Special Repair to Fresh Group Bldg T 29 at 48 I SUP PL ASC Provn of shed at Furniture Yard Provn of Parking space for Clerk Staff near Bldg No P 530 at Stn HQ Provn of Parking shed Near T 16 ICU at MH and Spl Repair of Static Water Tank of 500 KL C

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. (481+236+116+30)

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. (22+25+4)

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.

M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) including cover fillet, complete all as specified and directed.

M & L for anodised GI snap grid frame work of grid size 605x605mm for false ceiling. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's, complete all as specified and as directed.

M & L for non asbestos fibre cement building board 4mm thick in ceiling fixed or laid/inserted to timber/GI/Aluminium frame work with screw, complete all as specified and as directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed. (2+5.35)

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 50 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed. (2+5.35)

Material and labour for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces finished even and fair (without using extra cement), complete all as specified and as directed.

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.

M & L for preparation of new plastered surfaces and applying two coats of 'Birla White wall care putty' or 'JK Wall Care putty' to make the entire surface free from undulations, complete all as specified and as directed.

M & L for preparing new putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on wall surfaces, complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

All as per item No. 16, here-in-before but exc but n.exc 1.00 Sqm each but n.exc. 4 Sqm,

S & F framed work as in doors or gates of angle or other section with gusset plates complete doors etc., to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete.

S & F 1.00mm thick mild steel plain black sheet in covering to door chowkhat (frames) cut to size beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed by Engr-In-Charge .

S & F framed work such as grill grating etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors and similar works conforming to Fe-410-0 or Fe 310-0 including all necessary welding complete all as specified and directed by Engr-In-Charge.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified by Engr-in-Charge

S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F anodised aluminium window and ventilators shutters, partition fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazzing clips, roller, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375 X 250 X 7mm / 450x300x7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick cement plaster in CM (1:3), complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in skirting, dado, etc., over and including 15mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.(38+60+32+15)

M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying two coats of distemper oil emulsion over and including wall care putty of wall, complete all as specified and directed.

M & L for preparation of old treated plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed. (9+5)

M & L for 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate including finished surface even and fair without using extra cement as in plinth protection including necessary formwork of edge, all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr interval and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio (1:3).

Excavation in post holes(or similar holes) each n.exc. 0.5 Cum in any kind of soil getting out, and removing surplus soil to a distance n.exc 50 mtr and making good of surfaces all as directed.(20+12+6)

S & F posts and struts including cutting tops to shape as directed, including all necessary drilling, bolting or rivetting, etc., and similar work conforming to Fe-290, Gde E-165, complete all as directed. (1090+150)

S & F steel work in tubular trusses (including special shaped washer etc. complete using any dia of MS pipe medium grade cut to length and fixed to wall for tubular roof trusses (framed), trussed purlins, etc., complete all as specified and directed by Engr-in-Charge. (1210+325)

M & L for PCC (1:2:4) type B2 40mm graded stone aggregate as in foundation filling and mass concrete etc., Complete all as specified. (6+2.10+1)

S & F steel work in tubular square, rectangular, circular in section trussed purlins crane gantries, rails and fastening and heavy framing or flat sections, including distance pieces, cleat main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to Fe 410-W (grade E-250) etc., complete all as specified and directed by Engr-in-Charge.

M & L non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.06 sqm but n.exe.0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15mm thick in CM(1:4) as in backing coat to receive tiles on brickwork or concrete surfaces , complete all as specified and as directed.

M & L for 40mm thick PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as base of floor, complete all as specified and as directed.

M & L glazed ceramic coloured joint free tiles on vertical surfaces 350 X 250 X 7mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

Supply only liquid integral water proofing compound of an approved make.

Taking down carefully any type of point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .

M & L for point wiring for one light/ fan point/call bell controlled by one switch with 1100 volt grade PVC insulated FRLS 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.0 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed.

All as per item No 47 above but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete.

All as per item No 47 above but 1.5 Sq mm for 5 Amp socket outlet on independent board with 1.5 Sq mm earth wire complete.

M & L for point wiring for 15 Amp power point controlled by one 15 Amp switch with 1100 volt grade PVC insulated-unsheathed 2.5 Sqmm multistranded copper conductor cable with continuous earth wire of 2.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed. drawn in and including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed. Note: Proper colour coding to be adopted.

All as per item No 50 above but point wiring with 4 Sq mm single core copper donductor cable and earth continuity wire with 4 Sq mm single core cable for AC point.

S & F switch piano type 5 Amp 230 volt one way flush type complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal, complete all as specified and as directed.

S & F socket outlet 2 in 1, 3 pin 5 and 15 Amp flush type 230 volt, flush type universal, complete all as specified.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

S & F lamp holder PVC polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified and as directed.

S & F LED bulb capacity 15 watts lumen output (500) length, 102 mm dia 56 mm base cap, B22 (ISI marked), complete with accessories base (ISI marked) all as specified and directed by Engr-in-Charge. Car Part No. LHLDERHEML8X015 of Havells or its equivalent of Bajaj/Phillips/Crompton Greaves.

Supply and fixing LED lights fittng 1x22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible conductor cable of suitable size from ceiling rose, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.

Supply and fixing LED lights fittng 1x9 W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper condutor cable of suitable size, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.

S & F exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades and frame and louvers, complete all as specified and as directed. Make: HAVELLS/BAJAJ/USHA/CROMPTON GREAVES/KHAITAN.

S & F sheet metal enclosures for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 12 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F sheet metal enclosures for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 8 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F sheet metal enclosures for DBs when MCBs to be used as vertical tripple pole and neutral (VTPN) double door 240 volts, 4 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F sheet metal enclosures with metal socket plug top and MCBs having single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 V, complete all as specified and as directed.

Supply and fixing 240V, 10 kA 'C' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB, complete with connection testing and commissioning, complete all as specified and as directed. Make: Indoasian or its equivalent in Havells/Standard/L&T.

Supply and fixing 240V, 10 kA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB, DB, complete with connection testing and commissioning, complete all as specified and as directed. Make: Indoasian or its equivalent in Havells/Standard/L&T.

S & F MCCB, 4 pole, 415 V, fixed type, 63 Amps with breaking capacity 16 kA duly ISI marked complete all as specified and as directed. Make: Indoasian or its equivalent in Havells/Standard/L&T.

M & L for sub-main wiring with 2 runs of 6 Sqmm PVC insulated multi stranded FRLS copper conductor cable drawn through PVC concealed conduit not less than 25 mm with all fixing accessories along with one run of 6 Sqmm solid copper cable as earth continuity conductor, complete all as specified and as directed. Note:- (i) Two runs of 6 Sqmm and one run of 6 Sq mm cable as earth along with PVC conduit will be measured as one length. (ii) Proper colour coding to be adopted.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated screebedm PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 50 Sq mm, 3.5 core nominal cross section including testing , complete all as specified and as directed by Engr-in-Charge.

M & L for Air termination, single pointed aluminium rod 12mm dia and 300 mm long, complete all as specified and directed.

M & L for aluminium strip 25x3.15 mm with saddles, DNB insulator and fixing screws etc., for roof conductors and down condutors, complete all as directed.

M & L for TEST POINT TERMINAL block of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos, 8mm dia, 25mm long, hexagonal head screw, complete all as directed and as specified by Engr-in-Charge.

M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to GI earth strip of size 25x4 mm (upto 7.5 metre in length from earth plate) by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 40 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

Kunwar Constructions Private Limited.

M/s Ray construction

M/S ROHIT CONSTUCTION

M/S SHAMBHU SHARAN SINGH

Modernage Constructions Pvt. Ltd.