REPAIR/MAINTENANCE TO OTM ACCOMMODATION FOR B/R WORKS OF CMP, 17 CAB, DIV CAMP AND REPAIR/REPLACEMENT OF ROOF LEAKAGE, FALSE CEILING AND CERTAIN MISCELLANEOUS B/R AND E/M ITEMS OF AGE B/R-I UNDER GE (NORTH) BINNAGURI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match as in floor complete all as specified and as directed.

M & L for 15 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounding the exposed surfaces of granite complete all as specified and as directed.

Material and labour for glazed ceramic coloured / digital printed of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to relevant IS set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note: Screed bed shall also deemed to be included in the quoted rate by the contractor.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surfaces such as skirting / dado over and including 10 mm thick screed bed / backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm to 1.00 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm to 1.00 sqm, as in vertical surfaces such as skirting / dado over and including 10 mm thick screed bed / backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specified and as directed.

M&L for PCC (1:3:6) Type C-2 (40 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for 75mm thick PCC 1:4:8 type D-2 as in sub base using 40mm graded mechanically crushed stone aggregate complete all as specified and as directed.

M&L for providing and laying of 300x300 mm & 10mm thick Anti-Skid pavement tile Endura tile of "H & R Johnson India" or equivalent in pavit or NITCO or techno commercially equivalent make as listed in List of Makes in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note: Design/pattern shall be as approved by GE at the time of exection) complete all as specified and as directed.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed

Material and labour for 80 mm thick coloured rubber moulded machine pressed precast concrete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 40 mm thick sand cushion spread and laid leveled in layers complete all as specified and as directed

Material and labour for taking down and refixing in same opening wooden shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc after necessary repair works / easing and adjusting complete all as specified and as directed

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each including Builders Harware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed

Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including Builders Harware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each including Builders Harware and removing from site complete all as specified and as directed.

S&F factory made Pressed steel frames confirming to IS , having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed.

S&F factory made Pressed steel frames confirming to IS, having profile of size 125 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (a) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk complete all as specified and as directed. Note: Stainless steel butt hinges shall be paid separately.

S&F of 30mm thick hard wood factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing of 35mm thick factory made 2nd class hard wood gauged and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

M&L for refixing of shutter of any description exc 1 Sqm and n.exc 2 Sqm each of same opening doing resecuring or easing & adjusting without taking down complete all as specified and as directed.

S&F of Stainless Steel butt hinges, medium weight of size 100mm complete all as specified and as directed.

S&F Continuous (piano) hinges, 30 mm width of flap stainless steel, bright finish or electro galvanised complete all as specified and as directed.

S&F 150 mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100 mm long stainless steel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F Hasp and staple, stainless steel of size 125 mm, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply & fixing stainless steel type handle 150mm long complete all as specified and as directed.

Supply & fixing stainless steel type handle 100mm long complete all as specified and as directed.

S&F stainless steel grade 304, sliding door bolt 300 mm long decorative (ISI marked) with bright bolt not less than 12 mm dia with and including min of 6 bolt and nuts, 4 on bolt plate and 2 on staple fixing complete all as specified and as directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.

S&F powder coated aluminium window sliding type three track (2 glazed & one gauze shutter) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.

Supply and fixed in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard door / shelves / wall paneling including 6 mm thick wooden leaping including polishing and including dismantling of old boarding complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed.

Supply and fixing in repairs 5.5mm thick tinted glass, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

Supply & fixing 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane , complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply and fixing in repairs door stopper floor 150 mm overall length of cover plate Stainless steel and tongue, anodised with hard drawn steel spring, fixed in floor fixed in position complete all as specified and as directed.

Supply and fixing in repairs 100 mm size Mortice lock, vertical type, size 4 lever (chrome) including fixing arrangement complete all as specified and as directed.

