Providing Sewerage Scheme to Rajgarh Town Tehsil Rajgarh Distt. Sirmour

Amount

Second class brick work using common burnt clay building bricks in supper structure in cement mortar 1:6 (1cment:6 sand) 2nd Class bricks

Providing form work with steel plates 3.15mm thick and welded with angle iron frame of 30x30x5mm so as to give a frame of fair finish including centring, shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu reinforced concrete and plain concrete work in, floors etc. up to 200 mm in thickness.

Providing and laying cement concrete 1 :1.5:3 ( 1 cement :1.5sand :3 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of work in lintels, beams, girders, bressumers, and cantilever, up to floor two level.

Providing Mild steel/Tor steel reinforcement for R.C.C. work including bending binding and placing in position : Tor Steel

Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position. First Class Deodar Wood class Deodar wood

Providing 40x3mm flat iron hold fast 40 Cm long including fixing to frames 10mm diameter bolts and nuts and wooden plug and embended in cement concrete block 30x10x15 Cm. In1:3:6 (1 cement :3 sand :6 gradedstone agg. 20mm nominal size)

Providing and fixing panelled glazed shutters for doors windows including black enamelled iron butts, hings,with necessory screws in First class deodar/kail wood

Providing and fixing wire gauge shutter using galvanised mild steel wire gauge of I.S. gauge designation 85 G. with wire of dia . 0.56 mm for doors ,window and clear story windows including bright finished blck enammelled iron hings with necessary screws : 40 mm thick

15 mm cement plastering in single coat on rough side of brick/stone masonary for interior plastering up to floor two level including arrises internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in in girth and finished even and smooth in C.M.1:6 (1Cement:6 Sand)

Wall painting (Two Coats) with plastic emulsion water proof APEX paint of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty a required for making the surface.

Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter and sand papering and knotting ready mixed paint brushing wood primer pink.

Painting one coat ( excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt and dust and other foreign matter sand papering and knotting ready mixed paint other than white.

White glazed tiles 6 mm thick in flooring , treads of steps and landing laid on a bed of 12mm thick cement mortar1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement. Ceramic Tiles of Kajaria Make

Providing and fixing 4mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface i/c cleaning the surface of all dirt,dust and sand papered smooth and i/c a coat of wood filler.

P/F vitreous China water closet squatting pan (European type WC pan) wall mounted work, bed conc., foot rest and trap to be size 580mm (earth measured and paid for separately)

P/F plastic seat (Solid/Hollow type) and cover for wash down water closet with CP Brass hinges and rubber buffers.

P/F 10/12.5/15 litres P.V.C. low level flushing cistern with a pair of CI or mild steel brackets complete with fittings such as lead valve less syphon 15mm nominal size brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet , out let and over flow pipes 40mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately.Including all leads lifts and carriage of material at site and as directed by the Engineer in Charge.

P/F vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excludinf fitting.

P/F 600x450mm bevelled edge miror of superior glass mounted on 6mm thick AC sheet or ply wood sheet and fixed to wooden plug with CPbrass screwed and washers.

P/F CP brass towel rail complete with CP brass brackets fixed to wooden plug with CP brass.

P/F Charomium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws.

P/F CI floor trap of self cleaning designwith sand cast iron screwed down or hinged grating with out vent arm complete i/c cost of cutting and making goods the walls and floors.

P/F brass angle valve 15mm without nuts and pipes.

Providing and fixing CP Brass bib tap with capstan head.

P/F C.P. Brass waste for wash basin and sink of floowing size for sink or wash basin. Including all leads lifts and carriage of material at site and as directed by the Engineer in Charge.

P/F PVC lead conncetion with brass union. Including all leads lifts and carriage of material at site and as directed by the Engineer in Charge.

P/F M.I. union for bash basin or sink. Including all leads lifts and carriage of material at site and as directed by the Engineer in Charge.

P/F Full way valve with wheel 15 mm

Providing and fixing plastic PVC pipe 110 mm Dia. Line from W.C. to Septic Trunk Line

Providing and fixing plastic PVC pipe 75 mm Dia. Line from Wash basin to Soak Pit

Providing and fixing plastic Cowl PVC 110 mm Dia. Line from Wash basin to Soak Pit

P/F C.P. Brass waste for wash basin and sink of floowing size for wash basin.

P/F M.I. union for wash basin

Providing and Fixing of Toilet Paper Holder of CP Brass in all respect ,including all leads lifts and carriage of material at site and as directed by the Engineer -in -charge.

Providing and Fixing of cromium plated Brass Soap Dish in all respect ,including all leads lifts and carriage of material at site and as directed by the Engineer -in -charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges.

Providing and fixing Pine Wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) 6 mm thick .

Providing and fixing 15 cm wide 45cm overall semi circular plain G.I.Sheet Gutter with iron bracket 40x3mm size bolt and nuts and washers etc.

Providing and fixing 110 mm HDPE Pipes

Providing Eves board with M.S. Sheet

Providing and fixing anodidized aluminium work for Doors ,windows ,ventilator,partition with extrauded builtup standard tubular and other section of approved make conforming to IS 733 and IS 1285 anodised Aluminium sections shall be smooth,rustfree,Straight,mitered and jointed mechenically rustfree,straight mitered and and joint mechenically whereever required including cleat angle ,aluminium snep beading for glazing /panneling CP Brass /stainless steel screws all complete. Frame for ceiling and suspenders for ceiling.

Providing and fixing Anodised Aluminium below mentioned fitting i.c anodised colour shade with bolt and nuts washers etc. Complete inall respect ,including all leds lifts and carriage of material at site and as directed by the Engineer -in- charge

Handle 100 mm

Tower Bolt 100 mm .

Hings 100 mm .

Door Sliding Bolt 250x16 mm .

Door Stopper

P/F wall to ceiling and under floors GMS tubes heavy duty including all leds lifts and carriage of material at site and as directed by the Engineer -in- charge

Toilets of Set No. 1 to 5

15 mm dia (H) interenal fittings

20 mm dia. (L)From main tank to toilets

Joginder Singh