

having crushing strength not less than 35 kg./sq.cm.in cement Paise Ten only

mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for

Second Floor. Mortar shall be prepared by mixture machine only .

59 HALF BRICK masonary in common brunt clay building bricks 20.00 Smt 663.04 Rs. Six Hundred Sixty Three and

having crushing strength not less than 35 kg./sq.cm.in cement Paise Four only

mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for

Third Floor. Mortar shall be prepared by mixture machine only .

Description Total Qty Unit Rate Rate In Word Rs. Amount

60 Providing 10 mm thick cement PLASTER in single coat on 465.00 Smt 215.31 Rs. Two Hundred Fifteen and

ceilings for interior plastering and finished even & smooth in Paise Thirty One only

C.M. 1:3 ( 1 cement : 4 sand ) including finishing with a floating

coat of neat cement slurry at Ground Floor. Mortar shall be

prepared by mixture machine only.

61 Providing 10 mm thick cement PLASTER in single coat on 410.00 Smt 240.53 Rs. Two Hundred Forty and Paise

ceilings for interior plastering and finished even & smooth in Fifty Three only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating

coat of neat cement slurry at First Floor. Mortar shall be

prepared by mixture machine only.

62 Providing 10 mm thick cement PLASTER in single coat on 400.00 Smt 265.75 Rs. Two Hundred Sixty Five and

ceilings for interior plastering and finished even & smooth in Paise Seventy Five only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating

coat of neat cement slurry at Second Floor. Mortar shall be

prepared by mixture machine only.

63 Providing 10 mm thick cement PLASTER in single coat on 40.00 Smt 290.97 Rs. Two Hundred Ninty and Paise

ceilings for interior plastering and finished even & smooth in Ninty Seven only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating

coat of neat cement slurry at Third Floor. Mortar shall be

prepared by mixture machine only.

64 Providing 10 mm thick cement PLASTER in single coat on 37.00 Smt 316.19 Rs. Three Hundred Sixteen and

ceilings for interior plastering and finished even & smooth in Paise Ninteen only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating

coat of neat cement slurry at Fourth Floor. Mortar shall be

prepared by mixture machine only.

65 Providing 15 mm thick cement PLASTER in single coat on brick 608.00 Smt 219.41 Rs. Two Hundred Ninteen and

or concrete wall for interior plastering and finished even and Paise Forty One only

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with

floating coat of neat cement slurry at Ground Floor. Mortar

shall be prepared by mixture machine only.

66 Providing 15 mm thick cement PLASTER in single coat on brick 920.00 Smt 246.52 Rs. Two Hundred Forty Six and

or concrete wall for interior plastering and finished even and Paise Fifty Two only

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with

floating coat of neat cement slurry at First Floor.Mortar shall be

prepared by mixture machine only.

Description Total Qty Unit Rate Rate In Word Rs. Amount

67 Providing 15 mm thick cement PLASTER in single coat on brick 1080.00 Smt 273.63 Rs. Two Hundred Seventy Three

or concrete wall for interior plastering and finished even and and Paise Sixty Three only

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with

floating coat of neat cement slurry at Second Floor. Mortar

shall be prepared by mixture machine only.

68 Providing 15 mm thick cement PLASTER in single coat on brick 220.00 Smt 300.74 Rs. Three Hundred and Paise

or concrete wall for interior plastering and finished even and Seventy Four only

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with

floating coat of neat cement slurry at Third Floor. Mortar shall

be prepared by mixture machine only.

69 Providing 15 mm thick cement PLASTER in single coat on brick 55.00 Smt 327.85 Rs. Three Hundred Twenty Seven

or concrete wall for interior plastering and finished even and and Paise Eighty Five only

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with

floating coat of neat cement slurry at Fourth Floor. Mortar

shall be prepared by mixture machine only.

70 Providing 20 mm thick SAND FACED cement Plaster on walls 1118.00 Smt 332.33 Rs. Three Hundred Thirty Two and

above ground level consisting 12 mm thick backing coat of C.M. Paise Thirty Three only

1: 3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of C.M. 1:1

( 1 cement : 1 sand ) etc. Complete for any height. Mortar shall

be prepared by mixture machine only. Plaster should be done by

71 Synthetic Texture Plaster with Double Coat Smooth plaster : 1400.00 Smt 520.44 Rs. Five Hundred Twenty and

Providing 20mm thick cement plaster in single coat plastering Paise Forty Four only

upto floor two level Outside and finished even and smooth in (i)

Cement mortar 1:3 (1-cement : 3-sand) as Base Coat and

providing 2-3 mm thick synthetic texture plaster of approved

texture (Material Shall be Used as Approved By GSPHCL Only )

including cost of all materials, labour, conveyance, loading and

unloading, taxes, royalties, scaffolding, watering etc.complete for

any Height as per Drawing and instructions of Engineer -in -

Description Total Qty Unit Rate Rate In Word Rs. Amount

72 Providing 10 mm thick cement PLASTER in single coat of 388.00 Smt 239.23 Rs. Two Hundred Thirty Nine and

interior plastering and finished even and smooth in cement Paise Twenty Three only

mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of

neat cement slurry including providing and mixing Water

Proofing material in C.M. in proportion recommended by the

manufactures for all floors.Mortar shall be prepared by mixture

73 Providing and Laying Acrylic base (Zycosil or equivalent) Water 116.00 Smt 110.70 Rs. One Hundred Ten and Paise

Proofing paint treatment treatment in two coats of vertical and Seventy only

horizontal surface of depressed portion of Bath/W.C. as directed

by engineer in charge.This treatment shall be carried out over &

above water proofing plaster.

74 Providing Cement vata (10 cm x 10 cm size) quarter round in 368.00 Rmt 23.45 Rs. Twenty Three and Paise

cement mortar 1:1 including neat cement finishing, watering Forty Five only

75 Suppllying and Filling Cinder in Sunk Portions for All Lead and 10.00 Cmt 791.68 Rs. Seven Hundred Ninty One and

Lift etc. Complete. Paise Sixty Eight only

76 Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 70.00 Smt 348.08 Rs. Three Hundred Forty Eight and

2 course sand :4 graded stone aggregate 20mm nominal size) Paise Eight only

laid in one layer finished with a floating coat of neat cement. (B)

77 Provinding and fixing chicken wire mesh Jali 0.18 Gauge and 350.00 Smt 64.06 Rs. Sixty Four and Paise Six

0.18mt wide with necessary screws and nails to joint or crack only

between R.C.C. column and brick work etc. complete as per

Engineer-in-charge.wire mesh jail Shall confrom to relevant is

78 Providing & Lay 24" x 24" Double Charge vitrified 8 to 10 mm 780.00 Smt 1498.40 RS: One Thousand Four

thick tile flooring over 20 mm (average) base of cement mortar Hundred Ninty Eight and Paise

1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on Forty only

existing flooring by adhesive including dismentaling of existing

flooring and material jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete

for light shade

79 Providing and laying double charge Vitrified tiles 8mm to 10mm 70.00 Smt 1392.20 RS: One Thousand Three

thicke of approved brand and manufacture with sizing in skirting Hundred Ninty Two and Paise

of 10mm thick cement mortar plaster 1:3(-1-cement;3-coarse Twenty only

sand) or jointed with white cement slurry including flush

pointing, rubbing and curing etc .complete.

Description Total Qty Unit Rate Rate In Word Rs. Amount

80 Providing & Lay 24" x 24" Anti skid vitrified 8 to 10 mm thick tile 70.00 Smt 1383.99 RS: One Thousand Three

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 Hundred Eighty Three and Paise

cement: 6 coarse sand) on new surface orfixing on existing Ninty Nine only

flooring by adhesive including dismentaling of existing flooring

and material jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for light

81 Proviidng and Laying coloured glazed tiles of the size 370.00 Smt 1403.33 RS: One Thousand Four

300mmx600mmx8mm in skirting,risers of steps and dedo on Hundred Three and Paise Thirty

10mm thick cement plaster 1:3(1cement:3 coarse sand)& jointed Three only

with white cement slurry

82 Providing and laying 25mm thick one edge machine cut rough 350.00 Smt 676.05 Rs. Six Hundred Seventy Six and

kota stone flooring (other edge chisel dressed) over 20mm thick Paise Five only

base of cement mortar 1:5 including pointing with 1:2 etc

complete (25mm thick)

83 Providing and Fixing Granite Telephonic Black Colour 18 mm 231.50 Smt 2428.00 RS: Two Thousand Four

thick for jambs and sills of doors & windows using neat cement Hundred Twenty Eight only

slurry laid over 20 mm average base of cement mortar 1:1(1

cement:1 Coarse Sand) and jointed with grey cement slurry

including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc.

complete(with base of neat cement) as per direction of Engineer

in charge including fully rounding the exposed edges as

84 Pro and Laying 25mm thick Doubel Pre polished ( Dimond 95.00 Smt 1078.70 RS: One Thousand Ten

polished ) polished kota stone flooring over average 20mm thick Hundred Seventy Eight and Paise

base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) and Seventy only

jointeed with gray cement slarry including rubbing and polishing

etc. complete All kota stone edge shall be hand cutting Machine

Cut shall be not allowed..

85 Pro and Laying Doubel Pre polished ( Dimond polished ) polished 6.00 Smt 1215.70 RS: One Thousand Two

kota stone slab 25mm thick in risers of steps.dedo,Skirting and Hundred Fifteen and Paise

pillars laid on 10mm thick cement mortar 1:3 ( 1 cement : 3 coars Seventy only

sand ) and jointed with gray cement slarry including rubbing &

polishing etc. complete

Description Total Qty Unit Rate Rate In Word Rs. Amount

86 Providing and fixing Alluminium section window having extruded 187.00 Smt 1568.27 RS: One Thousand Five

Aluminum Colour anodized section frame main outer size 95mm Hundred Sixty Eight and Paise

x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Twenty Seven only

Kg/mt), horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters.of horizontal member

size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with colour anodized aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as

per details With Both Side Locking Arrangment

87 Providing and fixing standard extruded of alluminium section of size 5.00 Smt 1163.92 RS: One Thousand One

63 * 38.10 * 1.2 mm ( Jindal section NO:2434,@Wt 0.643 Kg/RMT Hundred Sixty Three and Paise

)with colour aNOdized alluminium frame for ventilation with 5 mm Ninty Two only

thick frosted glass as details etc complete for ventilation

88 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush 31.00 Smt 11082.31 RS: Eleven Thousand Eighty

Door Shutter with 1mm Thick Laminates on Both Side of Shutter. Two and Paise Thirty One only

Making / Construction of Flush Door is with Pine or southern Yellow

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face

Veneer on Both Side with Lock rail on Center. ........

..........Flush Door Provide with Teak wood beading patti (32mm X

12mm) on Peripheries of Flush Door with Door Frame of Non Teak

Solid Wood of size 150mm x 70mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of biological agent

like termite, borers, decay, fungi and harmful insects also warranty

against seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press method.

Shutter shall be.........

............... brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc. Rates are also Inclusive of all

Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) &

No of 6 Inch S.S. but Hinges, ...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

................100mm x 75 mm x 3mm thick, required Screw & Nails per

Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm

Long, (3) Double Leg Heavy Push Door Stopper 2 No & (4) Handle

No, 150mm Long X 10mm thick. Door are Fixing as per Details ...........

..............Drawing & Instruction of Engineer in charge. All Materials

Used Shall be as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog Maked

Only.Rate Including Bedding Patti 40 x 10mm

89 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush 65.00 Smt 8399.74 RS: Eight Thousand Three

Door Shutter with 1mm Thick Laminates on Both Side of Shutter. Hundred Ninty Nine and Paise

Making / Construction of Flush Door is with Pine or southern Yellow Seventy Four only

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face

Veneer on Both Side with Lock rail on Center. ........

..........Flush Door Provide with Teak wood beading patti (32mm X

12mm) on Peripheries of Flush Door with Door Frame of Non Teak

Solid Wood of size 100mm x 60mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of biological agent

like termite, borers, decay, fungi and harmful insects also warranty

against seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press method.

Shutter shall be.........

............... brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc. Rates are also Inclusive of all

Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) &

No of 6 Inch S.S. but Hinges, ...........

................100mm x 75 mm x 3mm thick, required Screw & Nails per

Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm

Long, (3) Double Leg Heavy Push Door Stopper 2 No & (4) Handle

No, 150mm Long X 10mm thick. Door are Fixing as per Details ...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

..............Drawing & Instruction of Engineer in charge. All Materials

Used Shall be as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog Maked

Only.Rate Including Bedding Patti 40 x 10mm

90 Provinding and Laying 18 mm thick Telephonic black Granite Stone 84.00 Smt 2128.80 RS: Two Thousand One

Slab Flooring over 20mm thick average base of C.M. 1:6 (1cement : Hundred Twenty Eight and Paise

6 coarse sand) laid and jointed with grey cement slury including Eighty only

Rubbing and Polishing etc. Complete for All Floors.

91 Provinding and Laying 18 mm thick Telephonic black Granite stone 30.00 Smt 2265.83 RS: Two Thousand Two

slab in Skirting / Dado over 10mm thick average base of C.M. 1:3 Hundred Sixty Five and Paise

(1:cement :3 coarse sand) laid and jointed with grey cement slury Eighty Three only

including Rubbing and Polishing etc. Complete for All Floors.

92 Moulding Of Kota Stone/Granite Stair Trade Complete As Per 156.00 Rmt 129.95 Rs. One Hundred Twenty Nine and

Direction Of Engineer In Charge Paise Ninty Five only

93 Pro. 3 Nos Groove In Total Length Of Staircase Tread Of Size 156.00 Rmt 82.80 Rs. Eighty Two and Paise Eighty

10mm*10mm Finished Smooth In Parallel Line , Equally Spaced As only

Per Direction Of Engineer In-Charge In All Type Of Flooring , Etc.

94 Providing & Fixing Granite shelves of 18 mm thk For Bath 4.00 Smt 2115.40 RS: Two Thousand One

room & wash basin only with Moulding on al sides incl. making Hundred Fifteen and Paise Forty

Grooves in the wall and then making it good as per Engi.in only

95 Providing and fixing solid PVC Flush Door shutter 24mm thick. 26.00 Smt 4511.18 RS: Four Thousand Five

made from Co-extruded three layer rigid PVC foam sheet(single Hundred Eleven and Paise

Extruded) with density not less than 600kg/cbm outer layer (0.8- Eighteen only

1mm)thick should be rigid PVC with density of not less than

1400kg/cbm. Door should be water proof, Termite proof, fire retardant

& having good screw holding capacity(200 kgf). Providing and fixing

100% Solid Wood Plastic composite (WPC) Door Frame

90mmx45mm made from wood plastic composite(single Extruded

Process)material with density 780kg/cbm. As per drawing as directed

by the engineer in charge.including PVC beading patti 40x10mm

Description Total Qty Unit Rate Rate In Word Rs. Amount

96 Providing and fixing rolling shutters of approved make made of 48.00 Smt 3468.72 RS: Three Thousand Four

80 mm wide M.S. laths inter-locked together through their entire Hundred Sixty Eight and Paise

length and jointed together at the ends by end locks mounted on Seventy Two only

specially designed pipe shaft with bracket plates, guide channels

and arragements for inside and outside locking with pushpull

operation including the cost of hood cover and spring etc.

complete. (B) Shutters having width 3.5 M.and above

97 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste 100.00 Rmt 471.36 Rs. Four Hundred Seventy One

pipe with ' O ' Ring 110 mm dia. of ISI13592/92-2013 (Reaffirmed and Paise Thirty Six only

2018) or its relevant & latest edition & Pipe fixing for Vertical Drain

pipe, etc.complete and making good the wall ceiling and floor. (B)

98 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste 120.00 Rmt 245.74 Rs. Two Hundred Forty Five and

pipe with "O" ring of ISI13592/92-2013 (Reaffirmed 2018) or its Paise Seventy Four only

relevant & latest edition &, Pipe fixing for Vertical Drain pipe,

etc.complete and making good the wall ceiling and floor. (A) 75mm

99 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS- 164.00 Rmt 302.54 Rs. Three Hundred Two and Paise

13592 of 90mm Dia Complete with Special flings, Compressor type Fifty Four only

Fittings, Pipe fixing for Vertical Rain water pipe, Including making

good the ceiling and floor on terrace rain water pipe shall be 90 mm

Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end

near by Ground level rate are Inclusive of all Necessary Fittings

100 Providing and fixing concealed or open center point to wall ceiling & 45.00 Rmt 202.97 Rs. Two Hundred Two and Paise

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Ninty Seven only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make

list. [B] 20 mm inner dia.