Supply and fixing in repairs aluminium body (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and as directed. Make : Godrej Cat Part No C-071 or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply & fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm+5 mm) with ready mixed pre-packed proportioned dry mix mortar blended with PP fibers, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces on external surfaces incl. transporting of material, mixing, curing, scaffolding etc finished even and fair without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

M&L for rendering 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and fair without using extra cement complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying two coats of exterior emulsion over a coat of primer etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of distemper white or tinted etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash as in ceiling etc complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

Supplying and laying of 16 mm Outer dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

Supplying and laying of 20 mm Outer dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

S&F in repair 15 mm bore fancy type bib taps with flange cast copper alloy 15 mm bore with fancy chromium plated screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: CERA Cat Part No. F-1015151 or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: CERA Cat Part No. F-1015163 or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CERA Cat Part No. F-1015361 or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repairs of Chromium plated over head shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. Make : CERA Cat Part No. F7010213AB or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20m long flexible tube and ABS wall hook in including making connections and fixed in position complete all as specified and directed. Make : CERA Cat No. F-8030401AB or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply and fixing for brass chromium plated fancy type towel rail 600 mm long complete all as specified and as directed.

S&F in repair 15 mm Brass CP single lever Wall mixer long body three in one with arrangement for both telephonic shower and overhead shower with bend pipe and connected fittings for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Cera Cat Part No. F-1003403 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F MS flat iron as in support for verandah jali, mesh including welding, drilling holes and fixed to frame with nuts red sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe-290(Gde-E-165) etc complete all as specified and as directed.

S&F in repair vitreous china wash basin counter type, white oval shape including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed. Make : CERA Cat part No. S-2030115 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repair vitreous china wash basin table top, white oval shape including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed. Make: Jaquar, Cat Part No. LYS-WHT-38901N or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply and fixed for central hole basin mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed. Make: CERA Cat part No. F-1012451 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F in repair 15mm bore pillar cock with swan neck cast copper alloy, with capstan heads, chromium plated, screwed down, fancy high pressure, with or without lettred ‘HOT or COLD’ with long screwed sunk and fly nuts complete all as specified and as directed. Make : CERA, Cat Part No F-2008105 or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White (minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

S&F in repair Sensotronic sensor flushing valve for urinal with complete kit suitable for urinal complete all as specified and as directed.

Supply and fixed in repairs white vitreous china wash down water closet pan wall hung type including concealed flushing cistern ( size of cistern 460*450*8mm) of size 545 x 345 x 360 mm with ‘P’ or 'S' trap, including fixing bolts, Plastic water closet seat cover (soft landing) and mild steel chromium plated or aluminized hinging device, including making all necessary fittings and connections complete all as specified and as directed. Make : CERA, Cat Part No S-1043136SN or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply & fixing in repairs white vitreous china wash down water closet pan floor mounted type including flushing cistern of size 645x355x675mmm with "P" of "S" trap, plastic water closet seat cover (soft landing), and mild steel chromium plated or aluminised hinging device, including making all necessary connections etc complete all as specified. Make : Jaquar, Cat Part No LYS-WHT-388515300UFSMN or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one.

Supply & fixing in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, including flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & etc complete all as specified. Make : Hindware (Comfort) or Techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Supply & fixing in repair PVC low level Twin flushing system cistern 10 ltr capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour complete all as specified and as directed.

M&L for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed .

S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CERA Cat part No. F-1015201 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE.

S & F grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and as directed.

S&F in repairs 32 mm bore and 75 cm long PVC waste pipe for WHB complete all as specified and as directed.

S&F PVC waste pipe of standard pattern, not less than 75cm long, 40 mm dia for steel sink waste cuppling or of suitable size complete all as specified and as directed.

Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified and as directed.

S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed.

S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.

Demolition of wall and ceiling board (Fibre, pulp, insulation etc.) or insulation board /slab/blankets any thickness including cover fillet complete all as specified and as directed.

Material and labour for PVC Prelaminated both side 600x600x9.5 mm Gypsum false ceiling tiles ,conforming to IS-14862: 2000 ,of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x 600 mm, T section / Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0 / 1:3 cement mortar complete all as specified and having following details:- (a) 27mm x 27 mm angle 0.55 mm thickness, GI powder coated hot dip galvanised plugged at the rate 600mm centre to centre alongwith the perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness, GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspenders (not exc. 1.20 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the perimeter of wall. Make – SAINT-GOBIN or of techno commercially equivalent make as approved by the GE. Note: The work shall be carried out as per manufacturer instruction and as directed.

