Construction of 50 bedded Civil Hospital at Banjar District Kullu HP SH Providing Electrical Installation therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. Group C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. Group C.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge. Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way, 5/6 amps piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge. i) 3 x 1.5 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. i) 50 mm. dia.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required: approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. i) Bulk head fitting, CFL type (Category-A)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. i) Exhaust Fan, Heavy duty, 300 mm sweep

Extra for fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge. i) 40 mm dia. G.I. pipe, heavy class

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

25 Liter capacity water heater (Cat-A)

10 Liter capacity water heater (Cat-A)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Double door-4 way

Double door-8 way

Double door-12 way

Double door-16 way

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Double door-8 way (8+24),horizontal type

Double door-12 way (8+36),horizontal type

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

63 Amp. Category-A

100 Amp. Category-A

200 Amp. Category-A

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge i) 400 Amp. Category-A

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required approved makecomplete in all respect as per entire satisfaction of Engineer-in-Charge. i) 200 Amps.

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

63 Amp. Category-A

100 Amp. Category-A

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 63 Amp. 415 volts capacity 4 No. each of cross-sectional area (16mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (31.75mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 500 Amp. 415 volts capacity 4 No. each of cross-sectional area (50.80mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. . i) Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Double pole. Cat-A.

Triple pole & Neutral. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. i) 63 Amps. Cat-A.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. ( for horizontal run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor ( for vertical run) as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 50 mm x 50 mm x 6 mm thick duly welded complete with 3mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. . i) 450 mm deep (nominal)

Providing, Installation, testing and commissioning of ceiling fan with step type fan regulator white in colour having Cat No-CG 20826 C&S Make including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

ceiling fan 1200mm sweep

ceiling fan 1400mm sweep

Supplying and fixing wooden box 203mmx152mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket 3Nos outlet and 5/6 amps, piano type switch, 3Nos. connections, painting etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. .

Supplying errection, testing and commissioning of LED bulb 9watt available with B-22/E-27 as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing LED Surface mounted LED Flat pannel 1x1 Luminair Make of die cast aluminium housing with high efficient LEDs & glare free opal diffuser IP20 luminair Make Halonix Cat No. HLFPS11-02-24WW-11 complete with connection, testing commissioning etc.as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing 18Watt T-5 Indoor decorative LED BATTEN WITH EXTRUCTED ALUMINIUM HOUSING AND OPAL DIFFUSER including LED Rod Halonixhaving item code HLB-03-18-CW-AL and Rod Cat NO HTL84DPC18CW testing and commissioning as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing LED Street linght with lens made of pressure kie cast aluminium housing and enclosed with toughened glass IP66 luminair make Halonix Cat No. HLSLD-09-30-CWL-EL complete with connection, testing commissioning etc as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing LED Street linght with lens made of pressure kie cast aluminium housing and enclosed with toughened glass IP66 luminair make Halonix Cat No. HLSLD-09-15-CWL-EL complete with connection, testing commissioning etc as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing LED Surface mounted LED flat pannel 2x2 Made of CRCA Sheet duly powder coated with high efficient LEDS & glare free full opal diffuser IP 20 luminair MakeHalonixCat No. HLFPS22-02 -36 W-11 complete with Connection, testing commissioning etc as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and fixing surface mounting LED slim round down lighter with high efficient LEDS and glare freeopal Halonix as per Cat No. HLDLS-R06-15 Watt including connection etc as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing 10 Watt LUXMAX LED Tube light made of Alum. Extruded profiles, Suitable for fixture mounted on surface/ceiling.Make Twinkle Cat No.LUX-TL-9 as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying and installation of meter module in the existing panel including testing connection, installation and commissioning etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge. .

3 Ph LED Ammeter CI 0.5 , 3 Ph LED Voltmeter CI 0.5, Indicating Light (Red, Yellow & Blue)

Supplying & fixing Air Conditioner of IFB make 1.5 tone capacity Split type invertor series Hot & Cold having Cat No. IACS18JCHTGC including voltage stabilizer 4 KVA 130up volts AC supply and stand, Copper pipe, drain pipe for outdoor AC unit complete with installation connection etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Supplying & fixing Air Conditioner of IFB make 1.5 tone capacity Split type Cold having Cat No. IACS18IA5TGC including voltage stabilizer 2 KVA 130up volts AC supply and stand, copper pipe, drain pipe for outdoor AC unit complete with installation connection etc. as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

Providing and fixing 2x18 Watt LUXMAX Channel for LED tubes made of CRCA steel, Powder coated suitablw for surface/ ceiling Mounting.Cat No. Channel Box as required approved make complete in all respect as per entire satisfaction of Engineer-in-Charge.

AKSHAY KUMAR