101 Providing and fixing concealed or open center point to wall ceiling & 55.00 Rmt 247.25 Rs. Two Hundred Forty Seven and

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Paise Twenty Five only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make

list. [C] 25mm inner dia.

Description Total Qty Unit Rate Rate In Word Rs. Amount

102 Providing and fixing concealed or open center point to wall ceiling & 140.00 Rmt 437.66 Rs. Four Hundred Thirty Seven

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation and Paise Sixty Six only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete.rate including Z-patti. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of

GSPHCL make list. [D] 40 mm inner dia.

103 Providing and fixing concealed or open center point to wall ceiling & 25.00 Rmt 647.30 Rs. Six Hundred Forty Seven and

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Paise Thirty only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete.rate including Z-patti. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of

GSPHCL make list. [D] 50 mm inner dia.

104 Providing and fixing concealed or open center point to wall ceiling & 239.00 Rmt 1312.94 RS: One Thousand Three

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Hundred Twelve and Paise Ninty

(NSF) seal for potable water of following dia. nominal bore tube fittings Four only

and clamps including making good the wall, ceiling and floor etc.

complete.rate including Z-patti. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of

GSPHCL make list. [D] 65 mm inner dia.

105 Providing Supplying and Fixing Single Pipe Bracket System with U 165.00 Each 182.83 Rs. One Hundred Eighty Two and

Bolt Rubber mounted for Pipe Supporting Clamping System for Paise Eighty Three only

External Vertical Fixed line with wall distance 3" including nuts, bolts,

fastners etc complete as per detailed Specifications and as directed

by Engineer in Charge.

106 Providing Supplying and Fixing S4 Channel System (S4 Channel + 145.00 Each 421.58 Rs. Four Hundred Twenty One and

Profile Bracket + U Bolt Rubber mounted System) for multiple Pipes Paise Fifty Eight only

for External Vertical Fixed line with wall distance 3" including nuts,

bolts, fastners etc complete as per detailed Specifications and as

directed by Engineer in Charge.

Description Total Qty Unit Rate Rate In Word Rs. Amount

107 Provinding and laying inegrated cement based water proofing 508.00 Smt 929.50 Rs. Nine Hundred Twenty Nine and

treatment of required thickness over the roof including 10mm thick Paise Fifty only

waterproofing cement plaster in cement plaster in cement mortar1:3

and chaina mosaic fitting and finally finishing the surfase with white

cement slurry and slopping out taerrace slabs with following

specification laid to required slope not flatter than 1:80 ( the thickness

of water proofing treatment near rainwater outlet or the lowest point of

the finishedslope shall not be less then 45mm, including treating the

vertical surfaseof the parapet wall up to 20cms . height above finished

level of terracing including finishing the top with joint less water

proofing plaster , curing , testing etc. complete. Rate is including ten

years performance of guarantee bond to be given on stamp paper.

(No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using

kg/sqm. of cement admixed with properly water proofing compound

conforming to IS -2645 and 10 mm thick water proofing cement

plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm

size with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over

10mm thick water proofing cement plaster in cement mortar 1:3 (1

cement ,3 coarse sand) admixed with proprietary water proofing

compound conforming to IS 2645 to required slope and treating

similarly the adjoining walls up to 200mm height incl. rouding of

junction of walls.

C) After Two Days of proper curing applying a second floor of cement

(D) Finishing the surface with china mosaic pieces laid on 10mm thick

joint less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed

with proprietary water proofing compound conforming to IS :2645 and

finally finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and

specified by the Engineer In Charge.

Description Total Qty Unit Rate Rate In Word Rs. Amount

108 Providing , Fabricating and fixing M.S. GRILL/GATE of approved 14450.00 Kg 74.94 Rs. Seventy Four and Paise Ninty

pattern fabricated from M.S. flat,square bars, round bars,c-channel, Four only

square/round box pipe as per detail Drawings. Rate is inclusive of

welding with grinding smooth surface, two coats of Oil paint and one

coat of yellow Zinc primer coat of approved brand only. Oil paint shall

be used as per Approved Material List By G.S.P.H.C the Structural

Steel Shall be used only ISI mark only.

109 S.S. Railing. Providing and Fixing of Stainless Steel 304 grade Pipe 30.00 Rmt 3143.43 RS: Three Thousand One

Railing 0.90mt. Height. Top Round Pipe (Baluster) of 2" dia. Vertical Hundred Forty Three and Paise

balustrade 1.5" x 1.5" at every max. 0.90mt. c/c and intermediate 3 Forty Three only

nos. runners pipe mid rail of 1" dia. and S.S. base plate of 100 x 8mm.

The Railing system shall be floor mounted with anchor fastener and

base plate of 100mm size having 8mm thickness completed as per

detailed drawing & as directed by engineer in charge. Rate are

inclusive of all material, labour, taxes & polishing.

110 Providing and fixing Wash down white vitreious china WALL HUNG 14.00 No 5470.90 RS: Five Thousand Four

(as Per Approved Material List )water closet EUROPEAN TYPE W/C Hundred Seventy and Paise Ninty

PAN of size 555x360x390mm with intergal "P" trap including jointing only

the trap with pan and soil pipe in vitereous china white colour. Rate

inclusive of providing and fixing PVC Flush Tank (as Per Approved

Material List ) Soft seat of the same make. Rate are inclusive of all

necessary fittings required for installation of flushing tank and wall

hung. Wall hung shall be fixed on S.S heavy duty rack bolt having

16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt

111 Providing & Fixing Single Hole Wash Basin with CI or M.S. brackete 10.00 No 3935.33 RS: Three Thousand Nine

& M. I fisher union, P.V.C water pipe with Connection from Stop Cock Hundred Thirty Five and Paise

to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P brassa Thirty Three only

waste coupling etc. Complete. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Wash Basin pillar tap,Angle tap ,Bottel Trap Shall

be as per the Approved Make List of GSPHCL

112 Providing and fixing 600mm x 450mm beveled edge MIRROR of 10.00 No 825.48 Rs. Eight Hundred Twenty Five

superior glass mounted on 6mm thick A.C. sheet or plywood sheet and Paise Forty Eight only

fixed to wooden plugs with C.P. brass screws & washers.

Description Total Qty Unit Rate Rate In Word Rs. Amount

113 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, 10.00 No 909.08 Rs. Nine Hundred Nine and Paise

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Eight only

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Towel Ring Shall be as per the Approved Make List

114 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, 10.00 No 1078.70 RS: One Thousand Ten

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Hundred Seventy Eight and Paise

Specifications and as per the Instruction of Engineer In charge. The Seventy only

Model & Make of Towel Rod Shall be as per the Approved Make List

115 Provinding and fixing S.S hook rail 8 NOs legs hook on S.S. patti 18.00 No 249.84 Rs. Two Hundred Forty Nine and

of 400 X 35 X 3 mm size S.S patti. As Per GSPHCL Make List. Paise Eighty Four only

116 Provinding and fixing gun metal check or non return full way WHEEL / 6.00 No 656.86 Rs. Six Hundred Fifty Six and

HANDLE VALVE 40 mm dia. Rate are inclusive of all matreials, Paise Eighty Six only

Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. All

material used as per approved make list by GSPHCL.

117 Provinding and fixing gun metal check or non return full way WHEEL / 4.00 No 4865.50 RS: Four Thousand Eight

HANDLE VALVE 65 mm dia. Rate are inclusive of all matreials, Hundred Sixty Five and Paise Fifty

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, only

Specifications and as per the Instruction of Engineer In charge. All

material used as per approved make list by GSPHCL.

118 Providing and fixing S W R Nahni trap of the following nominal dia. 22.00 No 541.80 Rs. Five Hundred Forty One and

Self cleaning design with top jali and stainer including cost of cutting Paise Eighty only

and making good the walls and floors 100mm inlet and 50mm

outlet.Including 150 mm x 150 mm stainless steel jali with grating.

119 Providing and fixing S W R MULTI trap of the following nominal dia. 11.00 No 508.28 Rs. Five Hundred Eight and Paise

Self cleaning design with top jali and stainer including cost of cutting Twenty Eight only

and making good the walls and floors 100mm inlet and 50mm

outlet.Including 150 mm x 150 mm stainless steel jali with grating.

120 Providing & Fixing SHOWER WITH ARMS (as Per Approved 10.00 No 931.79 Rs. Nine Hundred Thirty One and

Material List ) ,make with all neccery fitting. Rate are inclusive of all Paise Seventy Nine only

matreials, Labour & Necessary Fittings etc. Complete as per Detailed

Drawings, Specifications and as per the Instruction of Engineer In

charge. The Model & Make of SHOWER WITH ARMS Shall be as per

the Approved Make List of GSPHCL.

Description Total Qty Unit Rate Rate In Word Rs. Amount

121 Providing & fixing Concealed COCK 25 MM DIA Rate are inclusive 28.00 No 1233.57 RS: One Thousand Two

of all matreials, Labour & Necessary Fittings etc. Complete as per Hundred Thirty Three and Paise

Detailed Drawings, Specifications and as per the Instruction of Fifty Seven only

Engineer In charge. The Model & Make of Concealed COCK Shall be

as per the Approved Make List of GSPHCL.

122 Providing and Fixing in Position Cowel Vent to Pipes of 75 mm dia. 8.00 No 16.47 Rs. Sixteen and Paise Forty

123 Providing and Fixing in Position Cowel Vent to Pipes of 110 mm dia. 8.00 No 28.16 Rs. Twenty Eight and Paise

124 Providing and Fixing 3mm thick acrylic sheet with Vinyl letter 4.00 Smt 7193.89 RS: Seven Thousand One

colour-2073- dark grey for back ground and colour-2199-white Hundred Ninty Three and Paise

letter with required screws…etc as per required sizes complete Eighty Nine only

etc as per specification & instruction as per engineer Incharge.

125 Provinding supplying and fixing stainless steel 304 Grade letters as 1120.00 Sq.Inch 118.20 Rs. One Hundred Eighteen and

per detail drawing and instruction of Engineer Incharge Paise Twenty only

126 Providing and Laying G.I.Rain water spout of 50 mm Dia of 2.00 No 100.90 Rs. One Hundred and Paise Ninty

required Length. only

127 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of 14.00 No 565.51 Rs. Five Hundred Sixty Five and

all matreials, Labour & Necessary Fittings etc. Complete as per 6 Paise Fifty One only

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Health Faucets Shall be as

per the Approved Make List of GSPHCL

128 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate 20.00 No 990.61 Rs. Nine Hundred Ninty and Paise

are inclusive of all matreials, Labour & Necessary Fittings etc. Sixty One only

Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Bib Tap Shall

be as per the Approved Make List of GSPHCL.

129 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are 14.00 No 1309.39 RS: One Thousand Three

inclusive of all matreials, Labour & Necessary Fittings etc. Complete Hundred Nine and Paise Thirty

as per Detailed Drawings, Specifications and as per the Instruction of Nine only

Engineer In charge. The Model & Make of Two way Bib Tap Shall be

as per the Approved Make List of GSPHCL.

130 Providing a I.S.I mark 7 levers three keys brass pad lock of Navtal ( 34.00 No 243.64 Rs. Two Hundred Forty Three and

Godrej ) make 65mm dia on completion of project. Paise Sixty Four only

Description Total Qty Unit Rate Rate In Word Rs. Amount

131 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 1355.00 Smt 188.49 Rs. One Hundred Eighty Eight and

Ceilling/Slop Surface (two coats) to give an required shap even Paise Forty Nine only

shade after throughly brushing the surface to remove all dirt and

remains of loose poweder material etc. complete. Rate are inclusive of

applying two coat of lapy (Putty) and one coat of primer on new

Ceilling/Slop Surface to give and even shade including thoroughly

brushing the surface free from mortar dropping andother foreign

matter and sand papered smooth. Fine Putty primers and Plastic

Emulsion Paint Shall Be Used As Per approved Material List By

132 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two 2910.00 Smt 176.01 Rs. One Hundred Seventy Six and

coats) to give an required shap even shade after throughly brushing Paise One only

the surface to remove all dirt and remains of loose poweder material

etc. complete. Rate are inclusive of applying two coat of lapy (Putty)

and one coat of primer on new wall surface to give and even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.primers and

Plastic Emulsion Paint & Putty Shall Be Used As Per approved

Material List By G.S.P.H.C

133 Finishing wall with weather proof exterior emulsion paint on wall 2518.00 Smt 147.68 Rs. One Hundred Forty Seven and

surface (two coats) over and above applying One Coat Of Primer to Paise Sixty Eight only

give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered

materials.etc complete.primers and exterior Emulsion Paint Shall Be

Used As Per approved Material List By G.S.P.H.C

134 Providing and fixing in positon ISI marked Rotational moulded 5000.00 Litre 3.91 Rs. Three and Paise Ninty One

Polyethylene double layer cylindrical vertical storage tank (IS : 12701 ) only

water tank size including making inlet and outlet. Overflow and wash

out arrangement with GI connection including using necessary M.H for

connection etc. Complete with closed cover including applying two

coats of oil pianting outside the tank etc complete.& all materials used

as per approved material List By G.S.P.H.C.L

135 Providing TMT steel (Fe - 500D) reinforcement for R.C.C. work 118510.00 Kg 76.87 Rs. Seventy Six and Paise Eighty

including cutting, bending, binding and placing in position etc. Seven only

Complete for all floor. Brand As approved by the GSPHCL only shall

Description Total Qty Unit Rate Rate In Word Rs. Amount

136 Providing and fixing Urinal of approved quality including 6.00 No 1026.01 RS: One Thousand Ten

connecting the urinal with waste pipe trap and integral Hundred Twenty Six and Paise

longitudinal flush pipe.Rate are inclusive of all matreials, Labour One only

& Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge.

The Model & Make of urinal Shall be as per the Approved Make

List of GSPHCL.

137 supplying j and installation of GRC jali thickness 25mm , grade 45.00 Smt 7379.10 RS: Seven Thousand Three

M-40 ,Flexural M8 , Backside double coated frame fabrication at Hundred Seventy Nine and Paise

site including installation at site, transportation loading , Ten only

unloading all with both sides weather proof emulsion paint etc

complete as directed by EIC

138 Extra for Additional height of propping and centering where the 35.00 Smt 386.48 Rs. Three Hundred Eighty Six and

height of propping and centering exceeds 4.0m beetween Paise Forty Eight only

supporting floor to ceiling including temporery brick or stone

pillars for supporting as required. Height more than 6.0m and

139 Making connection of galvanised Mild steel distribution branch 1.00 Job 878.85 Rs. Eight Hundred Seventy Eight

with galvanised mild steel main 50mm to 80mm nominal bore by and Paise Eighty Five only

providing and fixing tee including cutting and threading the pipes

140 Providing & fixing S.W. gully trap without C.I. grating brick masonary 6.00 No 1176.94 RS: One Thousand One

chamber & water tight C.I. Cover of size 300 mm x 300mm size with Hundred Seventy Six and Paise

standard weight (1) square mouth trap 150mm x 100mm size "P" or Ninty Four only

141 Constructing brick masonry chamber for under ground C.I. 12.00 No 3793.18 RS: Three Thousand Seven

inspection chamber and bends with brick having crushing strength not Hundred Ninty Three and Paise

less than 35 kg./cm2 in C.M. 1.5 R.C.C. top slab with 1:2:4 mix (1 Eighteen only

Cement : 2 coarse sand :4 graded stone aggregate 20mm size) with

mm dia steel at 15 cm,C/C and providing & Fixing R.C.C cover size

cover 0.60x0.45x0.07 met with 40x40x5 mm angle.frame and

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cment walls &

bed connect etc. complete rate inclusive of outside plaster of 15mm

thick in cm 1:3 form top of chamber and all side up to 45 cm deep

below ground level.(A) Inside dimansions 455mmx610mm.and

mm deep for Single or multi purpose pipe line.

