Loading
Loading…
Loading…
Tender Value
₹9.9 L
EMD Value
₹20,000
Closing Date
9 Sept 2026, 1:00 pm
DY CE(E)/IGWTP
IGWTP/BARRACKPORE Pin-700120
IMPROVEMENT OF SLUDGE EXTRACTION DRAIN VALVE ARRANGEMENTS ATTACHED WITH THE PULSATOR TYPE CLARIFIERS UNDER MODULE 1 HAVING CAPACITY OF 20 MGD AT IGWTP
2026_KMC_1037465_1
KMC/WS/IGWTP/007/26-27, DT-03/08/2026
Open Tender
MECHANICAL
Percentage
45 days
IGWTP/BARRACKPORE
As per Nit
4 documents required · 4 mandatory
₹0
₹20,000
Office of the EE/IGWTP
11 Aug 2026
11 Aug 2026
11 Sept 2026
11 Aug 2026
9 Sept 2026
25 Aug 2026
18 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | PART-A | - | - | - | - |
| 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof (b) above 150 mm. thick | 1.5 | CUBIC METER | 1,417 | ₹2,125.5 |
| 2 | CHAPTER - III TAKING OUT PIPES AND SPECIALS Cast Iron / Ductile Iron Pipes and Specials M.S. Pipes and Specials Taking out sluice valve by unscrewing nuts and bolts carefully and stacking the same within a lead of 30M including bailing out water from the Sluicevalve chamber due to normal seepage. if any. all complete as per direction of the Engineer-in-Charge. (Dismantling of Sluice Value Chcmber, where necessary. shall be paid extra as per relevant items of Schedule of Rates) Diameter in mm 80-150 | 9 | EACH | 76 | ₹684 |
| 3 | CHAPTER - III TAKING OUT PIPES AND SPECIALS Cast Iron / Ductile Iron Pipes and Specials M.S. Pipes and Specials Taking out sluice valve by unscrewing nuts and bolts carefully and stacking the same within a lead of 30M including bailing out water from the Sluicevalve chamber due to normal seepage. if any. all complete as per direction of the Engineer-in-Charge. (Dismantling of Sluice Value Chcmber, where necessary. shall be paid extra as per relevant items of Schedule of Rates) Diameter in mm 200 | 6 | EACH | 97 | ₹582 |
| 4 | Ductile iron double flanged manually operated sluice valve generally conforming to IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non- rising stainless steel AISI-410 spindle valves suitable formaximum working pressure of 10 kg/cm... and body tested 15 kg/cm..., flanges flat faced and drilled to IS: 1538 :1993. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device.Diameter in mm 100 | 9 | EACH | 10,794 | ₹97,146 |
| 5 | Ductile iron double flanged manually operated sluice valve generally conforming to IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non- rising stainless steel AISI-410 spindle valves suitable formaximum working pressure of 10 kg/cm... and body tested 15 kg/cm..., flanges flat faced and drilled to IS: 1538 :1993. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device.Diameter in mm 200 | 6 | EACH | 29,744 | ₹1,78,464 |
| 6 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness - 20mm -22mm NB Diameter in mm 100 | 24 | EACH | 635 | ₹15,240 |
| 7 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness - 20mm -22mm NB Diameter in mm 200 | 18 | EACH | 1,732 | ₹31,176 |
| 8 | Supply of Flat Rubber Gasket of EPDM Quality with ISI Mark to IS: 5382/1985 Type-4 suitable for flange joint, drilled to IS: 1538 (Table ... VI). The gasket should have dual thickness 3/6mm with 6 mm thickness at the sealing cross section.100mm dia | 36 | EACH | 80 | ₹2,880 |
| 9 | Supply of Flat Rubber Gasket of EPDM Quality with ISI Mark to IS: 5382/1985 Type-4 suitable for flange joint, drilled to IS: 1538 (Table ... VI). The gasket should have dual thickness 3/6mm with 6 mm thickness at the sealing cross section.200mm dia | 24 | EACH | 159 | ₹3,816 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
tecbid.pdf
Tender Documents • 3.73 MB
BOQ_2548573.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].