Material and labour for false ceiling with GI powder coated frame work and 4 mm thick E board classic design , non asbestos fibre reinforced cement board, Reinforced Designer Board tiles conforming to IS-14862 and ISO-8336, of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x 600 mm, T section / Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0 / 1:3 cement mortar complete all as specified and having following details:- (a) 27mm x 27 mm angle 0.55 mm thickness, GI powder coated hot dip galvanised plugged at the rate 600mm centre to centre alongwith the perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness, GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspenders (not exc. 1.20 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the perimeter of wall. Note: The work shall be carried out as per manufacturer instruction and as directed.

Supply and fixing in repairs Solid PVC Wall Lining consisting of 5mm thick Single Side Prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M & L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coats of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

M & L for preparation of old treated surface of ceiling by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash / colour wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M & L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying One coat of colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

Material and labour for preparation and applying one coat of weather proof paint any tint on chequered pattern (any shape/colour) or cement surface / kerb stones surfaces including washing floors, cleaning glass, joinery etc. of drops and splashes complete all as specified and as directed.

M&L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

Dismantling of corrugated steel sheets in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixed pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified.

Supply and fixed steel tubular work in hollow tubular / square / rectangle section as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc. conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

Supply and fixed in repair stainless steel curtain rod 25 mm dia with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 500 ltrs and n.exc 1000 ltrs setting a side (or lowering if required for repairs, cleaning etc reconnecting and refixing in same position after completion of roof treatment complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage(cylindrical vertical with closed top) hoisted and fixed in positions including necessary fittings all specified in SSR Part I complete all as specified and as directed.

S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete all as specified and as directed.

Taking down existing roof treatment (water proofing membrane etc) including screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50 m and n. exc. 100 m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust, etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick screed bed on roof slab concrete surfaces, in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bituminous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Notes :- (i) Laying APP based polymeric membrane shall be done torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of Aluminium paint over APP membrane.) (iv) Treatment shall be done by authorise applicator of the firm (v) Cutting groove in brick wall 75 mm wide & 65 mm deep and sloping horizontal face of groves with cement mortar 1:3 , complete all as specified and as directed.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying as specified below or manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard @0.75Kg/sqm. (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.

M&L for waterproof cement based putty of one coat and sand papering surfaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with roller including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surfaces on wall / ceiling / chajjas and applying Two or more coats of 10-0% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick works with fly ash bricks straight or curved on plain exc mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls, chajja, facia, roof projection etc by washing, rubbing down and stopping and applying one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of walls including cleaning glass, joinery electrical fittings, wiring etc; of drops and splashes complete all as specified and as directed.

M & L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down carefully existing old/unserviceable sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete for one Light point controlled by one, one way switch complete all as specified and as directed.

All as per item Ser No 137 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item Ser No 137 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item Ser No 137 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item Ser No 137 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.

All as per item Ser No 137 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F of switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

S&F of Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S & F deluxe fan electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts withpre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cable from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia , MS clamp, nut, bolt and washers including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F of Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F in repair modular switch 6 Amp of one module complete all as specified and as directed.

S&F in repair modular switch 16 Amp of one module complete all as specified and as directed.

S&F in repair Modular socket 6 Amp 2/3 Pin combined 2 module 230 volt flush type complete all as specified and as directed.

S&F in repair Modular socket 6/16 Amp 2/3 Pin combined 2 module 230 volt flush type complete all as specified and as directed.

S & F in repair modular fan regulator 120W 230 volts AC 50 Hz 2 modules complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non- metallic conduit including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. Note: Two runs of sub main wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

All as per item No 161 above but using two runs 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F in repairs MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one as specified and as directed.

S&F in repairs MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F in repairs epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection complete all as specified and as directed.

M/s. RAMPHAL GARG

M S S DASGUPTA

M/S PAWAN ENTERPRISE

Shri Amarnath Sah