Description Total Qty Unit Rate Rate In Word Rs. Amount

142 Extra over above Item No-141 for additional depth 0.10 mt. Or part 36.00 No 239.99 Rs. Two Hundred Thirty Nine and

there of beyond 450 mm depth for brick masonary chamber for 455m Paise Ninty Nine only

143 Constructing brick masonary chamber for underground 15.00 No 5476.93 RS: Five Thousand Four

C.I.Inspection chamber and bends with bricks having crushing Hundred Seventy Six and Paise

strength not less than 35 kg/Cm2 in C.M.1:5 R.C.C. top slab with 1:2:4 Ninty Three only

mix (1-cement:2-coarse sand:4-graded aggregate 20mm size ) with

8mm dia TMT steel at 15 cm c/c both ways and providing and fixing

precast R.C.C.Cover size 0.60 x 0.45 x 0.07m with M.S. angle frame.

of 40 x 40 x 5mm foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.complete rate are also

inclusive of outside plaster 15mm thick in C.M.1:3 from top of

chamber and all side upto 15cm deep below ground level.(i) Inside

dimention 600mm x 850mm and 450mm deep for multy perposed

144 Extra over above Item No-143 for additional depth 0.10 mt. Or part 45.00 No 322.37 Rs. Three Hundred Twenty Two

there of beyond 450 mm depth for brick masonary chamber for and Paise Thirty Seven only

600mm x 850mm size.

145 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of 85.00 Rmt 229.00 Rs. Two Hundred Twenty Nine

Class SN8 Structured Wall polyethelene Piping systems (Pipe with only

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application

as per EN:13476-3 including all local and central taxes, transportation,

freight ...............

.........charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (100mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene

Piping and fittings with the help of coupler ( on line / off line ) attached

with one end of pipes, sliding over the elastomeric sealing rubber ring

placed on the specified valley of the corrugation at........

Description Total Qty Unit Rate Rate In Word Rs. Amount

............ the spigot end, lowering the same into the trench, laying on

the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete

as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc.

as per direction of Engineer-in-charge PipeAs Per approved Material

List By G.S.P.H.C .

146 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of 195.00 Rmt 396.00 Rs. Three Hundred Ninty Six

Class SN8 Structured Wall polyethelene Piping systems (Pipe with only

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application

as per..........

.......... EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (150mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene

Piping and fittings with the help of coupler ( on line / off line ) attached

with one end of pipes, sliding over the elastomeric sealing .........

.........rubber ring placed on the specified valley of the corrugation at

the spigot end, lowering the same into the trench, laying on the lower

bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete

as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc.

as per direction of Engineer-in-charge PipeAs Per approved Material

List By G.S.P.H.C .

147 Providing & fixing Precast RCC cover for IC and MH chambers 3.00 No 1702.00 RS: One Thousand Seven

including MS angle frame of 40x40x5mm and CC 1:1.5:3 precast RCC Hundred Two only

cover including 8mm dia. TMT steel at 15 CM c/c both ways and oil

painting to frame and handle including finishing of concrete with CM

(1:3) etc complete. Rates are inclusive of cost of angle frame, TMT

steel, reinforcement, concrete finishing work and two pieces of MS

flate 25x3mm handle finished dimention of RCC cover shall be 0.60 X

Description Total Qty Unit Rate Rate In Word Rs. Amount

148 Providing and fixing pre-cast concrete kerb stone of gray cement 325.00 Rmt 358.06 Rs. Three Hundred Fifty Eight and

based concrete block 30cm length,30cm height and 15cm thick of M- Paise Six only

250 grade concret as per approved design and including excavation

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etccomplete.

149 Providing and Fixing Precast Rubber Dye Interlocking Concrete 500.00 Smt 680.10 Rs. Six Hundred Eighty and Paise

block 60mm thick with grade of concrete M300 Puumatic compressed Ten only

by Mechanically pressed and as per approved design including 75mm

Sand layer for levelling and filling the joint with Sand in proper line and

level etc. complete.

150 Providing & Fixing cast iron steps of size 500x150mmx22.5mm and 24.00 No 201.74 Rs. Two Hundred One and Paise

painting with two coats of Anti-corrosive paint etc.complete. Seventy Four only

151 Box cutting the road surface to proper slope and camber for making 300.00 Cum 103.17 Rs. One Hundred Three and Paise

a base for road work including removing ther excavated stuff and Seventeen only

disposing as on the road side slope directed upto 50Mt. lead

152 Rolling and Consolidation water bound macadam including watering 2170.00 sqm 20.79 Rs. Twenty and Paise Seventy

not exceeding 150 mm thickness ( Main layers including binding Nine only

materials) including filling in depressions which occurs during the

process ( B) with power roller exceeding 8 tones and not exceeding

153 Providing,Laying and Fixing 25mm thick expansion joint by hydro cell 7.00 Smt 738.13 Rs. Seven Hundred Thirty Eight

semi-rigid UV resistance with high high performance laminated closed and Paise Thirteen only

cell polythene foam joint filler in sheet foam as directed etc. Complete

154 Providing and fixing premoulded compressible filler board in 68.00 Smt 788.78 Rs. Seven Hundred Eighty Eight

black colour confirming to MoRT&H Specifications (Clause 1015), and Paise Seventy Eight only

having minimum density 95kg/cum, non-staining with less than 1%

water absorption & compression recovery of 93% minimum as per

specification for 20 mm wide expansion joint including cutting to

required size and shape at all levels etc.complete as directed.

Description Total Qty Unit Rate Rate In Word Rs. Amount

155 Construction Of Concrete Road Using Trimix System Having of any 194.00 Cum 4565.56 RS: Four Thousand Five

Thickness M-300 Concrete Mix With Providing And Fixirs & Removing Hundred Sixty Five and Paise Fifty

Of "C" Channel Having Size 75Mm. X75Mm As Per Required Level Six only

Slope And Thickness Of Concrete Road Fl Levelling Of Place

Concrete With Surface Vibrator Machine, Dewatering System Device

Finishing With Power Floater Machine And Trowel Light Brooming On

The Surface As Directed With Providing Expansion Joint Size 20 X

190Mm Using Of Concrete Cutter Machine Including Curing Etc.

156 Providing & Making cutting in C.C Road including cleaning etc. 160.00 Rmt. 36.80 Rs. Thirty Six and Paise Eighty

Complete as per direction of Engineer incharge. only

157 providing & Fixing 25mm Dia backup rod of having minimum density 80.00 RMT 20.00 Rs. Twenty only

22KG per Cum(ASTMD-3575) & Compression strength of 0.40 kg per

sqm (ASTM- 5249) and finishing with polysulphide etc. For 25mm

wide Expansion joint.

158 Providingand laying Two level or slopes) and jointing reiforced 60.00 Rmt. 237.83 Rs. Two Hundred Thirty Seven and

concrete light duty, non pressure pipes I.S.Class NP-2 of the following Paise Eighty Three only

diameter with collars and butt ends prepared for collar joints, including

testing of pipes and joints etc. complete. (E) 150 mm. Dia.

159 Supplying of Graded hand Broken stone aggregate for WBM Road of 60.00 cmt 1034.68 RS: One Thousand Ten

size 40mm to 63mm including conveyance charges for any lead and Hundred Thirty Four and Paise

lift. Sixty Eight only

160 Spreading of graded hand broken stone aggregate for Soiling WBM 60.00 cmt 247.28 Rs. Two Hundred Forty Seven and

road of size 40 mm to 63 mm. Paise Twenty Eight only

161 Supplying of Graded hand Broken stone aggregate for WBM Road of 60.00 cmt 991.93 Rs. Nine Hundred Ninty One and

size 25mm to 50mm including conveyance charges for any lead and Paise Ninty Three only

162 Spreading of graded hand broken stone aggregate for Soiling WBM 60.00 cmt 247.28 Rs. Two Hundred Forty Seven and

road of size 25 mm to 50 mm. Paise Twenty Eight only

163 Supplying of murram for binding material on WBM road of including 20.00 cmt 305.80 Rs. Three Hundred Five and Paise

conveyance charges for any lead and lift. Eighty only

164 Spreading blindage or road crust filling the gaps in metal and levelling 20.00 cmt 146.01 Rs. One Hundred Forty Six and

to gradient & Camber as directed.(i) Murrum Paise One only

165 Supplying Granular sub base with Coars Graded Material (table- 150.00 cmt 1386.84 RS: One Thousand Three

400-2) (construction of Granular sub base by Providing coarse Hundred Eighty Six and Paise

graded matrial spreading in uniform layers with molor grader on Eighty Four only

prepared surface mixing by mix in place method with rovator at

OMC and compacting with vibratory roller to desired density

complete for grade material.

Description Total Qty Unit Rate Rate In Word Rs. Amount

166 Providing Pre-Moulded asphalt filler joint as per drawing (A) 377.00 Smt 695.17 Rs. Six Hundred Ninty Five and

12mm Paise Seventeen only

167 providing and corrogulated JSW pre coated sheet roofing fixed 330.00 Smt 1015.76 RS: One Thousand Ten

withh galvanised iron J or L hooks, bolts and Nuts 8 mm dia with Hundred Fifteen and Paise

bitumin and G.I. Limpet washer or G.I. limpet washer with white lead Seventy Six only

complete excluding the cost of Purlines , rafters and trusses(0.60mm

168 Drilling of pilot bore hole in all strata by mud flush DR rig 250 mm 100.00 RMT 749.00 Rs. Seven Hundred Forty Nine

diameter with lowering of pipes, including jointing, only

welding etc. labour of cement slurry, sand and gravel packing and

development of bore with air compressor of required capacity

vertically etc. complete bore shall stand up un-ceased at least

hours complete.

169 Reaming of 250 mm diameter pilot bore including assembling, 100.00 RMT 461.00 Rs. Four Hundred Sixty One

lowering, housing, casing stainer pipes with gravel packing, clay only

packing etc. 550 mm diameter

170 Manufacture, supply and delivery of ISI marked ERW M.S. pipes 100.00 RMT 2407.00 RS: Two Thousand Four

conforming to IS: 4270/2001 with latest amendment Hundred Seven only

Rates are exclusive of GST

171 Steel bent plate suitable to 250 mm diameter ERW pipes 50.00 NO 90.80 Rs. Ninty and Paise Eighty only

etc. size 200 X 150 X 6 mm etc. complete.

172 Supplying of Gravel selected size 4mm to 6 mm size at site of work 5.00 CUM 2029.00 RS: Two Thousand Twenty

etc. complete Nine only

173 Supplying of Portland cement at store or site of work including all 2.00 M.T 6302.00 RS: Six Thousand Three

taxes, loading, unloading, carting insurance etc. complete Hundred Two only

174 Supply of Clamps made from M.S. plate with three holes on either 1.00 Pair 2017.73 RS: Two Thousand Seventeen

sides with bolts and nuts and washers of standard and approved and Paise Seventy Three only

make size 900mm X 100mm X 16 mm flat suitable for 250mm

diameter pipes etc. complete

175 Supply of M.S. Bail plug having length of 0.45 m from medium class 1.00 No. 1054.48 RS: One Thousand Ten

pipe suitable for 250 mm diameter pipes etc. complete. Hundred Fifty Four and Paise

Forty Eight only

176 Supply of Bore Plug having 100 mm height made fromM.S. plate 1.00 No. 1150.12 RS: One Thousand One

with three holes at equal distance on circumferences for nuts, bolts Hundred Fifty and Paise Twelve

type locking arrangements of standard make suitable for 250 mm only

internal diameter pipes etc. complete.

177 Cement Sealing by means of mud pumps without cost of Cement etc. 1.00 Job 13273.00 RS: Thirteen Thousand Two

complete. Hundred Seventy Three only

178 Supply of Clay balls size of 25mm to 35 mm diameter made from 5.00 CUM 751.00 Rs. Seven Hundred Fifty One

sticky clay etc. complete only

Description Total Qty Unit Rate Rate In Word Rs. Amount

179 Development of each water bearing zone coming across up to the 1.00 Job 27777.00 RS: Twenty Seven Thousand

depth of bore well ( tube well ) of by lowering 100 mm diameter drop Seven Hundred Seventy Seven

line and 32 mm diameter G.I. air line for each zone with suitable only

capacity Air Compressor up to availability of sand free discharges

180 Electro logging of bore as directed by the Engineer - in -charge etc. 1.00 Hr 12000.00 RS: Twelve Thousand

181 Charges of Air Compressor capacity of 900CFM 200PSI etc. 1.00 Hr 27330.00 RS: Twenty Seven Thousand

complete for 6.00 hours job etc. complete Three Hundred Thirty only

182 Pumping test of the tube well by 70.00 H.P. submersible pump test 1.00 Job 36607.00 RS: Thirty Six Thousand Six

with D.G. set for 72 hours etc. complete. Hundred Seven only

183 Geophysical survey for pin point for bore well including survey done 1.00 Job 14286.00 RS: Fourteen Thousand Two

by GSSWB department with ralay repail of pin point location including Hundred Eighty Six only

fees to GSSWB department & Transporatation charges..

184 Making connection of galvanised Mild steel distribution branch with 1.00 Job 1500.00 RS: One Thousand Five

galvanised mild steel main 50mm to 80mm nominal bore by providing Hundred only

and fixing tee including cutting and threading the pipes complete.

185 Providing & Laying Lawn for Land Scapping including Watering the 600.00 Smt 150.00 Rs. One Hundred Fifty only

lawns and all labours.

186 Providing & laying & fixing Tree Plant of various plants such as 70.00 No 600.00 Rs. Six Hundred only

plantation rate are also inclusive of Maintaining the plant in give

Condition at the time of Completion including Tree guard etc.

187 Providing, laying, testing and commissioning of 'C' class heavy duty 90.00 Rmt 3606.90 RS: Three Thousand Six

MS pipe confirming to IS 3589/IS 1239 including welding, fittings like Hundred Six and Paise Ninty

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the only

pipes on wall/ceiling with suitable clamps/support frame and painting

with 2 or more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in brick or RCC

walls, slabs/ roofs and making good the damages by bringing to the

original condition to the satisfaction of the Engineer in charge, painting

two coats of approved shade (Post office red) of enamelpaint over a

coat of approved primer. (150 mm pipe)

Description Total Qty Unit Rate Rate In Word Rs. Amount

188 Providing, laying, testing and commissioning of 'C' class heavy duty 130.00 Rmt 2581.50 RS: Two Thousand Five

MS pipe confirming to IS 3589/IS 1239 including welding, fittings like Hundred Eighty One and Paise

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the Fifty only

pipes on wall/ceiling with suitable clamps/support frame and painting

with 2 or more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in brick or RCC

walls, slabs/ roofs and making good the damages by bringing to the

original condition to the satisfaction of the Engineer in charge, painting

two coats of approved shade (Post office red) of enamelpaint over a

coat of approved primer.. (100 mm pipe)

189 Supply and installation,testing and commisioning of Butterfly valves of 3.00 Nos 6101.15 RS: Six Thousand One

PN 1.6 ratings with bronze/gunmetal seat duly ISI marked complete Hundred One and Paise Fifteen

with nuts, bolts, washers, gaskets confirming to IS 13095 of following only

sizes as required: (B) 100 mm dia

190 Providing, installing testing & commissioning of non-return valve of 3.00 Nos 9945.68 RS: Nine Thousand Nine

following sizes confirming to IS 5312 complete with rubber gasket, GI Hundred Forty Five and Paise

bolts, nuts, washers etc. as required. (B) 100 mm dia Sixty Eight only

191 Supplying, fixing single headed internal hydrant valve with 3.00 Set 6139.00 RS: Six Thousand One

instaneousbgun metal/stainless stell coupling of 63mm dia with cast Hundred Thirty Nine only

iron wheel ISI marked confirming to IS 5290 (type A) withy blank gun

metal/ stainless steel cap and chain as required (a)single headed Gun

192 Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A of 3.00 Nos 6886.72 RS: Six Thousand Eight

15 mtr. standard length of approved pattern and size including gun Hundred Eighty Six and Paise

metal male and female Coupling Gun Metal Only Seventy Two only

193 Providing & fixing 63mm dia 15 m long RRL hose pipe with 63mm 3.00 Set 3916.23 RS: Three Thousand Nine

dia male and femal couplings duly bound with GI wires, revates Hundred Sixteen and Paise

etc. confirming to IS 636 (typa-A) as required Twenty Three only

Stainless steel (grade 304)

194 Fire Hose Cabinet (size 600x 450 x 250mm) Providing, Fixing, 3.00 Nos 3453.00 RS: Three Thousand Four

Testing, & Commissioning of weather proof standard fire hose cabinet Hundred Fifty Three only

stand mounting type having single opening with M.S. Fabricate stand,

cabinet make with min 18 gauge MS sheet. Necessary locking

arrangements . Rates are inclusive of all taxes.

Description Total Qty Unit Rate Rate In Word Rs. Amount

195 Supplying and fixing first-aid Hose Reel with MS construction spray 3.00 Nos 7920.84 RS: Seven Thousand Nine

painted in post office red, confirming to IS 884 complete with the Hundred Twenty and Paise Eighty

following as required.25 mm nominal int. dia. Water hose Four only

thermoplastic (Textile reinforced) type-2 as per IS12585 25 mm

nominal internal dia gun metal globe valve and nozzle.

Drum and brackets for fixing the equipment of the wall. Connections

from risers with 32 mm dia stop gun metal valve & MS pipe and

196 Supply, Installation, Testing & commissioning of 25mm dia gun metal 3.00 Nos 608.08 Rs. Six Hundred Eight and Paise

ISI mark Gate Valve with 25mm dia nipple as complete as directed. Eight only

197 Supplying and fixing 4 way Fire Brigade service inlet connection of CI 1.00 Nos 12435.20 RS: Twelve Thousand Four

body with gun metal instantanoeus male inlet coupling complete with Hundred Thirty Five and Paise

chain & cap as required for suitable MS pipe (150 mm) connection Twenty only

conforming to IS 904 as required

198 Design Supply and installation of safety sinages made of Zince 1950.00 Sq.Inch 7.95 Rs. Seven and Paise Ninty Five

sulphied base glow in the Dark Rigid Sheet with high luminiues only

properties inclusing transparent weather proof U/V stabilized plastic

pasted on 2mm, 3mm thick clear acrylic sheet Emergency exit Do not

use Lift in Case of Fire Floor Marking fire lift stair Exit hydrant point fire

extinguisher Fire Alarm, call etc.

199 Getting provisional NOC and Final NOC and Renewal of NOC (During 1.00 Job 16950.00 RS: Sixteen Thousand Nine

Defect Liability Period) for Fire Hydrant,Sprinkler system, Fire Hundred Fifty only

Extinguisher, Fire alarm system etc. from local fire authority or any

other relevant statutory authority at initial stage and required various

other stages of construction work, including preparation of

reports/drawings as per fire authority requirement. Rate also includes

renewal of Fire NOC during defectliability........

............ period as per requirement. Main agency has to give

demonstration of all fire system to fire officer police / concern

beneficiaries & GSPHCL. Agencyhas to submit FDR of approved bank

as per clause 2.0, section 3, of Rs 20000.00 Or Quoted rate which

ever is higher to GSPHCL for minimum maturitperiod of Four yearsin

favour of GSPHC, which will be released after Successful Submitting

of All Fire NOC atthecompletionofdefectliabilityperiod.Renewal Fire

.N.O.C. shall be submitted final S.D.proposal.Agency hasto

bornecharges like...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

........... preparing and submission of allthe

documents,Photographs,CD/DVDrequired togetthe N.O.C. from

concern fire department and also liaisoning work with concern

departments. Main civil agency has to get the pre-NOC from fire &

emergency department well beforestarting civil & the fire hydrant work

including sump & pumproom work. For that professional & experience

fire agency has to prepare drawing of fire hydrant system, sprinkler

system, fire alarm system, DGset etc. as per tender item and making

floor layout of all fire pump panel, cable earthing etc in pump room. If

any changes required...........

............... in drawings of sump & pump room. Main agency has to

inform in written before excavation of pump & sump room. Agency has

to calculate the total head & discharge required as per NBC/local fire

office requirement and as per sitesituation and submit fire pump OEM

specification curve foundation detail etc & get approval of cable, panel

drawings & specification. After completion of fire hydraunt related work

as per pre-NOC, tender specification & drawing approved by fire

department, ...........

.............agency has to do site visit with fire department & give the

testing & demonstration to fire officer & get the final NOC before

handing over of the building. Agency has to give live testing &

demonstration of all system to GSPHCL & police department jointly.

For fire NOC fee separate item is taken in tender. Agency has to

quote the rate as per latest Gazettein respective tender item.

200 Supplying and installation of minimum 46 mm thick Fire rated 30.00 Smt 11740.27 RS: Eleven Thousand Seven

door as per IS 3614:2021 standards made by galvanized steel Hundred Forty and Paise Twenty

conforming to IS 277 Fire door tested at CBR/NABL approved labs for Seven only

maximum rating of 2 hrs tested . Test certificate submitted shall be

with in the validity period of 15 years .The frame and shutter are

finished with powder coating of 60 micron of approved colour with all

necessary fittings ( Fire door make approved by GSPHC)

201 Providing and fixing fire-resistant barrier in duct openings at slab 7.00 Smt 14088.98 RS: Fourteen Thousand

level with fire stop sealant, having minimum 2-hour fire rating, in Eighty Eight and Paise Ninty Eight

compliance with NBC 2016 code. only

202 Providing, fixing, testing and commissioning of 15 mm dia quartzoid 12.00 Nos 503.01 Rs. Five Hundred Three and Paise

bulb type sprinklers of ratings 68 degree centigrade with required One only

Pendent sprinkler

Description Total Qty Unit Rate Rate In Word Rs. Amount

203 Core Cutting using Diamond Core Cutter, up to 200 mm Diameter 3.00 Nos 453.00 Rs. Four Hundred Fifty Three

– Including drilling through RCC/brick masonry walls or slabs, only

complete with all labour, tools, equipment, and disposal of debris

Total Civil Amount

204A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 300.00 Point 605.00 RS: Six Hundred Five only

1.5 sq. mm copper PVC insulted FRLS-H wire with 1.5 sq. mm (green)

copper PVC insulated FRLS-H wire for earth continuity in FIA

approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected on/in Brick Wall / slab along with continuous G.I. fish wire to

draw wires and laid in approved .........

...........manner zari for PVC pipe and boxes shall be filled with cement

mortar and finishing the surface to match the wall / ceiling complete

with approved make 5/6 Amp. ISI mark modular type switch and

accessories mounted in 20 G. G.I. company fabricated metallic box

covered with appropriate front plate modules erected flushed with wall

/ ceiling with necessary modular lamp holder / modular ceiling rose /

HD Connector 75 mm deep GI box as per requirement ( make &

model approved by EIC and matching colour with switches

accessories) as directed for concealed wiring. Light point. Cat.-III.

(Conductor resistance should be as per IS:8130/1984 ) Necessary

sheet cover must be erected on all box to prevent mortar going into

the box.& for ceiling light Point use deep Junction box of same PVC

Pipe make . Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised

before execution by agency .........

............otherwise payment will not be done for extra long point. (For

future extention, if required, agency has to erect one higher size metal

box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box

packing][This item include cleaning(inside/outside) of all GI switch

boards,electric point box,fan box & box cutting plaster arround

modular plate without any gap] (Light Point Cat-III)

204B Secondary Point (Cat-III) 20.00 point 208.00 RS: Two Hundred Eight

204C For Bell Point, Cat.-III 10.00 Point 605.00 RS: Six Hundred Five only

Description Total Qty Unit Rate Rate In Word Rs. Amount

204D For Fan Point (with 6 A. Modular type switch and two module hum free 80.00 Point 842.00 RS: Eight Hundred Forty Two

EME Rotary Five step type electronic fan regulator both having ISI only

204E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having 40.00 Point 636.00 RS: Six Hundred Thirty Six

ISI mark) Cat.-III only

204F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket 90.00 Point 306.00 RS: Three Hundred Six

both having ISI mark ) Cat.-III only

205A Providing and erecting Medium Class FIA approved and ISI mark 1500.00 Mtr. 24.00 RS: Twenty Four only

white colour (embossed) RIGID PVC PIPES of following size

complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia. For 20 mm. dia.

205B For 25 mm. dia. 1500.00 Mtr. 33.00 RS: Thirty Three only

206A Providing & Erecting Mains with approved make FRLS-H PVC 1500.00 Mtr. 81.00 RS: Eighty One only

Insulated wire ISI marked 1.1 KV grade with FIA approved ISI mark

medium class 20/25/32 mm dia. embossed rigid PVC pipe with same

company PVC fitting fixed with adhesive solution to be erected on/in

brick wall / slab along with continuous G. I. fish wire to draw mains

Zari work & plastering by ...........

..........cement mortar & finishing the surface to match the wall / ceiling

complete (Conductor resistance should be as per IS:8130/1984 ) [a]

x 1.5 sq.mm. FRLS-H copper multi stranded conductor mains with

sq.mm. FRLS-H copper multi stranded conductor for earthing as per

standard colour code. (with 20 mm dia. PVC pipe) [Wire must be

having box packing]

206B For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains 800.00 Mtr. 108.00 RS: One Hundred Eight

with 1.5 sq.mm. FRLS-H copper multi stranded conductor for earthing only

as per standard colour code. (with 20/25 mm dia. PVC pipe as per

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

206C For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains 300.00 Mtr. 145.00 RS: One Hundred Forty Five

with 2.5 sq.mm. FRLS-H copper multi stranded conductor for earthing only

as per standard colour code. (with 20/25 mm dia. PVC pipe as per

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

Description Total Qty Unit Rate Rate In Word Rs. Amount

206D For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains 550.00 Mtr. 192.00 RS: One Hundred Ninty Two

with 2.5 sq.mm. FRLS-H copper multi stranded conductor for earthing only

as per standard colour code. (with 25 mm dia. PVC pipe as per

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

207 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated 50.00 Mtr. 37.00 RS: Thirty Seven only

Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts

etc. complete of following sizes.

208 Providing and erecting Plug Point wiring with 1.1 KV grade ISI marked 15.00 Point 930.00 RS: Nine Hundred Thirty

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS-H wire only

with 1.5 sq.mm (green) copper PVC insulated FRLS-H wire for earth

continuity in FIA approved ISI mark white colour medium class

20/25 mm dia. rigid PVC pipe with same band PVC fitting fixed with

adhesive solution erected in brick wall/slab along with continuous G. I.

fish wire to draw wires and make ........

...........plaster zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete with

16 Amp Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp. indicator switch &

No. 6/16 A universal socket white colour suitable for 3 pin top duly

both having ISI mark. (Necessary Sheet Must Be Erected On All Box

To Prevent Mortor Going In To The Box) Cat.-III.

209 Providing and erecting Plug Point wiring with approved ISI marked 1.1 15.00 Point 1087.00 RS: One Thousand Ten

kv grade 2 x 4.00 sq.mm copper PVC insulated FRLS-H wire with 2.5 Hundred Eighty Seven only

sq.mm (green) copper PVC insulated FRLS-H wire for earth continuity

in FIA approved ISI mark white colour medium class 20/25 mm dia.

igid PVC pipe with same band PVC fitting fixed with adhesive solution

erected on/in brick wall /slab along with continuous G.I. fish wire to

draw wires and make .......

Description Total Qty Unit Rate Rate In Word Rs. Amount

.........plaster zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the brick wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted

in 20 G. GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. (a) 16 Amp. indicator

switch & 1 No. 16 Amp. universal socket white colour suitable for 3 pin

top duly. Cat.-III (Necessary Sheet Must Be Erected On All Box To

Prevent Mortor Going In To The Box)(AC/Gyser point)

210A Providing following type of Modular Type Accessories mounted with 5.00 Each 159.00 RS: One Hundred Fifty Nine

20 G company fabricated metalic box, single mounting base frame only

covered with textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge. a) TV Co-

axial Socket outlet. Cat.-III

210B Two pin / RJ-11Telephone Socket (For One Gang) Cat III 30.00 Each 159.00 RS: One Hundred Fifty Nine

210C Blank Plate Single. Cat.-III 500.00 Each 25.00 RS: Twenty Five only

210D Modem Jack for Computer Open RJ-45 Cat III 35.00 Each 159.00 RS: One Hundred Fifty Nine

210E 16Amp. Universal socket. Cat.-III (For AC Points) 6.00 Each 198.00 RS: One Hundred Ninty Eight

210F 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete Cat.-III 6.00 Each 493.00 RS: Four Hundred Ninty Three

210G Modular indicating call bell Cat.-III 10.00 Each 326.00 RS: Three Hundred Twenty

210H Modular Buzzer Cat.-III 10.00 Each 148.00 RS: One Hundred Forty Eight

211 Providing & erecting Switch board for Computer or electric apparatus 30.00 Each 1122.00 RS: One Thousand One

consisting of following items in single board erected on 20 G. G.I. Hundred Twenty Two only

company fabricated metallic box erected with appropriate front plate

modules erected flushed with wall as directed. 1 no. 6/16 Amp.

universal Socket, 1 no. 13 Amp. international socket, 2 nos. 16 Amp.

indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-III

212 Providing & erecting Modular type accessories mounted on 20 G. G.I. 5.00 Each 629.00 RS: Six Hundred Twenty Nine

company Fabricated Galvanised Metal box covered with appropriate only

front plate modules erected flushed with wall / ceiling with 1 nos of

Amp. SP switch & 3 nos. of 6 Amp. 3/5 - pin plug: Cat-III (For TV

Description Total Qty Unit Rate Rate In Word Rs. Amount

213 Providing and Erecting following size of TV Co-axial flexible cable 250.00 Mtr. 39.00 RS: Thirty Nine only

comprising inner conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly – Aluminium film bonded Al.

Braids @ coverage of 65% overall sheated with black PVC insulation

214A Providing & Erecting 2.0 mtr long Earthing system by making 10.00 Each 6000.00 RS: Six Thousand only

minimum bore of 225 mm dia in soft soil. Suitable for pipe-in-pipe

technology earthing.Earth electric rod must be made from Corrosion

free Hot dip galvanizing pipes having following specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B

Class ISI .......

..........mark reputed Brand Terminal Size: 70mm X 100mm length,

Terminal Should be made from inner pipe for that pipe must be

pressed and give rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:-

no.with washer suitable for 14mm dia. hole must be provided at

terminal. total .........

..........minimum Weight(approx.) of earth electrodewith inside

conductive material should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to

retain moisture for long time Back Filling Compound weight is 25 Kg.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail &

sample for approved.........

Description Total Qty Unit Rate Rate In Word Rs. Amount

........... before supplying } Water must be poured in bore before

starting earthing. Earthing value must be measured with earth tester.

Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral &Earthingupto 02 volt. Agency has to maintain

earthing& its value for one year. If required. Earthing must be done in

the presence of A.E.

214B Providing and fixing heavy-duty earthing inspection chamber : heavy 10.00 Each 1025.00 RS: One Thousand Twenty Five

duty PVC/CC/Brick masonary should be size of only

400mmX400mmX400mm depth and Cover should be heavy duty cast

iron with required size of 300mmX300mmX4mm thick.

214C For above earthing additional charges for boring in hard rock soil (by 10.00 Each 325.00 RS: Three Hundred Twenty

breaker) & filling soft soil in earth pit (certificate for soil have to given Five only

by DEE / AE along with photographs)

215 Supplying and erecting 8W led lamps with following wattage capacity 25.00 Each 111.00 RS: One Hundred Eleven

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in only

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with

PC diffuser suitable LAMP holder

216 Supplying and Erecting LED indoor fitting having 1100mm long with 80.00 Each 370.00 RS: Three Hundred Seventy

LED of wattage Mashroom shape 0.2W to 0.5W assemble on single only

MCPCB with housing use as a heat sink shall be made from white

powder coating Aluminum extrusion having enough strength (sample

must be approved ......

............by EIC)with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated ......

Description Total Qty Unit Rate Rate In Word Rs. Amount

........Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing Clamp min.12mm wide heavy duty design & strength

should be sufficient to hold the fitting erected on wall or ceiling

(R) 3 core x 1.0 Sqmm........

......... copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

217 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 100.00 Each 1159.00 RS: One Thousand One

Cool/Natural white/Warm (6K/4K) white Color back lit LED Down Hundred Fifty Nine only

lighter with BIS approved separate potted driver with single piece

pressure die cast aluminium alloy housing (no plastic part allowed)

with corrosion resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED complete

(LED from Philips Lumileds,.......

......... CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT

6K/4K. The LED's should be mounted on back lit metal core PCB for

better heat conduction and long life of LED. Test report of shall be

submitted (LM 79 for complete fixture, for individual LED). The Fixture

have protection like miswiring, over voltage, over load , IP20 wrong

wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver

efficiency > 85%. For 24 W fixture.........

........ wide voltage range from 180 V to 270 V, 50/60 HZ @ 240V,

KV surge protection.

The fixure must have min. 2400 lumen light output. The fixture should

be provided with external separate Potted driver, latest Valid BIS

approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and......

Description Total Qty Unit Rate Rate In Word Rs. Amount

.......... performance. (L70 @ 50,000 Hrs.) The fixture should be able to

easily mount on POP / Grid false ceiling. The Luminiare should be

tested as per IP 20 and following test reports should be submitted at

the time of approval: heat resistant test, thermal test, Ingress

protection test, IK test, Photobiological report with 3 core X

Sq.mm. flexible wire as per site requirement [Note:-The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs.

free replacement Guarantee for complete Fixture

218 SITC of Indoor Commercial Recess / Surface mounted (IP20) 50.00 Each 1027.00 RS: One Thousand Ten

maximum 18 W Cool/Natural white/Warm white Color LED Down Hundred Twenty Seven only

lighter office Lighting Luminaire with separate potted driver with single

piece pressure die cast aluminium alloy housing with corrosion

resistant powder coated finish with PMMA/PS/Injection moulded

Polycarbonate diffuser with high brightness LED complete (LED

approx.6K/4K from Philips Lumileds, .........

..........CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT

5600K (5400 to 5800K bin). The LED's should be mounted on back lit

metal core PCB for better heat conduction and long life of LED. The

Fixture should comply all International Standarad third party (LM 79 for

complete fixture, LM80 for individual LED). The Fixture have

protection like miswiring, over voltage, over load, wrong wiring, THD <

.........lm/w & driver efficiency > 85%. For 18 W fixture wide voltage

range from 180 V to 270 V, 50/60 HZ @ 240V application, 4 KV surge

The fixure must have min. 1800 lumen light output. The fixture should

be provided with external separate Potted driver, latest Valid BIS

approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to ..........

.......easily mount on POP / Grid false ceiling. The Luminiare should be

tested as per IP 20 and following test reports should be submitted at

the time of approval: heat resistant test, thermal test, Ingress

protection test, drop test, Photobiological report with 3 core X

Sq.mm. flexible wire as per site requirement [Note:-The manufacturer /

authorized Channel partner of the manufacturer has to submit 5yrs.

free replacement Guarantee for complete Fixture

Description Total Qty Unit Rate Rate In Word Rs. Amount

219 SITC of Indoor Commercial Recess / Surface mounted (IP20) 45 W 2.00 Each 2071.00 RS: Two Thousand Seventy

Cool/Warm white Color LED Down lighter office Lighting Luminaire One only

with separate potted driver with single piece pressure die cast

aluminium alloy housing with corrosion resistant powder coated finish

with PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete (only from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K

bin). The LED's should be........

........ mounted on back lit metal core PCB for better heat conduction

and long life of LED. The Fixture should comply all International

Standarad third party (LM 79 for complete fixture, LM80 for individual

LED). The Fixture have protection like miswiring, over voltage, over

load, wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 90 lm/w &

driver efficiency > 85%. For 24 W fixture wide voltage range from

V to 270 V, 50/60 HZ @ 240V application, 4 KV surge protection.

The fixure must have min. .........

........4050 lumen light output. The fixture should be provided with

external separate Potted driver, latest Valid BIS approved Luminaire

and driver. The Fixture efficiency ≥ 90 lumens/watt only for safety and

performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily

mount on POP / Grid false ceiling. The Luminiare should be tested as

per IP 20 and following .......

.......test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replacement

Guarantee for complete Fixture

220 Providing and erecting max. 10 watt LED battern having main housing 5.00 Each 309.00 RS: Three Hundred Nine

having powder coated aluminium extruded & mashroom shape only

polycarbonate diffuser. Electrically & photomatry parameters are as

undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system

luments min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤ 15%,

delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70,

Electronic CC driver,.....

Description Total Qty Unit Rate Rate In Word Rs. Amount

.......... 3 core insulated copper wire for internal wiring, IP20, operating

voltage: 160 to 270 V, Surge - 2 KV, Fixing Clamp min.12mm wide

heavy duty design & strength should be sufficient to hold the fitting

erected on wall or ceiling,Length of fitting should be min.600mm,3

core x 0.5 Sqmm copper wire with min. 1ft (300mm) & earthing

221 providing and erecting Polycarbonate body surface mounting LED 10.00 Each 780.00 RS: Seven Hundred Eighty

Bulk head type 9 watt Lighting Fitting with electronic driver having only

THD<15% ,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm

, IP 54 protection ,input voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver having THD > 80lm/w., -20degC to

+60degC working temperature, AL frame with Beam Angle 120deg.

222 supplying & erecting 30 W LED POST TOP LATTERN fitting with 5.00 Each 3444.00 RS: Three Thousand Four

high power white LEDs wattage of 1 ww and above assebled on single Hundred Forty Four only

MCPCB's effiency more than 130 lumens per watt and corrosion free

high pressure diecast alluminium housing with smooth finish powder

caoted and heat sink extruded alluminium with difuser and poly

carbonate optics/ lences ......

.......with compny mark / name /engraved or embossed 120 to 300 volt,

power factor more than 0.95, THD < 10%, CCT 5000K to 5700K

Uniformity ratio > 0.45, Luminure efficency Min 110 lumens per watt.

LED Driver efficency > 85%. Cree/osram/philips Lumileds/Nichia

/Seoul/Bridge Lux (USA) make LED used for luminare ( Each Fitting

required LM 79 and LM-80.........

........ certificates) (B) Flood Light(IP-65)Surge-10KV.(E)Post Top

Latern LED Fitting Comprises of 650 MM TOP diameter 120 degree

beam angle with 3 Nos supporting ribs proposed for garden &

Promenade. maximum 40 WATT, (Note:- The

manufacturer/authorized Channel partner of the manufacturer has to

submit 4yrs free replcement Guarantee for complete Fixture)

223 Supply, Installation, Testing and Commissioning of 1200mm sweep, 80.00 Each 2603.00 RS: Two Thousand Six

BEE 5 Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Hundred Three only

Current (BLDC) permanent ferrite magnet Motor, class of insulation:

B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Power

factor not less than 0.9, ........

Description Total Qty Unit Rate Rate In Word Rs. Amount

...........Service Value (CMM/W) minimum 7.5, Air delivery minimum

220 CMM, Minimum 345 RPM,230v (tolerance as per IS : 374 2019),

THD less than 10%, compitible with electronic regulator unit for Five

Speed Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise ........

.........equal to 75 degree C (Max.), suitable for 140 to 285 Voltage

and rectifier circuit with surge, over current and overload protection

50 Hz, Single phase AC Supply, earthing etc. Complete as

required.Down road: up to 1.0 mtr as per site requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj

Energos 28 & Crompton make & model approved by EIC suject to

above specification )

224 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to 70.00 Each 125.00 RS: One Hundred Twenty Five

the RCC bars up to 50 mm Length each side & piereced through 16 only

Gauge G.I Box having 125 mm dia & depth of 75 mm complete

erected concealed in ceiling with necessary modular type Round plate

225 Supplying and erecting approved make oscillating type bracket fan 2.00 Each 2509.00 RS: Two Thousand Five

A.C. 230 V. 50 cy/s 400/450 mm sweep wall mounted with height Hundred Nine only

adjustment and rotary tilting device complete with guard, flexible Core

plug top complete erected with lead wires as directed. Cat II

226 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe 50.00 Rn. Mtr. 107.00 RS: One Hundred Seven

/M.S. Pipe down rod erected duly painted for fan complete with only

necessary 24/0.2 flat 3 core flexible cable with earthing.The Down

rod thickness,hole,locking arrangement,construction,power

coating,colour shed should be match as ........

........original down rod brought with ceiling fan.For that agency has to

give original down road sample to fabricator and one sample down

rod should be approved with EIC .After approval given by EIC agency

can use the down rod as per approved sample.If without approval

down rod will be erect on site,agency has to replace them with own

cost.(No vibration or wobbling of fan while rotating)

227 Supplying & erecting approved make low noise Decorative exhaust 15.00 Each 1687.00 RS: One Thousand Six

fan having size 250 mm with 1350 RPM with round / square frame Hundred Eighty Seven only

ABS/metalic body with Grill and inbuilt lowers.

Description Total Qty Unit Rate Rate In Word Rs. Amount

228 Supplying & erecting single phase approved make industrial exhaust 2.00 Each 3052.00 RS: Three Thousand Fifty Two

fan suitable for medium duty ring mounted low noise operation only

suitable for medium duty having following dia size and maximum

speed:380 mm dia 1400 RPM

229 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt 10.00 Each 170.00 RS: One Hundred Seventy

complete erected on existing polished wooden block or in M.S. box only

with 3mm thick white ISI mark laminated sheet. (Anchor-Chime

model,Rider,Vision,GM modular)

230 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted 800.00 Sq. Inch 5.94 RS: Five and Paise Ninty

with red oxide be concealed in wall with necessary plastering & Four only

finishing with 3 mm thick laminated sheet with grooving as directed of

following depth 3" depth.

231 Desiging,fabricating,testing electrical panel (switch board) at 6.00 Sq. Mtr. 21500.00 RS: Twenty One Thousand Five

manufacuturer's workshop and Providing & erecting at site. Panel Hundred only

should be weather proof, dust & vermin proof, floor mounted front

operated cubical panel board having IP-54 made from 2 mm. thick

CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick

CRCA M.S. sheet for internal partitions with necessary supporting

angles, flats including .........

.........skirting, bending, drilling, welding, riveting with internal partitions

& cable alley,rubber gromets, rib, control wires, backelite control fuses

as per requirements,sufficient nos. of hinges for doors, door locking

arrangement, rubber gasket complete with Required Nos. heavy Duty

Connector with Cadmium plated nut and bolt for Anti rusting and

Al.busbar for earth, nuts/bolts........

..........,washer etc as per instruction of engineer-In-Charge. Cost of

supplied item like switchgears, LED indicator ,CTs , busbars and PVC

FRLS copper wire with suitable size for power

interconnection,measuring instruments, foundation flange-bolts-base

plates, cost of C channel/angle iron stand (1ft to 2ft height as per

cable size)shall be excluded of panel .........

.............fabrication.Specification of suppiled items is attached

seperatly. The panel shall be supplied with Seven Tank chemical

process. which shall be carried out before applying painting, painted

with powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be .......

Description Total Qty Unit Rate Rate In Word Rs. Amount

...........measured excluding base beams.switchgear of approved brand

and specification shall be used and erected at CPRI approved panel

manufacturers only. Busbar compartment must be separate for easy

termination of tails/cables and to avoid least distance of punching

holes in busbar. Panel depth shall be 350 mm.

Panel manufacturer have to give 5 years service support if in case of

breakdown or fault. Panel manufacturer have to submit electrical

meter calibration report. Agency should design the panel in such a

way that there should not be any excess in panel area (sq.mtr) &

length of bus-bar (mtr), if any excess is need to be done agnecy has to

draw attention to GSPHCL at the time.......

............. of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill

work force under supervision of electrical engineer and guidelines

given by manufacturer to avoid damage to the item.

Size of door and Ele. room / Pump room shall be measure and

provide to panel manufacturer to prepare GA drawing considering the

size of electrical room/pump.......

........ room door and also inside size of it. Agnecy has to co-ordinate

with civil agency for giving proper dimenssion of electrical room/pump

room to accomodeted panel easily.[Including Necessary numbering /

marking on PANEL done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per.......

...........requirement] (See attached details specification of panel &

manufacture also while quoting rate. [Manufacturer must be of

Gujarat state so three stage inspection can be done if required and

service support

232A Supplying and erecting tripple pole & neutral 440V / 500 V Panel 2.00 Rn. mtr. 3171.00 RS: Three Thousand One

mounting Copper Busbars with four equal Nos. of electrolyte bus Hundred Seventy One only

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wraped with colour insulating tape for phase

sequence of following current carrying capacity, erected with

necessary bus bar supports / insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.For

electrolyte copper busbars Suitable for 200 Amp. capacity having

cross section area not less than 150 sq. mm

232B Suitable for 300 Amp. capacity 2.00 Rn. mtr. 4861.00 RS: Four Thousand Eight

Hundred Sixty One only

Description Total Qty Unit Rate Rate In Word Rs. Amount

232C Suitable for 100 Amp. capacity 2.00 Rn. mtr. 1942.00 RS: One Thousand Nine

Hundred Forty Two only

232D Suitable for 630 Amp. capacity 2.00 Rn. mtr. 10455.00 RS: Ten Thousand Four

Hundred Fifty Five only

233A Supplying & erecting approved make Four Pole 415 V change over 1.00 Each 12120.00 RS: Twelve Thousand One

switch interior for panel mounting with operating mechanism A.C.23 Hundred Twenty only

duty confirming to IS [a] For 200 Amp FP . Cat III

233B For 125 Amp FP . Cat III 1.00 Each 7713.00 RS: Seven Thousand Seven

Hundred Thirteen only

234 Providing & erecting approved make ATS panel suitable for following 1.00 Each 55355.00 RS: Fifty Five Thousand Three

size of 3 phase, 415 V., 50 Hz, A.C. diesel generating set complete of Hundred Fifty Five only

scope as detailed below:

1) Power module: Motorised Changeover switch with ATS controller,

Auxiliary contactor with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON, Mains ON, Load and

suitable control terminals and power terminals with neutral earthing

studs. (D) ATS Panel for 50 / 62.5 kVA 3 phase DG Set

235 Providing and erecting Two way Centre off Four pole MCB Change 1.00 Each 928.00 RS: Nine Hundred Twenty

Over Switch (IS 13947-3 / IEC 60947-3) in existing box.(a) for 25 Amp Eight only

236 Providing and erecting Approved make Three pole moulded case 1.00 Each 27477.00 RS: Twenty Seven Thousand

circuit breaker having breaking capacity/strength ICU of 50 K.A. and Four Hundred Seventy Seven

above at 415 V. having Normal current rating 400A.with variable only

Thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing including Neutral Link(Cut

Out)(Main Panel)

237 Providing and erecting Approved make Four pole moulded case 1.00 Each 22813.00 RS: Twenty Two Thousand

circuit breaker having breaking capacity/strength ICU of 35 K.A. and Eight Hundred Thirteen only

above at 415 V. having Normal current rating 250A.with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing (Main Panel)

238 Providing and erecting Approved make Four pole moulded case 3.00 Each 17667.00 RS: Seventeen Thousand Six

circuit breaker having breaking capacity/strength ICU of 35 K.A. and Hundred Sixty Seven only

above at 415 V. having Normal current rating 200A.with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing (Main Panel)

Description Total Qty Unit Rate Rate In Word Rs. Amount

239 Providing & Erecting Approved make Four pole moulded case circuit 2.00 Each 6723.00 RS: Six Thousand Seven

breaker having breaking capacity ICU of 25 K.A. at 415 V,having Hundred Twenty Three only

normal current rating up to 25 A to 100 A. with Variable/Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only. (Spare )(Main

240 Providing & Erecting Approved make Four pole moulded case circuit 2.00 Each 8774.00 RS: Eight Thousand Seven

breaker having breaking capacity ICU of 35 K.A. at 415 V. having Hundred Seventy Four only

normal current rating 125A. with Fixed/Variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections spreader tinned copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only (For Main Panel,Police

241 Providing and erecting following additional parts for panel mounting 9.00 Each 952.00 RS: Nine Hundred Fifty Two

MCCBs (A)Extended operating rotary handle with pad lock with three only

position trip,off,on suitable for 25A to 250 A panel mounting cat-

III(Company must be same company of switchgear)

242 Providing & Erecting Approved make Earth fault Relay suitable to 1.00 Each 5428.00 RS: Five Thousand Four

mount with inter connection to moulded case circuit breaker having Hundred Twenty Eight only

CT ratio & MCCB rating as following along with shunt trip 220 V AC

with all internal connections & complete erected in existing

M.S.housing.(2) 125 A -200 A , CT Ratio 1/200

243 Supply installation Testing and commissioning of MFM (Multi Function 2.00 Each 13984.00 RS: Thirteen Thousand Nine

Meter) dual source meter for the given panel and as per the rating off Hundred Eighty Four only

the panel including RS -485 port and all necessories accessories with

single phasing protection & reverse phase protection module

244 Supplying and erecting approved make set of indicator lamps of LED 6.00 Each 43.00 RS: Forty Three only

type lamp, lense cover, Bakelite holder complete erected with

necessary connections.

245 Providing & erecting L.T. Current Transformer with bar primary 50/5 6.00 Each 272.00 RS: Two Hundred Seventy

to 1000/5 ratio 15 VA burden havong 0.5 class accuracy erected in Two only

existing CRCA box duly secured with insulating materials connected

246 Providing & erecting Approved make. energy meter 3 phase 4 wire 1.00 Each 2586.00 RS: Two Thousand Five

unbalanced load 500 V.50A / 100A complete erected as directed with Hundred Eighty Six only

necessary earth wire. Cat-ii

247 Providing & erecting Suitable set of 3 Nos CTS for 100A and above as 1.00 Each 2085.00 RS: Two Thousand Eighty

required for Energy Meter including testing charges as required by Five only

Electrical Inspector.

Description Total Qty Unit Rate Rate In Word Rs. Amount

248 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 32 15.00 Each 122.00 RS: One Hundred Twenty Two

Amp. suitable to operate on 240 V A.C. system and having breaking only

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. (Main Panel,Police Station Panel,Street light

Terminal Box)(Spare)

249A Providing & erecting 240 V MCB Double pole switch for Motor and 20.00 Each 360.00 RS: Three Hundred Sixty

inductive load (C curve) having 10 KA breaking capacity & confirms to only

IS:8828 in Existing M.S. box having following capacity. For 40 Amp

DP. (Main Panel,Police Station Panel,3-Phase DB & Spares)

249B For 6-32Amp (For Lift Panel ) 5.00 Each 327.00 RS: Three Hundred Twenty

250A Providing & erecting 415 V MCB Four Pole for Motor & Inductive 10.00 Each 803.00 RS: Eight Hundred Three

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 only

in existing box having following capacity [c] 63 Amp. (Main Panel,3-

Phase DB,Police Station Panel) (Spares)

250B For 40A FP MCB(If required) 4.00 Each 728.00 RS: Seven Hundred Twenty

251 Providing & erecting 240 V MCB Double pole switch for Motor and 2.00 Each 599.00 RS: Six Hundred Fifty Nine

inductive load (C curve) having 10 KA breaking capacity & confirms to only

IS:8828 with same company metal box with earthing terminal having

following capacity with necessary Numbering with oil Paint by painter.

For 40 Amp.(If Required)

252 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 2.00 Each 1172.00 RS: One Thousand One

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Hundred Seventy Two only

with same company metal box with earthing terminal having following

capacity with necessary Numbering with oil Paint by painter. [c]

Amp. (If Required)

253A Supplying & fixing box for housing RCCB + MCB combination made of 5.00 Each 299.00 RS: Two Hundred Ninty Nine

18 SWG sheet steel duly powder coated with gasket, dust & vermin only

proof bakelite shield two earthing terminals for following type of

RCCB, RCCB + MCB with necessary numbering / marking with oil

Paint by painter. [a] For 2 pole [Box must be of same company as

MCB, ELCB used]

253B For 4 pole [Box must be of same company as MCB, ELCB used] 5.00 Each 486.00 RS: Four Hundred Eighty Six

Description Total Qty Unit Rate Rate In Word Rs. Amount

254A Providing and erecting Approved make ELCBs / RCCBs conforming 3.00 Each 2434.00 RS: Two Thousand Four

to IS: 12640 and having sensitivity of 30 mA and Short Circuit Hundred Thirty Four only

withstand capacity of 10 KA and suitable for operation on 1 phase and

neutral 240 V having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component

(mounted in Box) for following Max. rating erected as directed with

same company metal box with earthing terminal.Suitable for operation

on Single phase 240 Volt max. rating of (i) For 40 Amp. DP Cat.-III. (If

254B For 25 DP ELCB Amp. (For Lift Panel) 1.00 Each 2145.00 RS: Two Thousand One

Hundred Forty Five only

255 Providing and erecting Approved make ELCBs / RCCBs conforming 2.00 Each 2872.00 RS: Two Thousand Eight

to IS: 12640 and having sensitivity of 30 mA and Short Circuit Hundred Seventy Two only

withstand capacity of 10 KA and suitable for operation on 3 phase and

neutral 415 V having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component

(mounted in Box) for following Max. rating erected as directed

.Suitable for operation on Three phase 440 Volt max. rating of (iii) For

40A FP (For Lift Panel)(3-Phase DB)

256 Providing ad erecting approved make single phase Double Door metal 9.00 Each 6253.00 RS: Six Thousand Two

clad D.B. as per relevant indian standards ammended upto date. Hundred Fifty Three only

Supplying and fixing following way single phase MCB distrubution

board of company fabricated with sheet box with powder coated

inside and outside after apply seven tank chemical process of 1.2mm

thick CRCA sheet cover (Door, Back side & body of MCBDB)

complete with suitable integral single ........

..........piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for

mounting MCBDB.Manufacturer must be provided (1) IP 43 and as

per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make

neutral & Earthing link with isolation ......

Description Total Qty Unit Rate Rate In Word Rs. Amount

..........& Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC insulated copper conductor up

to terminal blocks and internal connection, tinned coppper bus bar,

no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including

Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve

confirms to IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable.......

........... to operate on 240 Volt A.C. power. (6 to 25 Amp 12 Nos.) (The

DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP)

should be used as same as MCBDB) [Including Necessary numbering

/ marking on box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement] Single phase incoming and

horizontal single phase outgoing.

257 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Each 1664.00 RS: One Thousand Six

board - flush / surface mounted fitted with busbar, neutral link, earth Hundred Sixty Four only

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) ......

..........suitable for (A) single phase incoming and horizontal single

phase outgoing sheet steel double door (IP-43)

For Single phase incoming and horizontal single phase outgoing -(a)

Double door-16 Way

(The DBs should be used of same company of MCB / ELCB to be

used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box ......

Description Total Qty Unit Rate Rate In Word Rs. Amount

...........cutting plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

258 Supply, Installation, Testing & Commissioning of Three Phase, 440 V 2.00 Each 6319.00 RS: Six Thousand Three

Surge Suppressor protection Device (SPD) & 40 Amp. TPN MCB (or Hundred Ninteen only

as per SPD OEM guideline for the protection of SPD which is erected

such a way that it can be operated easily) SPD Must be Capable to

Protect all electrical and electronic equipments. The Detail

Specification are As per Attached sheet with Annexture -A (Hakel,

Iskira,OBO make) (With Three year Gaurantee / Warranty)

259 Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) 1.00 Each 103213.00 RS: One lac Three Thousand

as per following requirement: (1) Input Voltage Range - Three Phase Two Hundred Thirteen only

340 To 480 Volt AC. (2) Out put Volatge - Three Phase 415 Volt AC

(Line - Line) with Voltage Regulation of +/- 1%. (3) Frequency range -

47 Hz To 63 Hz. (4) Efficiency - More or equal to 98%. (5) Type of

Stabilizer - Suitable for Balance & Unbalance Load and Voltage

including SPD (6) Controlled Type - Digital Micro ........

..........Controller Based Disply. (7) Rate Of Correction - Upto 100 Volt /

Sec (Line - Line) (8) Servo Motor Drive - AC Syncronous Stepper

Motor - As per KVA Capacityy, Out put volatge and Voltage regulation

requirement. (9) Nil Wave form Distortion and Effect of Load POwer.

(10) Responce Time - 10 milli second. (11) Protection requirements -

Input low Cut off protection / Input High Cut Off Protection / Output

Low Cut Off protection / IOutput High .......

............ (12) Fault Annuciation Panel LED shows Input present, Input

high Input low, Output Normal, Output High, Outpur low, Overload.

(13) Output On time delay - 10 seconds (14) Ambient Tempeature

capacity - 0 - 45 RH upto 90 %. (15) Enclosure Type - IP 20 (16) Type

of Cooling - Oil ,Output:Bypass switch with changeover switch and

Provied SPD & 5 year free replacement guarantee on Stamp paper.

Loading and unloading of above item shall be done by hydra and skill

work force under supervision .........

Description Total Qty Unit Rate Rate In Word Rs. Amount

.........of electrical engineer and guidelines given by manufacturer to

avoid damage to the item. Picture of it to be submitted in running bill /

final bill.Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in size

discuss with GSPHCL engineer for rectification before giving order.

(50 KVA) (Fuji Electric, Servomax Limited, Krykard, Make)

260 Supplying & erecting 12 mm thick backelite sheet of approved make 2.00 Sq. Mtr. 2289.00 RS: Two Thousand Two

and grade on 25 x 25 x 3 mm red oxide painted angle iron frame Hundred Eighty Nine only

suitable for fixing ICDP SWITCH and energy meter (contractor shall

make approved drawing of Bakelite sheet To arrange required No. of

Energy meter & ICDP switch -busbar etc. as per Actual space

available in electrical room at site)

261 Providing and erecting metallic vitrified danger notice board as per 5.00 Each 69.00 RS: Sixty Nine only

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

262A Supplying and laying UPVC cable trunking system comprising 20.00 Mtr. 275.00 RS: Two Hundred Seventy

unplasticised polyvinyl, chloride rigid material with ignition free & flame Five only

proof confirming BS with necessary end caps Internal and external

bend, flat bends, coupler, tee etc. All necessary accessories and

measuring of following sizes. [1] 75 mm x 50 mm trunking (MK /

Legrand/OBO Make Only)

262B 100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 20.00 Mtr. 424.00 RS: Four Hundred Twenty

263A Supplying and erecting approved make GRP/FRP Perforated type 50.00 Rmt 636.00 RS: Six Hundred Thirty Six

Cable Tray Material – Corrosion Resistant Polyester Flame Retardant only

U.V. Stabilized Resin System - Manufactured from Pultruded Sections-

Polyester Resin System, Glass Content : 55 – 60 % - - Standard

Length : 3000 mm- Support Span – 1500 mm, Deflection L/200 -

Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS

6746 - Appendix K/UL 94, Very .....

..........Low Flammability - Specification Followed NEMA FG1

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread

(Extent of Burning) – 20 mm as per Standard ASTM D 635 - Tensile

Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 -

Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D

790- Izod Impact ......

Description Total Qty Unit Rate Rate In Word Rs. Amount

........Strength – 130 Kg/Cm2 as per Standard ASTM D 256-

Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM

D 695- Barcol Hardness – 50 – 65. For Width - 300 mm, Pultruded “C”

Channel with 50 mm Sides 4 mm Thickness, Loading 30 Kg./Mtr.

263B For Width - 150 mm, Pultruded “C” Channel with 30mm Sides 3 mm 50.00 Rmt 493.00 RS: Four Hundred Ninty Three

Thickness, Loading 15 Kg./Mtr. only

264 Providing and fixing approved make Ladder type cable tray. Made 50.00 Rmt 306.00 RS: Three Hundred Six

from M.S sheet. The cable tray should be bended as per IS 2062/1079 only

shall be fabricated of double bended channel section longitudinal

members with single bended Channel section. Rungs of members

welded to the base of the longitudinal ........

........members at 250 mm c/c spacing . as per IS and shall be coated

with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per instruction of

engineer in charge..(3) 300 X 50 X 2.0 mm Thick

265 SITC of specified make Cat - 6 voice /data cable to be done in 2000.00 Mtr. 47.00 RS: Forty Seven only

prelaid PVC pipe / raceway , but without the cost of raceway or pipe (

the wire is to be drawn from MFD/ JB to outlet point) (a) CAT - 6-Y

Colour ( For Voice Cabling ) & X -Colour(For Computer Data Cable ) .

( Molex/Avaya/Systimax/Legrand make)

266 SITC of 24 x 10/100/1000BASE-T ports 2.00 Each 15247.00 RS: Fifteen Thousand Two

4 x Gigabit RJ45/SFP Combo ports Hundred Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user

Molex/Avaya/Systimax/Legrand make)

267 SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB 2.00 Each 4357.00 RS: Four Thousand Three

based IO Jacks (RJ45, TIA-568C Category-6, Installation and Hundred Fifty Seven only

Termination of all 24 nos. Catergory-6 UTP , unloaded with

individually replaceable 24 nos. Category-6 I/O Jacks complying with

TIA-568.C.2, as per given jack specification Shall be suitable for

loading unshielded & shielded jacks for different category systems (

Molex/Avaya/Systimax/Legrand make)

268 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag 35.00 Each 199.00 RS: One Hundred Ninty Nine

less(Molex/Avaya/Systimax/Legrand make) only

269 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag 35.00 Each 155.00 RS: One Hundred Fifty Five

lessMolex/Avaya/Systimax/Legrand make) only

Description Total Qty Unit Rate Rate In Word Rs. Amount

270 Supply and installation of 9U steel rack for installing 4 nos. Ethernate 2.00 Each 11441.00 RS: Eleven Thousand Four

switches/Hubs. The Rack should be fully enclosed steel housing Hundred Forty One only

fabricated with 14 SWG sheet and powder coated with glass doors

and having wire management systems. The rate includes the Exhaust

Fan, 2 nos. 4 socket and 1 switch power strip and all the wiring in the

rack. (Rittal,Valrack,APC,Legrand make)

271A Supplying & erecting Delton or approved make Telephone Cable 50.00 Mtr 124.00 RS: One Hundred Twenty

electrolytic copper conductor PE insulation twisted in two pairs, & Four only

wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR

outer Jacket suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors & nos.of pairs.

With necessary connections.(a) Conductor Size 0.5 mm armoured

Ten Pairs.[make and model approved by EIC strictly as per tender

271B For Conductor Size 0.5 mm armoured Twenty Pairs.[make and model 50.00 Mtr 198.00 RS: One Hundred Ninty Eight

approved by EIC strictly as per tender specification] only

272A Providing & erecting Tag Box for Telephone Lines suitable for 20 1.00 Each 1355.00 RS: One Thousand Three

Pairs Krone type complete with Krone & locking arrangements. Hundred Fifty Five only

272B Providing & erecting Tag Box for Telephone Lines suitable for 50 1.00 Each 1730.00 RS: One Thousand Seven

Pairs Krone type complete with Krone & locking arrangements. Hundred Thirty only

273 SITC LED Bollard fittings of minimum height 600 mm & dia.100mm 4.00 Each 2661.00 RS: Two Thousand Six

having polycarbonate clear/milky diffuser mounted on 3mm thick Hundred Sixty One only

aluminium finished powder coated pipe with base plate 160x160mm

with erection by M8x75mm fastner with required RCC foundation.IP65

for 9-20 watt, surge- 4 kv-

274A Supplying and erecting approved make Octagonal pole made from HR 5.00 Each 8792.00 RS: Eight Thousand Seven

sheet steel. The pole should be made as per IS. and shall be coated Hundred Ninty Two only

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box with Hot Deep Galvanised

door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard.........

Description Total Qty Unit Rate Rate In Word Rs. Amount

......... profile 35mmX7.5mm Din-Rail & MCB , Brass stud type terminal

and arrangement for cable termination to be erected on RCC

foundation as per details given by manufacturer and EIC considering

site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel

rainforcement of RCC FE 415, 3) Clear cover to rainforcement 50mm,

4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep galvanized

average 70Micron, 7) Detail .......

............drawing will be given by corporation. For 6 Mtr. Long 70 mm

Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long hot

deep galvanized J-Bolt, nuts, washers with 1000mm under ground

and 200mm above ground level and 450mm dia. Foundation in 1:2:4

proportion.(As Per Details given by Manufacturer & EIC Considering

Site Requirement.Approx.Pole Weight 59kg.) (Make:- Bajaj, Walmart,

Ambica, Transril)

274B For 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness 1.00 Each 10843.00 RS: Ten Thousand Eight

with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm Hundred Forty Three only

long hot deep galvanized J-Bolt, nuts, washers with 1000mm under

ground and 200mm above ground level and 450mm dia. Foundation

in 1:2:4 proportion.(As Per Details given by Manufacturer & EIC

Considering Site Requirement.Approx.Pole Weight 67kg.) (Make:-

Bajaj, Walmart, Ambica, Transril)

275A Supplying & erecting Sintex or approved make SMC press moulded 2.00 Each 890.00 RS: Eight Hundred Ninty

composite FRP. loop-in, loop-out approx. 2mm thick box complete only

with bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of following size of

box.a) 300mm x 200mm x 100mm [deep] (For TV Cable)

275B For 140mm x 140mm x 100mm [deep] 2.00 Each 295.00 RS: Two Hundred Ninty Five

275C For 250mm x 200mm x 100mm [deep] 2.00 Each 510.00 RS: Five Hundred Ten

Description Total Qty Unit Rate Rate In Word Rs. Amount

276 Supplying and erecting Coil type earthing, coil made from 8 SWG 6.00 Each 369.00 RS: Three Hundred Sixty Nine

galvanised iron wire with 50 mm OD and 50 turns (length of turns only

approx. 200 mm) and having additional continuous streight length of

3.00 mtr at open end and should be connected to earthing bolt and

burried in 1.5 mtr deep specially prepared earth pit complete with salt

and charcoal/coke as required for coil type earthing. (Approx weight of

coil 1.0 to 1.1 Kgs)

277 Supplying and erecting Fabricating terminal box for street light pole 11.00 Each 702.00 RS: Seven Hundred Two

made from 16 SWG M.S. sheet having following size complete with only

fixing arrangement for terminal board, with necessary hole for wire

entry and exit from the box. The box shall be provided with cover and

hinges on one side and bolting at......

............ other end The box shall be fixed by clamps fabricated from

25mm x 6mm flat.The box shall be painted with one coat of red oxide

and two coats of paint having following box size 330 mm x 260 mm x

140 mm (depth). And Providing and fixing Terminal board of size 5.0 x

127 x 152.4 mm. bakelite sheet with 15 Amp. kitkat pattern porcelain

fuse unit with suitable brass studs with nuts, washers and clamps of

size 25 mm x 3 mm suitable for pole painted with one coat of red lead

278 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 8.00 Each 487.00 RS: Four Hundred Eighty

4.2 cm outside diameter complete with suitable G.I. Sleeve tubing of 2 Seven only

mm. thick and required size and length suitable for 76.5 / 80 mm.

required size of pole top or pipe in pipe surface for terrace as per

instruction of EIC or wall bracket as per instruction of EIC having nuts

and bolts for fixing the brackets and having spread of Upto 0.70 mtr.

length with suitable.......

............ degree angle as per site situation suggested by EIC.Vertical

plane and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of

alluminium paint( Zinc coating before alluminium paint in

mandatory)with with 150X150X2mm thick G.I plate with 4 nos heavy

duty galvanized anker fastner of required size or Single arm bracket

(pipe in pipe type )suitable for terrace as per design given by EIC For

single arm bracket. (Fabricators: Bajaj, Valmont, Transrail, Ambica,

RR Ispat Only) (Test certificate to be submitted)(For wll bracket)

Description Total Qty Unit Rate Rate In Word Rs. Amount

279A Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 3.00 Each 487.00 RS: Four Hundred Eighty

4.2 cm outside diameter complete with suitable G.I. Sleeve tubing of 2 Seven only

mm. thick and required size and length suitable for 76.5 / 80 mm.

required size of pole top or pipe in pipe surface for terrace as per

instruction of EIC or wall bracket as per instruction of EIC having nuts

and bolts for fixing the brackets and having spread of Upto 0.50 mtr.

length with suitable rise.......

.......... as per site condition and suitable welded stiffner reducer and

nipple with check nut complete painted with one coat of yellow zinc

and two coats of alluminium paint for Single arm bracket suitable for

pole or terrace as per design given by EIC. For single arm bracket.

(Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj,

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be

279B For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make 1.00 Each 616.00 RS: Six Hundred Sixteen

Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) only

(Test certificate to be submitted)

280 Providing and Fixing SITC of Outdoor aesthetically designed LED 5.00 Each 4406.00 RS: Four Thousand Four

Street Light Luminaire with total consumption of 48 - 59 Watts with Hundred Six only

single piece die cast aluminium housing, High power White LEDs

wattage of 5 Watt & Above shall be mounted on high quality metal

core PCB with extremely precison designed heat sink complete with

IP66 protection Class with polycarbonate / thoughened glass cover /

cluster Lens the fixture should ........

.........be suitable for pole/bracket mounting. The fixture to comply both

LM79 and LM 80 guidelines with LED module L70 at 50,000 hrs,

provided with high quality polycarbonate lenses /cluster Lens for better

light distribution. The Fixture Should be able to be Pole Mounted and

also bracket mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10% and

P.F > 0.95. Also the Fixture ......

Description Total Qty Unit Rate Rate In Word Rs. Amount

........should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 150 lm/w, and total lumens

not less then 7500 CCT > 5000K, CRI > 65, beam angle 120 deg,

surge immunity level at least 4 KV integral and 10 KV non integral The

Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the

fault is removed. In addition .........

..............to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

(Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee for

complete Fixture)

281 SITC of Outdoor aesthetically designed LED Street Light Luminaire 9.00 Each 5229.00 RS: Five Thousand Two

with total consumption of 60 - 89 watts with single piece die cast Hundred Twenty Nine only

aluminium housing, High power White LEDs wattage of 5 Watt &

Above LED's mounted on high quality metal core based PCB with

extremely precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / Toughened glass cover/cluster Lens. The

fixture should be suitable.......

........... for pole/bracket mounting. The fixture to comply both LM79

and LM 80 guidelines with L70 at 50,000 hrs, provided with high

quality polycarbonate Seperate lenses for better light distribution.

Capacity of Each LED Must Be>4Watt in Street Light Fitting. The

Fixture Should be able to be Pole Mounted and also bracket mounted,

provided with high quality potted driver for protection against, high and

low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias........

........... Operating range Voltage 160 to 270V, system efficiency >=

150 lm/w,total lumens not less then 10500, CCT > 5000K, CRI >65,

beam angle 120 deg, 4kV integral & non integral surge immunity level

at least 10 KV non integral. The Separate Potted driver should have

over current, over voltage protection, short circuit protection so that

the fixture recovers once the ........

........fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

Description Total Qty Unit Rate Rate In Word Rs. Amount

282 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 8.00 Each 7315.00 RS: Six Thousand Three

with total consumption of Max. 120 W with single piece die cast Hundred Sixteen only

aluminium housing, high power LED shall be mounted on high quality

metal core PCB with extremely precison designed heat sink,

complete with IP66 protection Class, with polycarbonate / toughened

glass cover. The fixture should be suitable for pole/bracket mounting.

The fixture to comply both LM79 and LM 80 .........

........guidelines with LED minimum 130 lumen/watt with toughen

glass, L70 at 50,000 hrs, provided with high quality polycarbonate

lenses for better light distribution. The Fixture Should be able to be

Pole Mounted and also bracket mounted, provided with high quality

driver for protection against high and low Voltage cut Off, opertional

for high amibient and high humid envirnoments, THD of driver should

be less than 10% and P.F. greater than 0.95. Also the Fixture should

meet the following technical criterias.......

......... Voltage 160 to 270 V, system efficiency greater thanequal to

120 lm/w and total lumens not less than 14400, operating current less

thanequal to700MA, CCT greater than 5000K, CRI greater than65,

beam angle 120 deg, surge immunity level 4 kv integral & 10 kv non

integral The Separate Potted .......

.........driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed.

In addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Stricly sample approved by EIC subject to tender

specification) (Note: The manufacturer.....

.........../authorized Channel partner of the manufacturer has to submit

5 yrs free replcement Guarantee for complete Fixture)(Cool White

Color/warm white/natural white ( model approved by engineer

incharge subject to above specification )

Description Total Qty Unit Rate Rate In Word Rs. Amount

283 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 3.00 Each 5229.00 RS: Five Thousand Three

with total consumption of Max. 90 W with single piece die cast Hundred Twenty Four only

aluminium housing, high power LED shall be mounted on high quality

metal core PCB with extremely precison designed heat sink,

complete with IP66 protection Class, with polycarbonate / toughened

glass cover. The fixture should be suitable for pole/bracket mounting.

The fixture to comply both LM79 and LM 80 .........

..........guidelines with LED minimum 130 lumen/watt with toughen

glass, L70 at 50,000 hrs, provided with high quality polycarbonate

lenses for better light distribution. The Fixture Should be able to be

Pole Mounted and also bracket mounted, provided with high quality

driver for protection against high and low Voltage cut Off, opertional

for high amibient and high humid envirnoments, THD of driver should

be less than 10% and P.F. greater ........

..........than 0.95. Also the Fixture should meet the following technical

criterias. Voltage 160 to 270 V, system efficiency greater thanequal to

120 lm/w and total lumens not less than 14400, operating current less

thanequal to700MA, CCT greater than 5000K, CRI greater than65,

beam angle 120 deg, surge immunity level 4 kv integral & 10 kv non

integral The Separate Potted ....

..........driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed.

In addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Stricly sample approved by EIC subject to tender

specification) (Note: The manufacturer.......

........../authorized Channel partner of the manufacturer has to submit

yrs free replcement Guarantee for complete Fixture)(Cool White

Color/warm white/natural white ( model approved by engineer

incharge subject to above specification )

284 Providing & Erecting Univesal Astro interlligent Street light Control 1.00 Each 18406.00 RS: Eighteen Thousand Four

System insu with weather proof box for indoor allplication 5KVA ( as Hundred Six only

Per atteched Specification)

Description Total Qty Unit Rate Rate In Word Rs. Amount

285 Providing , erecting , testing and commissioning Insu Intelligent 1.00 Each 24984.00 RS: Twenty Four Thousand

Streetlight Controller specially design for energy saving in Nine Hundred Eighty Four only

conventional streetlight system ( Cat. No. SLC 03 1Ph 15KVA

20Amp/Cat NoSLC 03 1 ph 15 KVA 20 amp per phase) having

technial specification ,1 phase 2 wire, 230 V AC/ph +/ 25% R Y B N

2 Wire supply System.50 Hz (+ / 10 %), 2 W (Stand By) to 4 W (at

street light operation) consuption , Advance 8 bit micro .........

........controller, switching on longitude and latitude base, accaracy of +

1 minute per month. with inbuilt battery, with battery life of more than

years, with speicial device which hold the parameter for more then

years without any power and password protected. 16 character and

two line LCD display with backlight, 4 keys user friendly keyboard

system, 7500 VA feeder pillar capacity, .........

........63/100 amps isolator ,3 Outpus with termination 40/63 Amps 2/3

pole contactor , 3X16 Amps with F R cable provision to by pass by

way of relay operation through auto/manual switch, 2 to 55 centigrade

and humidity 90 % non condensing Outdoor type installation on pole

with clamps.(Provided with clamps ........

......and nut bolt) or wall or floor, three locking system flush type

internal panel lock, external pad lock and internal U clamp locking

systems for against theft of panel. having 17/25 Kg weight ,16/18

guage MS weather proof with industrial exterior powder coated with

tank process RAL

286A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 93.00 Mtr 642.00 RS: Six Hundred Forty Two

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under only

ground or to be laid on wall with suitable G.I. heavy guage 1.0mm

thick cable clamp or in existing DWC pipe underground or road

crossing or floor.(a) For 3*1/2 core120 Sq. mm (70 Sq. mm * 1/2

core)(Cut off Switch to Sump room Main Panel )

286B Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 140.00 Mtr. 338.00 RS: Three Hundred Thirty

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under Eight only

ground or to be laid on wall with suitable G.I. heavy guage 1.0mm

thick cable clamp or in existing DWC pipe underground or road

crossing or floor.(a) For 3*1/2 core 50 Sq. mm (25 Sq. mm * 1/2

core)(Main Panel to Police Station Panel CO Switch and DG Set to

286C For 3*1/2 core 70 Sq. mm (35 Sq. mm * 1/2 core) If Rewqured 60.00 Mtr. 450.00 RS: Four Hundred Fifty

Description Total Qty Unit Rate Rate In Word Rs. Amount

286D For 4 core x 25 Sq. mm ( Police Station Main Panel to Lift Panel and 143.00 Mtr. 227.00 RS: Two Hundred Twenty

Main panel Sump room to Fire Panel ) Seven only

287 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 380.00 Mtr. 451.00 RS: Four Hundred Fifty One

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be only

laid on wall with suitable G.I. heavy guage 1.6mm thick cable clamp or

in existing DWC pipe underground or road crossing or floor. (a) For

4 core x 4 sq.mm.

288A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte 50.00 Mtr. 70.00 RS: Seventy only

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. For One wire 6.00 Sq.mm

288B [f] One wire 10.00 sq. mm 50.00 Mtr 114.00 RS: One Hundred Fourteen

288C For One wire 16.00 Sq.mm 150.00 Mtr. 176.00 RS: One Hundred Seventy Six

288D For One Wire 25.00 Sq.mm 20.00 Mtr. 293.00 RS: Two Hundred Ninty Three

288E For One Wire 35.00 Sq.mm 20.00 Mtr. 373.00 RS: Three Hundred Seventy

288F For One wire 70.00 Sq.mm 100.00 Mtr. 829.00 RS: Eight Hundred Twenty

289A Providing & fixing Solderless crimping type Aluminium lugs 19.00 Each 15.00 RS: Fifteen only

conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] For

289B For 35/50 Sq.mm 28.00 Each 20.00 RS: Twenty only

289C For 70 Sq mm 29.00 Each 25.00 RS: Twenty Five only

289D For 120 Sq mm 20.00 Each 45.00 RS: Forty Five only

290 Providing & fixing Solderless crimping type Copper lugs conforming to 307.00 Each 8.00 RS: Eight only

IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

291A Providing & fixing double compressed heavy duty flange type brass 30.00 Each 43.00 RS: Forty Three only

cable gland with rubber ring for P V C insulated armoured cable

complete with outgoing tails, insulating tape etc. For following size

cables. (a)For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make

291B For 3*1/2 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 66.00 RS: Sixty Six only

Description Total Qty Unit Rate Rate In Word Rs. Amount

291C For 2 to 4 core x 70.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 102.00 RS: One Hundred Two

291D For 2 to 4 core x 50.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 75.00 RS: Seventy Five only

291E For 2 to 4 core x120 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 139.00 RS: One Hundred Thirty Nine

292 Supplying following size of Light duty “A” Class G.I. Pipe & erecting 10.00 Mtr. 171.00 RS: One Hundred Seventy

as directed by Engineer-in-charge. For 25 mm dia. One only

293A Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 80.00 m 58.00 RS: Fifty Eight only

kv grade ISI marked copper wires of following size to be erected as

directed. 3 core 1.5 sq.mm. PVC insulated round copper wire ISI

293B For 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark. 150.00 Mtr. 96.00 RS: Ninty Six only

294 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. 10.00 Mtr. 261.00 RS: Two Hundred Sixty One

below ground across the road crossing or on floor with necessary only

material in an approved manner and making the ground as per

original.(C) For 150mm Dia

295A Providing & laying HDPE Double walled corrugated pipes (DWC) 250.00 Mtr. 117.00 RS: One Hundred Seventeen

(conforming to IS: 16205 (part 24) 2018)) with minimum load required only

of 450N capacity with anti rodent and ultra violet material properties

with necessary connecting accessories of same material at required

depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to

make ground as per original. For Outer dia. 50 mm and Inner dia.

mm. ) (Test Certificate to be Submitted)

295B For Outer dia.90mm and Inner dia. 75mm(Test Certificate to be 100.00 Mtr. 150.00 RS: One Hundred Fifty

Submitted) only

295C For Outer dia.120mm and Inner dia. 103.50mm (Test Certificate to be 60.00 Mtr. 191.00 RS: One Hundred Ninty One

Submitted) only

296 Providing & erecting open well horizontal mono block pump set with 2.00 Each 17108.00 RS: Seventeen Thousand One

cast iron body, complete for three phase submersible motor having Hundred Eight only

[C] For 3 HP 3 phase open well horizontal mono block pump set

suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for

50/65 mm dia delivery pipe

Description Total Qty Unit Rate Rate In Word Rs. Amount

297 Supplying and erecting approved make 3 HP DOL type motor control 1.00 Each 47062.00 RS: Forty Seven Thousand

cubical panel made from 16 G. CRCA sheet duly epoxy powder Sixty Two only

painted inside and outside with hinged doors and locking arrangement

Floor Mounting On 300 mm Height with MS Stand Angle & CC

Foundation. Size 35 mm (H) x 35 mm (W) x 05 mm (D). The detail

specification & quantity of material used are as under.

Panel must be with minilec.....

........... relay for auotmatic change over for pump 1 & 2 logically

without using manually change over switch (Minimum Panel Size:

meter (H) x 1.10 meter (W) x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating:

63 Amp., Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating:

0-60 Amp., Make: Meco, Qty: 01 No. (3) Ammeter Selector Switch,

Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No. (4) Digital Voltmeter

(SR-65), Rating: 0-500 V, Make: Meco, Qty: 01 No. (5) Volt Selector

Switch, Rating: 6 Amp., ......

..........Rotary, Make: Salzer, Qty: 01 No. (6) C.T.- Current Transformer,

Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos. (7) Indicating Lamps

(R,Y,B), Rating: 22.5 mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB

, Rating: 20 Amp., Make: L&T , Qty: 03 Nos. (9) Control Wiring,

Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10) Copper Busbar,

Rating: 63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Outgoing Feeder (3 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10

KA, Rating: 20 Amp., Make: L&T, Qty: 02 Nos. (2) Power Contactor

(415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos. (3) Over

Load Relay, Rating: 6-10 Amp., Make: L&T, Qty: 02 Nos. (4) Digital

Ameter (SR-65), Rating: 0-20 Amp., Make: Meco, Qty: 02 Nos., (5)

Digital Voltmeter (SR-65), Rating: 0-500 V, Make: .........

..........Meco, Qty: 02 Nos. (6) Indicating Lamps (Start,Run,Trip),

Rating: 22.5 mm LED, Make: Airon, Qty: 04 Nos. (7) Push Button

(Start,Stop), Rating: 22.5 mm, Make: Airon, Qty: 02 Nos. (8) SPP,

Rating: 415 V, Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per

Amp., Make: Airon, Qty: 04 Nos. (10) Control Wiring, Rating:

Sq.mm., Make: Any ISI, Qty: Lot (11) Power Wiring, Rating: As Per

Amp., Make: Any ISI, Qty: Lot

Description Total Qty Unit Rate Rate In Word Rs. Amount

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA,

Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP Type,

Rating: 2 KVAr, Make: Concap, Qty: 01 No., (3) Power wiring, Rating:

As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA,

Rating: 32 Amp., Make: L&T, Qty: 01 No. (2) Power wiring, Rating: As

Per Amp. (3) Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-

10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

298 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve - 3.00 Each 1010.00 RS: One Thousand Ten

ISI marked suitable for following size (A) 50 mm dia. only

299 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect 1.00 Each 232.00 RS: Two Hundred Thirty Two

suitable kitkat fuse / MCB to be . erected on polished wooden board only

inside the box with hinged/sliding door with rubber rings and erected

on pole with suitable pole clamp, all duly painted with one coat of red

oxide and two coats of paints. (Cost of Fuse / MCB shall be taken

extra) [Provision for motors cable joints near sump]

300 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 20.00 Mtr. 103.00 RS: One Hundred Three

flexible Submersible copper cable approved make of following Size. only

[d] 3 Core x 2.5 Sq. mm

301 Providing water proof straight joint in PVC insulated flat flexible copper 2.00 Each 188.00 RS: One Hundred Eighty Eight

cable by using insulated material water proofing material and making only

the joint complete. UP to 10 Sq.mm

302 Supplying, Erecting, Testing & Commissioning the 10 1.00 Each 1059757.00 RS: Ten lac Fifty Nine Thousand

passengers, Basement or Ground plus 2 upper floors Seven Hundred Fifty Seven

with Rated Speed of 1.0 m/sec with micro processor/PLC only

control and ACVVVF drive Lift having following main features:

[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift

duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of

proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and

door operation which shall be full collective selective operation hall

call demand response, UP/DOWN hall stops, Main, Up/Down

Contactor with overload and phase reversal relay and safety controls.

Description Total Qty Unit Rate Rate In Word Rs. Amount

[3] Car with M.S. platform with bracings of adequate size and to

sustain the impact load cabin + passenger with safety factor of fire for

steel and side panels of Stainless steel of sheet of grade S.S.

(minimum 1.2 mm thickness) duty. Car ceiling will be S.S. finishes

with aesthetic appearance with LED .......

..........ceiling lights (designed as per Engineer-in-charge). Car flooring

shall be of S.S. 304 chequer plate (minimum 3 mm thickness) design

suggested of engineer-in-charge. Car doors shall be of stainless steel

grade 304 (minimum 1.2 mm thickness), hairline finish with centre

opening doors. Car panel .....

......will also be S.S. 304 (minimum 1.2 mm thickness) finished with

emergency stop device, mechanical door safety device, facility of

auto/attended mode. All car panel buttons (vandal proof) and all floor

switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hours (certificate must be

submitted) shall be fully automatic centre opening (with overlapping

arrangement) made of hairline finish steel grade of SS 304 (minimum

1.2 mm thickness) with key holes and infrared curtains with Unlocking

facility from ........

...........outside

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.

[7] Full height infra ......

...........red curtain with multiple cross / crossing light beams shall be

[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation (Manual Cranking

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers/Hydraulic buffers shall be provided as

per passenger capacity and lift speed.

[11] Car fan as per......

Description Total Qty Unit Rate Rate In Word Rs. Amount

.............. passenger capacity with automatic sleep timer shall be

[12] Voice annunciater with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters

shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per

actual site parameters and submission of calibration certificate

submission, door key .......

........holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, lifting hook of appropriate size and

capacity in slab casting of machine room

[16] In the hoist way fascia plate shall be provided without any extra

cost, where ever required as / if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like 4P For

Machine & 2P For Car cabin Lighting RCCB in all circuit, for lift

machine room and lift well with proper numbers of light points, with

fixtures, exhaust fan and plug points shall be provided by the agency

(As Per Tender Item .......

......separate payment done for it ) and 3 phase Power Supply shall be

made available by in lift machine room (As Per Tender Item separate

payment done for it).

[18] Any civil/ electrical works for additional and alteration in lift shaft

and machine room related to erection of lift shall be made by lift

agency without any extra cost. .......

............(granite/marble fixing around all landing door openings are not

in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift

inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car

[20A] As Per Statutory Requirement Of Govt Of Gujarat Lift &

Escalator Act 2000, Lift Agency Has To Provide.

1.Car Top Safety Barried

2.Push & Talk Communication system

3.Fireman's Switch Operation At Ground Floor

4.Carrying out ........

Description Total Qty Unit Rate Rate In Word Rs. Amount

.......third party lift inspection during/after lift erection and provide

report by third party authorized by concern licensing authority

[21] Car Panel Operating Buttons (Vandal proof) at an accessible

height from wheelchair for handicapped person and raised numbers

with brail mark with floor position ........

........indicator/buttons must be of Auto Glow type clearly visible when

view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of

hairline finish steel grade of SS 304 should be provided at appropriate

900 mm height on the Rear & Side Wall Panels in Lift Car.

[23] Voltage Servo Stabilizer Rate Is Included In Lift Item So no

Separete Pyment Will Be Given To Agency.Its Warrenty Will Be

Applicable Up To Defect Liability.With Necessary KVA rating voltage

controlled Stabilizer (as per starting current and running current

capacity of lift machine and ........

.........with bypass switch operation) suitable for Lift machine controller,

drive and all equipmentsof lift. Voltage stabilizer must be installed at

[24] Necessary rating of DP ELCB(car Cabin) and FP ELCB(For Lift

Machine) required for lift is in scope of work which rating is sugested

by CEICED Department (Electrical Inspector)

[25] Factory inspection for verification of quality, workmanship and as

per drawing & testing before dispatch the material as per tender

[26] Inverter/UPS/Battery for ARD Unit to be covered with lock and

Key Powder Coated Box and fix it to be suitable height on Wall.

[27] Lift Panels shall be supplied with Seven Tank chemical process

which shall be carried out before applying painting, painted with

powder coating & IP 55 protection and all lift Cables must be erected

in 16 SWG Raceway..........

......... made from Galvanised.

[28] Advanced Control system dual 32 bit embedded microprocessor

with CANBUS serial communication mode operation on site

programming facility, anti nuisance, pre-opening, BMS/RMS system

supporting hardware & Software. False call Canceling/Anti Nuisance

facility Shall Be Provided.

[29] If there will be .......

Description Total Qty Unit Rate Rate In Word Rs. Amount

........any accident occurs during installation and maintenance work of

Lift work ,lift OEM and civil agency is responsible for that.they have to

make necessary Safety arrangement to avoid accident

Before/During/after Execution on site. GSPHCL and police

department will not be responsible for that.

303 Executing comprehensive (All-in-All) service & manitenance (Including 1.00 Job 116573.00 RS: One lac Sixteen Thousand

replacement of battery For ARD) with spare parts as per terms & Five Hundred Seventy Three

condition of tender lift manufacturer for defect liability period.For that only

main agency has to give All-in-All comprehensive maintenance

contract to lift manufacturer and copy of this contract will be submitted

before final bill. Agency has to quote rate accordingly. Agency has to

also provide the fitness certificate from lift manufacturer and submit to

G.S.P.H.C.L. Agency ......

.............has to submit FDR of approved bank as per clause 2.0,

section 3, of Rs. 116573.00+GST or quoted amount whichever is

higher to G.S.P.H.C.L. for minimum maturity period of Four years in

favour of GSPHC, Which will be released after successful completion

of AMC & at the End of defect liability period. lift OEM has to mantain

written record of service & maintenance during defect liability daily

period duly sigh by police dept. and .......

...........submited regularly to GSPHCL. Lift agency has to do

maintenance as per terms & condition alternate in tender. Also Lift

OEM agency should have proper dress code or identity card during

any work ralated to lift due to safety reasons and authentication to get

sign of Police Man. For delay in rectifing the fault, penalty will be

deduced from agency S.D.Whenever agency applied to final S.D. to

be released to department.All Lift licenses are within Validity period of

use.In case it is expired then agency has to renew lift licence.No

drawings,documents & liasoning work.

304 Providing & erecting necessary modular Cat. II type Light Points, Fan 1.00 Job 13631.00 RS: Thirteen Thousand Six

points,power plug point, and Loop points wiring open / concealed type Hundred Thirty One only

as per site requirement with all accessories included in lift well and

machine room. Also work includes ceiling fan, exhaust fan, Tubelight

fittings in machine room and bulkhead fitting in Lift well.

(Agency has to do work as per Necessary drawings given by Lift OEM

and approved by GSPHCL) (Ligh point, Fan point, Loop point, Ceiling

fan, Tubelight, Bulkhead fitting etc. specifications are as per given in

Description Total Qty Unit Rate Rate In Word Rs. Amount

305 Providing, erecting, fabricating the M.S. structure as per requirement 500.00 kg 77.00 RS: Seventy Seven only

of site as per structure design Including proper size approved by EIC

of M.S. angles, flats, bars, square pipe, channels, sections

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding

and finishing duly painted with Asian/Nerolac make premium quality

oil paint and true care red oxide metal primer,asian paint make with

erection on site as per direction of engineer in charge with necessary

grouting cementing, plastering and finishing complete. All hole

opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

306 Supplying & erecting bank of all polypropylene condenser (APP type) 20.00 KVAR 690.00 RS: Six Hundred Ninty

with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of P.F. only

correction for operation on 3 phase 50 c/s, 400 /440V (+ / - 10%) with

externally discharging resistance, earthing terminal & built on angle

iron of channel iron frame work and provided with terminal cover box.

Complete erected on provided iron bracket or on floor duly tested by

307 Supplying and erecting, commissioning and testing 50 KVA Diesel 1.00 Each 776739.00 RS: Seven lac Seventy Six

Generating set as per the latest CPCBIV+ norms having continuous Thousand Seven Hundred Thirty

rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally Nine only

enclosed Water cooled diesel engine with multi-cylinders Inline

arrangment developing suitable BHP not less than following capacity

at 1500 RPM with 10% overload for one hour in 24 hours Cost

including liaison work i.e. .......

.........Preparation of site plan tracing & its blue prints, Site plan

approval from Energy & Petro. div., KWH Meter testing for D.G. Set,

Site test report & other license stamped letter issuing, Certificate from

Elect. Inspector, Registration at Elect. Duty wing, Kutch. D.G.Set

inclusive::: Testing: Testing means full load & 10% over load testing of

D.G.Set at Company / Dealer work shop. Cost inclusive of Diesel, To

& Fro Fair, Lodging boarding etc. of two .........

...........engineer of corporation. Also full Diesel tank with diesel (

100% ) At the time of handing over D.G.Set to Benficial. 200 Ltr

Capacity Heavy Duty standard oil M.S./PVC Barrel & Diesel Filling

hand Pump of required capacity.Agency has to give service & All in All

maintanance contract As per tender Item to OEM. During defect

liability Period .Agency has to replace oil,Diesel filter,air filter,filing up

DEF ( Diesel Exhuast Liquid ) etc as per ........

Description Total Qty Unit Rate Rate In Word Rs. Amount

............site reguirement and OEM Guideline & working hour of D.G

set. Agency has to Provide fitness certificate at time of final SD

release.)..All parts of the DG set are warranted for the defect liability

period and the agency will replace them free of charge in case of

manufacturing defects, transport damage or lack of regular service.

The details Specification of DG se is As Per Annexure 50 KVA

308 Executing comprehensive (All-in-All) service & maintenance with 1.00 Each 51198.00 RS: Fifty One Thousand One

spare parts as per terms & condition of tender Of DG Set agency for Hundred Ninty Eight only

defect liability period. For that main agency has to give All-in-All

comprehensive maintenance contract to DG set OEM/Authorised

dealer and copy of this maintenance contract as per annexure and

FDR must be submitted.......

.......... with final bill. Agency has to submit FDR of approved bank as

per clause 2.0, section 3, of Rs. 51198.00 or quoted amount (as per

tender premium % above) which ever is higher to G.S.P.H.C.L. for

minimum maturity period of Four years in favour of G.S.P.H.C.L.,

Which will be released after successful completion of AMC & at the

end of defect liability period. DG .......

..........set agency has to maintain written record of service &

maintenance during defect liability period duly sign by police dept. and

submitted regularly to G.S.P.H.C.L. DG set agency has to do

maintenance as per terms & condition in tender. Agency has keep

D.G. set for continuous trouble free operation during defect liability

period as per given list.

1) Replacing the fuel filters & Oil filters.

2) Checking the alignment and tappet setting.

3) Checking the carbon brushes / AVE.

4) Checking the oil level and replace the oil.

5) Leakages IN/OUT Cylinder.

6) All Electrical wrings ........

.........including AMF panel if available.

7) Dynamo Setting.

8) RPM setting, Frequency & Voltage Adjustment.

9) Replacing material like fuel filters, gasket, tappet covers, diode